• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.253-260
• /
• 2014

Purpose: This study investigated the harvesting properties of the giant miscanthus (Miscanthus ${\times}$ giganteus) to measure the required mowing power for different stem conditioning methods in order to shorten the drying time after mowing and the bale density so that the crop can be used as biomass in the winter season. Methods: The required mowing power and bale density were measured using a power measurement device, three different mower-conditioners, and a mid-sized round baler under different working speeds and conditioning methods. Results: For the various mower-conditioners, the average stem length from mowing was 0.86-0.91 m, and the available working speed was 1.6 m/s. The steel roller-type mower-conditioner showed better stem conditioning but could not mow over a working speed of 1.6 m/s. The required average power of the mower-conditioners varied from 23.8 kW for the steel roller-type rotary disk mower-conditioner with a working width of 2.4 m to 37.2 kW for the flail-type rotary disk mower-conditioner with a working width of 3.2 m at a working speed of 1.6 m/s. The bale densities were $155.8-172.2kg/m^3$. The highest bale density was measured for stems with no conditioning and a moisture content of 11.3% (d.b.) mowed by the rotary disk mower. The bale density was affected by the mowing method because of the low moisture content of the miscanthus stems. Conclusions: In terms of the working performance and conditioning statue, the steel roller-type mower-conditioner is a better choice at a working width of 2.4 m, while the flail finger-type mower-conditioner is better at a working width of 3.2 m. The type of mower-conditioner used for giant miscanthus harvesting should be determined by considering the harvest area, workable period, and working performance of a mower-conditioner and baler during the winter.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.160-161
• /
• 2017

In In this study, we measured the relative density and the compressive strength in order to select the appropriate W/B for the ultra-high strength concrete development. If W/B is lowered than the W/B of highest relative density, it was confirmed that the strength is lowered. However, if water is increased than the W/B, the relative density is decreased compressive strength was similar. The selection of the W/B of the lower than the highest relative density is not appropriate. Appropriate W/B is selected to be more than the maximum relative density of W/B. This was confirmed for TG-DTA.

• Geomechanics and Engineering
• /
• v.6 no.6
• /
• pp.613-624
• /
• 2014

The fractures in coal are the main migration and output channels of coalbed methane, directly influencing the permeability of the coal seams. It is of great significance to study the effect of fracture distribution in coals on the permeability of coal seam. The development rules of endogenetic and exogenetic fractures are different among various coal lithotypes. There is also difference in the fracture density for the same lithotype with different thicknesses. Through the observation and description of the macroscopic fractures in coal and the origin of fractures in coal, the effect of the coal lithotype and its thickness on fracture development in coal was discussed. It was found through the study that the density of fractures in vitrain band was the maximum for the same coal rank and thickness, followed by clarain band. There were few fractures developed in the durain band. However, the changes of fracture density in three types of bands presented different declining trends for low, medium and high coal rank. There were no fractures developed in the fusain. There were three variation patterns for the fracture densities at the same coal rank and coal lithotype: linear decrease, nonlinear decrease, and first decrease then remaining unchanged. However, the overall trend was that the fracture density decreased with the increase of thickness of coal band for the same coal rank and coal lithotype.

• Physical Therapy Korea
• /
• v.8 no.1
• /
• pp.51-58
• /
• 2001

In children with cerebral palsy, bone density is decreased by disturbance of bone remodelling due to lack of normal weight bearing and muscle contraction through physical activity. Loss of bone density cause fracture, delays treatment with immobilization, and leads to functional limitation. The purpose of this study was to investigate bone mineral density of lumbar spine in children with spastic quadriplegia and diplegia. Six spastic quadriplegia and 14 spastic diplegia were evaluated in this study. QDR 4500 X-ray densitometer was used to measure bone density at lumbar spine (L1~L4). Children with cerebral palsy showed lower bone density than that of normal children. Bone density in children with spastic quadriplegia and diplegia was $-1.812{\pm}.962$, $-1.519{\pm}.935$, respectively. However, there was no significant differences in bone density between children with spastic quadriplegia and diplegia. There was no significant difference in bone density relation to motor development level, height, and weight. Further study is needed to find the appropriate interventions for preventing loss of bone density in children with cerebral palsy.

• Membrane and Water Treatment
• /
• v.7 no.2
• /
• pp.127-141
• /
• 2016

Electrodialysis (ED) is known to be a useful membrane process for desalination, concentration, separation, and purification in many fields. In this process, it is desirable to work at high current density in order to achieve fast desalination with the lowest possible effective membrane area. In practice, however, operating currents are restricted by the occurrence of concentration polarization phenomena. Many studies showed the occurrence of a limiting current density (LCD). The limiting current density in the electrodialysis process is an important parameter which determines the electrical resistance and the current utilization. Therefore, its reliable determination is required for designing an efficient electrodialysis plant. The purpose of this study is the development of a predictive model of the limiting current density in an electrodialysis process using response surface methodology (RSM). A two-factor central composite design (CCD) of RSM was used to analyze the effect of operation conditions (the initial salt concentration (C) and the linear flow velocity of solution to be treated (u)) on the limiting current density and to establish a regression model. All experiments were carried out on synthetic brackish water solutions using a laboratory scale electrodialysis cell. The limiting current density for each experiment was determined using the Cowan-Brown method. A suitable regression model for predicting LCD within the ranges of variables used was developed based on experimental results. The proposed mathematical quadratic model was simple. Its quality was evaluated by regression analysis and by the Analysis Of Variance, popularly known as the ANOVA.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.3
• /
• pp.314-321
• /
• 2015

We performed three sets of feeding trials to establish the optimal feed size (Exp-I), stocking density (Exp-II), and dissolved oxygen level (DO) (Exp-III) for olive flounder Paralichthys olivaceus. In Exp-1, four replicate groups of fish ($53.6{\pm}0.9g$) were fed commercial diets with three particle sizes (small, medium, and large). In Exp-II, fish ($30.0{\pm}0.1g$) were reared at four stocking densities (1.8, 3.5, 5.3, and $7.1kg/m^3$). In Exp-III, fish ($187{\pm}1.48g$) were reared under two different DO levels (2-3 and 6-7 mg/L). In Exp-I, fish fed the large-particle diet gained significantly more weight and had a lower feed conversion ratio than fish fed the small- and medium-particle diets. In Exp-II, fish reared at 1.8 and $3.5kg/m^3$ gained slightly more weight and had lower feed conversion ratios than fish reared at 5.3 and $7.1kg/m^3$, although these differences were not significant. In Exp-III, negative effects were observed in the low DO groups. Therefore, under our experimental conditions, the optimal feed particle size, stocking density, and DO level for olive flounder were 9-9.4 mm, $3.5kg/m^3$, and 6-7 mg/L, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.1-10
• /
• 2008

Recently, the Seoul Metropolitan Government (SMG) has initiated several urban redevelopment projects to revitalize the downtown well equipped for transit oriented development (TOD). Since, TOD should incur higher density development in our context, it has negative impacts on travel patterns, congestion, and urban environmental quality. The purpose of this study is to develop new transportation service index which can facilitate higher density TOD. This study includes relevant foreign case studies, the development of multimodal transportation index, and the impact analysis of TOD when it is applied in the downtown Seoul. In chapter III, it developed a so-called ITLOS, new multimodal transportation service index which shows the possibility of accommodating further development by integrating roadway service index with public transportation service index. The study sets ten policy scenarios by varying densities, and run the Seoul Congestion Management Model (SECOMM) to estimate the sustainable transportation impacts of TOD in the downtown. Travel speed index that only represents the availability of road capacity for development reveal that higher density development in the downtown can deteriorate traffic congestion while improving region-wide transportation level of service in Seoul. Also, it is proved that higher density development is more feasible when using ITLOS as the index because it considers not only available road capacity but subway capacity in the analysis area.

• Fisheries and Aquatic Sciences
• /
• v.6 no.3
• /
• pp.160-163
• /
• 2003

Mortality of several species of fish and shellfish exposed to Harmful Algal Blooms (HABs) caused by Cochlodinium polykrikoides, Heterosigam akashiwo, Alexandrium tamarense, Eutreptiella gymnastica, Heterocapsa triquetra and Prorocentrum micans was studied. When fish were exposed to a cell density of 8,000 cells $mL^{-1}$ in C. polykrikoides, $35\%$ of flatfish and darkbanded rockfish died within 48 hrs. However, jacopever rockfish had mortality of higher than $85\%$. Rock bream, filefish and red sea bream showed $100\%$ mortality within 10 hrs with an exposure cell density of 8,000 cells $mL^{-1}$. The rest of HABs except for C. polykrikoides showed that there was no fish and shellfish death throughout the 48 hrs even in the maximum cell density of 100,000 cells $mL^{-1}$ These results imply that C. polykrikoides can have a serious impact on fish mortality and it is regarded as an ichthyotoxic dinoflagellate. The fish death may be attributed to anoxia caused by a combination of the production of reactive oxygen species (ROS) and polysaccharide from C. polykrikoides during blooms.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.4
• /
• pp.406-412
• /
• 2014

To evaluate the influence of burrowing substrate on the rearing performance and ambicoloration of cultured flounder, Paralichthys olivaceus, we compared the daily food intake (DFI), feed efficiency (FE), survival, growth, proportion of pigmented skin on the blind side, and proportion of ambicolored fish. We reared juvenile flounders [total length (TL) $4.46{\pm}0.06cm$, body weight (BW) $0.77{\pm}0.03g$] in dark-green fiberglass-reinforced plastic (FRP) aquariums without (control) or with gravel substrate at a density of 200 fishes/ton for 120 days. While there was no difference in survival rate or growth, the DFI was lower and FE higher in the group raised with substrate than in the control. The proportions of pigmented area on the blind side and ambicolored fish were significantly higher in the control tank. Therefore, the supplement of substrate on the aquarium bottom positively affects the feeding efficiency, and inhibits abnormal pigmentation on the blind side in flounder farming at high density.

• International Journal of Highway Engineering
• /
• v.16 no.3
• /
• pp.21-33
• /
• 2014

PURPOSES : This study presents a specific methodology for air dispersion analysis of urban areas methodology in accordance with urban planning and transport policy. METHODS : This study performed three alternatives including development density and public transit applying integrated urban model for the Delft city on Netherlands. Based on this result, the two types of air pollutant emissions($PM_{10}$, NOx) were calculated and analyzed the emission dispersion on that City. RESULTS : As a result, the quality of air near the City is better than that of current conditions showed that approximately from 2.1 to 7.9% according to alternatives. CONCLUSIONS : Air quality assessment in urban areas can be reasonably performed by applying a methodology when urban development and transport policy are considered.