• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.967-968
• /
• 2006

This research reports for the successful consolidation of $Al_2O_3$ powder with retained ultra-fine structure using MPC and sintering. Measurements in the consolidated $Al_2O_3$ bulk indicated that hardness, fracture toughenss, and breakdown voltage have been much improved relative to the conventional polycrystalline materials. Finally, optimization of the compaction parameters and sintering conditions will lead to the consolidation of $Al_2O_3$ nanopowder with higher density and even further enhanced mechanical properties.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.11-14
• /
• 1996

Super-inflation driven by dilaton/moduli kinetic energy is naturally realized in compactified string theory. Discussed are selected topics of recent development in string inflationary cosmology: kinematics of super-inflation, graceful exit triggered by quantum back-reaction, and classical and quantum power spectra of density and metric perturbations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.649-650
• /
• 2012

• Korean Journal of Plant Resources
• /
• v.34 no.4
• /
• pp.257-262
• /
• 2021

This study was conducted to investigate the yield loss of soybean by initial density of Heterodera glycines in soil. A soybean cultivar named 'Cheongja5ho' was cultivated as test material in Dangjin city, Chungcheongnam-do, Korea. Each seed was planted with distance of 25 cm in 35 plots by initial density of egg of the cyst nematode on June 21^st, and allowed to harvest on November 12^st in 2019. As a results, the yield of soybean decreased sharply when as the initial density of eggs of cyst nematode increased. The initial density of eggs in soil affected largely on the decreased yields of the soybean by more than 20% in above 2,000 eggs, and 30% in above 6,000 eggs of the cyst. Beyond the 6,000 eggs, the yield loss was more slowly decreased compared with the above cases. Eggs of H. glycines are widely distributed in Korea, resulting in the serious soybean yield loss by H. glycines.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.1
• /
• pp.92-97
• /
• 2019

The sea is stratified with water that has different densities because of pressure, temperature, and salinity. When conducting studies of internal waves in the ocean, the fluid is assumed to have layers that have discrete densities. This assumption is made because it is difficult to achieve layers that exhibit gradual changes in the density of the water. In this study, we used previous studies on ocean waves and their radiation issues in the density layer fluid to investigate the characteristics of internal waves in the ocean and their radiation patterns induced by a moving body in a stratified fluid. We also studied the difference in wave radiation between the density gradient layer and the discrete density layer. We found that the wave radiation patterns depended on the velocity of the moving body and the change in the density of the water. The crest apex shift phenomenon was observed in the density gradient in the layer of fluid.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.52-56
• /
• 2001

Experiments of 2 type on insulating compounds accomplished to change PVC using in URD(Underground) power cable jacketing. one was DB (Dielectric Breakdown) test on the pure base resins and the others were WVT(Water Vapor Transmission) test on the compounds which contained C/B(Carbon Black), anti-oxidant to base resin. a kind of specimens made by pressing to resin of pellet or lump form was HDPE(High Density Polyethylene), MDPE(Medium Density Polyehylene), LDPE(Low Density Polyethylene), LLDPE(Linear Low Density Polyethylene), PVC (Polyvinyl Chloride). As a results of AC DB and WVT test, we saw that strength of Insulation was HDPE > LLDPE ≒ MDPE > LDPE and WVT ratio was HDPE < LLDPE < MDPE < LLDPE ≒ LDPE${\ll}$PVC. WVT of PVC using for jacket showed characteristic 15 times more than MDPE or LLDPE. Therefore, to development of watertightness cable, our works present need of Changing in insulating materials

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3685-3688
• /
• 2013

Background: Clinicians determine degree of mammographic density based on tissue firmness on breast examination. The study aimed to compare breast density in mammography and clinical breast examination. Materials and Methods: Six-hundred sixty three women 40 years of age or older were studied. The breast exam density was graded from 1 to 4 by two expert surgeons and the mammographic parenchymal density by two expert radiologists. Then for practical reasons, grades 1 and 2 were considered as low-density and grades 3 and 4 as high-density. Results: High and low densities were detected in 84.5% and 15.5% of clinical breast examinations and 59.7% and 40.3% of mammographies, respectively. The statistical analysis showed a significant difference between the breast tissue densities in breast examination with those in mammography. Conclusions: A clinically dense breast does not necessarily imply a dense mammographic picture.

• International Journal of High-Rise Buildings
• /
• v.4 no.2
• /
• pp.117-125
• /
• 2015

A vertical city with multifunctional land use turns out to be the most viable solution for an urban condition characterized by increasing density due to population expansion, topographical limitation of buildable land, economic development and the pursuit for collective sustainable living, such as in Hong Kong. This paper presents initial research results from a study on the chronological and typological evolution of tall buildings in the city, from the climate-responsive verandah typology to the mixed-use hyper-commercial podium and residential tower typologies that predominate today, to the ultimate formation of a vertical city. Case studies and surveys have focused on the development of this building typology throughout the decades since the 1920s, substantiating a discussion on the subjective and objective factors contributing to a genesis of the vertical city phenomenon in Hong Kong. The discussion will engage, under the notion of the vertical city, on how residents and visitors adapt to the growing density of the city, and how they accustom themselves to the changing urban morphology over time. Advantages such as high efficiency, spaces savings, time convenience, etc.; and disadvantages such as deficiency in livability, incompatibility of uses, environmental health deficiencies, etc.; serve as a reference for other cities in need of high-density planning due to population and economic growth.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1184-1188
• /
• 2005

The impacts of turbidity flow induced by summer rainfall events on water supply, aquatic ecosystems, and socioeconomics are significant and major concerns in most of reservoirs operations. As a decision support tool, the real-time turbidity flow monitoring and modeling system RTMMS is under development using a laterally integrated two-dimensional (2D) hydrodynamic and water quality model. The objectives of this paper is to present the preliminary field observation results on the characteristics of rainfall-induced turbidity flows and their density flow regimes, and the model performance in replicating the fate and transport of turbidity plume in a reservoir. The rainfall-induced turbidity flows caused significant drop of river water temperature by 5 to $10^{\circ}C$ and resulted in density differences of 1.2 to $2.6kg/m^3$ between inflow water and ambient reservoir water, which consequently led development of density flows such as plunge flow and interflow in the reservoir. The 2D model was set up for the reservoir. and applied to simulate the temperature stratification, density flow regimes, and temporal and spatial turbidity distributions during flood season of 2004 After intensive refinements on grid resolutions , the model showed efficient and satisfactory performance in simulating the observed reservoir thermal stratification and turbidity profiles that all are essentially required to enhance the performance of RTMMS.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.2
• /
• pp.16-19
• /
• 2018

The development speed of semiconductor and display device manufacturing technology is growing faster than the development speed of process equipment. So, there is a growing need for process diagnostic technology that can measure process conditions in real time and directly. In this study, a plasma diagnosis was carried out using impedance variation due to the plasma discharge. Variation of the measurement impedance appears as a voltage change at the reference impedance, and the plasma density is calculated using this. The above experiment was conducted by integrating the plasma diagnosis system and the linear atmospheric pressure DBD plasma source. It was confirmed that plasma density varies depending on various parameters (gas flow rate, $Ar/O_2$ mixture ratio, Input power).