• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.37-51
• /
• 1998

This study was carried out to lead the scientific management of the urban forest by estimating the forest environment. Forest environmental information was constructed using IDRISI system based on survey data, soil, plant, and digital elevation data. Forest environmental information was consisted of soil depth, soil organic content, soil hardness and parent rock as a soil environmental factor, and forest community, tree age, crown density as a plant environmental factor. Plant activity and topographic environment also were analyzed by using remote sensing data and digital elevation data. Environmental function of urban forest was estimated based on results of soil conservation and forest productivity. 70% of urban forest is located in elevation of lower than 200m and 55% of forest area have the slope of lower than 15 degree. Analyzed soil conservation status and forest productivity were almost the same as the soil chemical properties of collected soil sample and the vegetation index estimated using remote sensing data, respectively. Thus, the constructed forest environmental information could be useful to give some ideas for management of urban forest ecosystem and establishment of environmental conservation planning, including forests, in Taejon. The best forest environmental function was appeared at the natural ecology preservation zone. Current natural parks and urban parks were appeared to establish the environmental conservation plan for further development. The worst forest environmental function was appeared at the forest near to the industrial area and an overall and systematic plan was required for the soil management and high forest productivity because these forest was developing a severe soil acidification and having a low forest productivity.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.449-451
• /
• 2007

In the commercially managed timber lands, the information such as height, age, stand density, canopy closure and leaf area index need to be collected periodically. Stand volume is the most fundamental information in the valuation of timber, however, stand age information is the primary element of forest inventory and these two are highly correlated. Conventional method of collecting stand age information by field surveys such as ring count method is accurate; however, it is expensive, labor-intensive and time consuming. In the present study it was aimed to collect stand age information using modem techniques in a commercially managed timberland situated in Tennessee, USA. The Landsat Thematic Mapper (TM), Enhanced Thematic Mapper (ETM+) of three different periods, Shuttle Radar Topography Mission (SRTM), National elevation dataset (NED) and field inventory data were used. Normalized difference vegetation index (NDVI) and Tasselled Cap (TC) transformation techniques were applied on the TM and ETM+ data. The regression analysis was carried out to identify the correlation between stand age and NDVI, TC. In the present study about 2,469 datasets were analyzed. The $R^{2}$ value for stand age estimation was 0.713. The NDVI, TC2 and TC3 were found to produce accurate timber age information.

• Journal of Preventive Medicine and Public Health
• /
• v.33 no.1
• /
• pp.69-75
• /
• 2000

Objectives : This study was conducted to evaluate the risk factors associated with cardiovascular disease. Methods : By the questionnaire, the informations of education level, monthly income, alcohol consumption and smoking habit were obtained. Height, weight and blood Pressure(BP) were measured by a trained nurse. The level of lasting blood sugar(FBS), total cholesterol, hight-density lipoprotein(HDL) cholesterol and triglyceride were tested by enzyne method about a group of 2888 males and 1696 females ages ever 20 who had never taken the medication for hypertension. Statistical analysis, ANOVA, stepwise multiple regression, correlation analysis were peformed using SAS package program. Results : There were significant differences among age groups in systolic and diastolic blood pressure, body mass index(BMI), FBS, triglyceride and cholesterol except HDL-cholesterol. The risk factors associated with systolic and diastolic BP significantly in male were BMI, age, alcohol intake, but in female BMI, age. Smoking habit had a significant negative correlation with BP in both sex. In the group of mild hypertension ($\geq140\;mmHg\;or\geq90\;mmHg$ defined by JNC-VI) and hypertension ($\geq160\;mmHg\;or\;\geq95\;mmHg$ defined by WHO), the percent of diabetes $(FBS\geq140\;mg/dl)$, hypercholesterolemia $(\geq240mg/dl)$, and hypertriglyceridemia $(\geq200\;mg/dl)$ were significantly higher compared with normal group in male and female. BMI, and alcohol consumption had a positive correlation with FBS, total cholesterol and triglyceride. Smoking had a positive correlation with cholesterol and triglyceride but negative correlation with HDL-cholesterol in male. The educational attainment had a negative correlation with BMI, FBS, total cholesterol and triglyceride in female. Conclusions : This study suggested that drinking, smoking, and BMI and lower educational level were associated with hypertension, hyperlipidemia and diabetes, but further evaluation was needed by prospective intervention study.

• Korean Journal of Optics and Photonics
• /
• v.11 no.3
• /
• pp.147-151
• /
• 2000

We deposited the ion assisted ${Ta_2}{O_5}$ films and conventional thermal evaporated ${Ta_2}{O_5}$ films by using electron beam gun, and measured the optical properties and mechanical properties of the fabricated films according to the evaporation conditions. In the case of the TazOs films by oxygen ion assisted deposition with the anode voltage of 120 V, and current density of $50~500\muA/cm^2$, the refractive index exhibited 2.15 which was higher than the conventionally deposited film index 1.94 and the tensile stress exhibited $5.0\times10^8 dyne/cm^2$ which was lower than $7.0\times10^8 dyne/cm^2$. This properties coincided with the optical and mechanical properties of the films deposited at the elevated substrate temperature of $230^{\circ}C$. In the case of the argon ion assisted films the tensile stress was decreased but the absorption existed at the short wavelength in the visible spectral region. And all the fabricated films were found to be amorphous by the X-ray diffraction analysis. lysis.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.19-35
• /
• 2003

In order 새 investigate the spatial and seasonal variations of heavy metal pollution in heavily industrialized urban area, urban roadside sediments were collected for five years from gully pots in Seoul City. A series of studies have been carried out concerning the physicochemical characteristics of the sediments in order to evaluate the contamination of heavy metals such as Cd, Co, Cr, Cu, Ni, Pb and Zn. Roadside sediments and uncontaminated stream sediments were analyzed for total metal concentrations using acid extraction. The roadside sediments are characterized by very high concentrations of Zn (2,665.0$\pm$1,815.0 $\mu\textrm{g}$/g), Cu (445.6$\pm$708.0 $\mu\textrm{g}$/g), Pb (214.3$\pm$147.9 $\mu\textrm{g}$/g) and Cr (182.1$\pm$268.8 $\mu\textrm{g}$/g), indicating an artificial accumulation of these metals to the sediment chemistry. Comparing with average contents of uncontaminated stream sediments, roadside sediments were shown zinc 14 times (up to 64.4), copper 9 times (up to 181.7), lead 6 times (up to 63.7), cobalt 6 times (up to 168.7), nickel 4 times (up to 98.4), cadmium 2 times (up to 12.8) and chrome 2 times (up to 40.2) high content. The relative degree of heavy metal pollution for roadside sediments collected from each district in Seoul City is evaluated using the “geoaccumulation index”. As a result, heavy-metal contamination is highest centering the oldest residential district and industry area, and contamination level decreases as go to outer block of the city. The factor analysis results indicate that the levels of Cu, Ni, Fe and Cr are strongly related to numbers of factories, whereas the concentrations of Cr, Zn and Cd dependant on pollution index, indicating artificial contamination due to site-specific traffic density.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.1
• /
• pp.93-100
• /
• 2004

This study was carried out for analyzing pathological and epidemiological factors of osteoporosis and doing pilot test using trial compounds of tuna bone and oriental herbs based on the factors. Osteoporosis is originated from osteoblast, osteoclast, organic and inorganic factors etc. Therefore the pathology of osteoporosis is not simple because the cytokine, growth factors and hormones of the components are various a lot. Taking a view of epidemiological factors of type I osteoporosis, ageㆍmenarcheㆍcholesterolㆍBMI etc. have definite relation to them. So we can approach to aging or consumptive disease in oriental medicine, specifically differential diagnosis of blood depletion with deficiency of qi, deficiency of kidney, deficiency of yin, bony weakness etc. And it should be considered together with rules for maintaining good health or habit concomitantly. Therefore IL1ㆍ6 or TNF αㆍβ are generally used as molecular biological index for osteoblast and osteoclast because the most important index is bone mineral density and strength, but the factors like collagen and noncollagen protein must be accounted as biomarkers. Trial compounds generally showed favorable effects on accompanying subjective symptoms of osteoporosis in the pilot test for menopausal woman. But if she didn't have specific symptoms of osteoporosis there wasn't any specific change. And osteocalcin was increased in case of being under standard level, but wasn't changed in case of normal level. Therefore these trial compounds can be used as a funcdonal diet for type I osteoporotic patients or preventive measures.

• Water for future
• /
• v.19 no.2
• /
• pp.139-148
• /
• 1986

The hydrologic response function in a small basin is expressed by the distribution function of slope length. The characteristics of topographical factors is represented to the concentration time, and the instantaneous unit hydrograph is derived as a hydrologic rsponse function by application of probobility density function. The averaging process of runoff characteristics within watershed was analyzed for a few small watershed where was split up the small basin itself. The method of calculation of the effective rainfall should play important roles in the transformation process from hydrologic response function to runoff hydrograph. In this paper, the Horton's infiltration quation is used as a method of calculation of effective rainfall, a new response function of runoff process is derived. The $\Phi$-index method and the infiltration method are tested by comparing the observed and estimated values.

• Korean Journal of Food Science and Technology
• /
• v.21 no.6
• /
• pp.780-787
• /
• 1989

The texturization properties of extrudate from isolated soybean protein and rice flour by extrusion cooking were investigated. The addition of up to 30% rice flur to isolated soy proetin could give more tenderness to the texturized extrudate. As the rice flour content increased, die temperature, nitrogen solubility index, and integrity index were decreased slightly with lower chewiness and gumminess. The water content of final extrudate was increased as the addition of rice flour increased, while density was maintained without variation, and rehydration ratio was decreased. The distribution of pressure profile during extrusion were in the range of $15-100kg/cm^3$. As the addition of rice flour increased, scanning electron micrographs demonstrated the gelatinized surface structure of rice starch and the increased air cell size of the testurized extrudate.

• Fire Science and Engineering
• /
• v.24 no.3
• /
• pp.86-92
• /
• 2010

One of the limitation of wood as building materials is its flammability. The purpose of this paper is to examine the combustion properties of the Pinus rigida and Castanea savita which are grown in Korea and meet the desirable characteristics for use of construction materials. The cone calorimeter (ISO 5660-1) was used to determine the heat release rate (HRR) and fire smoke index, as well as CO and $CO_2$ production and smoke obscuration. The $HRR_{mean}$ of the Castanea savita and Pinus rigida at $50\;kW/m^2$ of radiant heat flux was $70.4\;kW/m^2$ and $68.5\;kW/m^2$. Furthermore, the THR of Castanea sativata was 120.8 MJ/kg and it was higher than the THR of Pinus rigida ($81.9\;MJ/m^$). These results are depend on the bulk density of tested wood species. The Castanea savita has high $CO_{mean}$ yield and high CO/$CO_2$ yield compared with that of Pinus rigida.

• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.470-475
• /
• 1988

The extrusion-cooking method was used to make gelatinized rice extrudate from rice grits of the Chuchung and the Samgang varieties. The water contents of raw rice grits varied from 15% to 25%, and the physicochemical properties of extrudates were evaluated. Low moisture content showed high expansion ratio in rice extrudate and resulted in some decrease in gelatinization, bulk density and break strength. Increasing the water content to 25% resulted in increase in water absoption index but decrease in water solubility index. With regards to Brabender Amylograph values and rheological patterns, higher moisture content in raw materials revealed stronger pseudoplastic flow behavior with lower viscogram property. Hunter's color values of rice flours extruded at low water content were low in b values. Scanning electron microscopy demonstrated the break-down of starch granules during extrusion.