• Phonetics and Speech Sciences
• /
• v.4 no.2
• /
• pp.3-20
• /
• 2012

The purpose of this study was to investigate whether a segmentation unit for a Korean noun is a 'syllable' and whether the process of segmenting spoken words occurs at the lexical level. A syllable monitoring task was administered which required participants to detect an auditorily presented target from visually presented words. In Experiment 1, syllable neighborhood density of high frequency words which can be segmented into both CV-CVC and CVC-VC were controlled. The syllable effect and the neighborhood density effect were significant, and the syllable effect emerged differently depending on the syllable neighborhood density. Similar results were obtained in Experiment 2 where low frequency words were used. The significance of word frequency effect on syllable effect was also examined. The results of Experiments 1 and 2 indicated that the segmentation unit for a Korean noun is indeed a 'syllable', and this process can occur at the lexical level.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.759-765
• /
• 2011

This paper proposes an effective assistant model for considering the stator slot-opening effect on air gap flux density distribution in conventional interior-type permanent magnet (IPM) motor. Different from the conventional slot-opening effect analysis in surface-type PM (SPM) motor, a composite effect of slot-opening uniquely existing in IPM motor, which additionally causes enhancement of air gap flux density due to magnet flux path distortion in iron core between the buried PM and rotor surface. This phenomenon is represented by a proposed assistant model, which simply deals with this additional effect by modifying magnetic pole-arc using an effective method. The validity of this proposed analytical model is applied to predict the air gap flux density distribution in an IPM motor model and confirmed by finite element method (FEM).

• The Journal of Korean Obstetrics and Gynecology
• /
• v.19 no.2
• /
• pp.107-126
• /
• 2006

Purpose : This study was peformed to evaluate the effect of Kamijoaguiem(JGE) on the bone mass and its related factors. Methods : We used ovariectomized rat as an estrogen-deficient animal model. The model rats of osteoporosis showed a significant decrease in bone density, bone ash density, calcium content of femur bone. At the 7th day after operating ovariectomy, rats were administered with JGE per orally, and continued for 10 weeks. And osteoporosis related parameters were determined to investigate the effect of JGE. Results : Bone density, bone ash density, bone calcium, magnesium and phosphorus was decreased in osteoporotic rats. JGE improved the decreased bone density, bone ash density and the decreased bone magnesium, but JGE didn't improve the decreased bone calcium and phosphorus in osteoporotic rats. Osteocalcin in serum and hydroxy-proline excretion in urine were increased in osteoporotic rats. Their levels were decreased when JGE was administered. ALP activity in serum was increased in osteoporotic rats. JGE didn't induce any significant changes. JGE showed significant increase in serum calcium level, total protein level, albumin level, BUN level, serum LDH activity. JGE didn't show significant increase in serum T-cholesterol density, triglyceride density, HDL-cholesterol density. JGE didn't show significant increase in RBC number, hemoglobin level, platelet number, hematocrit level. JGE showed inhibitory effect on the degradation of bone-matrix in osteoporotic rats, in histological examination to Hematoxylin-eosin stain. Conclusion : JGE might improve bone density due to inhibition of bone resolution in osteoporotic rats. It suggest that JGE may be useful prescription in osteoporosis.

• Health Policy and Management
• /
• v.25 no.1
• /
• pp.53-62
• /
• 2015

Background: Supplier induced demand (SID) indicates the case when doctors increase the demand of the patients, following their (physicians') own best interests rather than patients'. This may occur when asymmetry of information exists between suppliers and consumers. This study aims to confirm whether SID exists in the Korean setting, particularly by dividing SID into both 'induced demand effect' and 'availability effect.' Methods: Induced demand effect and availability effect are differentiated following Carlsen & Grytten's theoretical frame which divides doctor density regions into high and low ones. Results: Positive correlation between doctors' density and utilization of their services was found, which could be interpreted as 'availability effect.' Conclusion: The result suggests that additional medical use for additional doctor, particularly in the area of low doctor density, can be interpreted to occur to meet the basic medical need of the people rather than as a result of unnecessary induced demand. It is important to make more medical doctors provided and to distribute them appropriately across the region in such a country like Korea where doctor's density is relatively low.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.5
• /
• pp.73-85
• /
• 1999

Yield and fracture are separated in the tensile failure of paper. Failure in the machine direction of photocopy paper is contrasted with failure in the cross-machine direction . The ratios of distortion (shape change) to dilatation (volume change) for individual elements at yield and fracture are described. The ratios of distortion to dilatation are measured and compared to predicted values of the strain energy density theory. To evaluate the effect of the angle from the principal material direction on the strain energy density theory. To evaluate the effect of the angle from the principal material direction on the strain energy density factor, samples are prepared from machine direction to cross-machine direction in 15 degree intervals. the strain energy density of individual elements are obtained by the integration of stress from finite element analysis with elastic plus plastic strain energy density theory. Poison's ratio and the angle from the principal material direction have a great effect ion the ratio fo distortion to dilatation in paper. During the yield condition, distortion prevails over dilatation . At fracture, dilatation is at a maximum.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3B
• /
• pp.353-360
• /
• 1999

The global balance model is applied to investigate the transient behavior of the electron density and temperature in helicon plasmas. The power absorption calculated from the solutions of the Maxwell equations is used in solving the power balance equation. A balance model for the neutral gas is also considered to fins its density self-consistently. It is turned out that the numerical results reasonably explain consequences of the ion pumping effect including the occurrence of two distinct modes of pulsed helicon discharge which have been observed experimentally. The behavior of the discharge parameters are fond to be primarily dependent on the power absorption and the gas flow rate, but the pressure controls the electron density and temperature of the final steady state as well as the transient state even with the same flow rate. Finally, it is shown that the electron density virtually the linear relationship between the density and the magnetic field is retained for a higher pressure when the effect of the ion pumping is negligible.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1398-1401
• /
• 2003

Recently, The PolyPropylene(PP) Foam used as Bumper and Helmet is well known as a protective material for products. In this paper, the effect of the density of PP foams on the absorption of the impact energy is implemented. The result of the experiment has revealed that the effect of the high-density PP foams is remarkably increased compared with that of the low-density PP foams. And it also shows that the absorption of the impact energy of PP foams are greatly influenced by the density in impact velocity(220cm/s). These results are expected to be utilized for the technique of manufacturing a optimum impact structure.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.3
• /
• pp.234-242
• /
• 2024

In this study, the effect of carbonization temperature and mixing ratio of ceramics manufactured from sawdust, chaff and charcoal on sound absorption performance and density profile was investigated. The density profile of ceramics prepared by the addition rates of sawdust, chaff and charcoal showed the highest value at 91.00% when the ratio of sawdust, chaff and charcoal was 50:25:15. However, the difference in density profile according to the addition rate was insignificant. The density profile of ceramics manufactured according to the carbonization temperature showed the highest value of 88.06% when manufactured at 800℃. However, it does not show any particular trend, so it is understood that the effect of the carbonization temperature on the density gradient is small. On the other hand, the sound absorption coefficients of ceramics prepared by the addition rates of sawdust, chaff and charcoal is between 0.3 and 0.4 at almost all frequencies when the addition rates of sawdust, chaff and charcoal are 50:30:10 and 50:35:5, respectively. Therefore, as the chaff particles increased, the sound absorption performance was improved. In addition, the sound absorption coefficients of the ceramics manufactured at each carbonization temperature showed the highest value in the ceramics manufactured at 1,200℃.

• Advances in concrete construction
• /
• v.2 no.3
• /
• pp.209-227
• /
• 2014

The use of limestone fines (LF) in mortar and concrete can in certain ways improve performance and thus has become more and more commonplace. However, although LF is generally regarded as a filler, it is up to now not clear how much filling effect it could have and how best the filling effect could be utilized. Herein, the packing density and filling effect of LF were studied by measuring the packing densities of LF, (LF + cement) blends and (LF + cement + fine aggregate) blends under dry and wet conditions, and measuring the performance of mortars made with various amounts of LF added. It was found that the addition of LF would not significantly increase the packing density of (LF + cement) blends but would fill into the paste to increase the paste volume and paste film thickness, and improve the flow spread and strength of mortar.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.5
• /
• pp.648-656
• /
• 2019

Objective: An experiment was conducted to determine the effect of reduced energy density of close-up diets on metabolites, lipolysis and gluconeogenesis in cows during the transition period. Methods: Thirty-nine Holstein dry cows were blocked and assigned randomly to three groups, fed a high energy density diet (HD, 1.62 Mcal of net energy for lactation $[NE_L]/kg$ dry matter [DM]), a medium energy density diet (MD, $1.47Mcal\;NE_L/kg\;DM$), or a low energy density diet (LD, $1.30Mcal\;NE_L/kg\;DM$) prepartum; they were fed the same lactation diet to 28 days in milk (DIM). All the cows were housed in a free-stall barn and fed ad libitum. Results: The reduced energy density diets decreased the blood insulin concentration and increased nonesterified fatty acids (NEFA) concentration in the prepartum period (p<0.05). They also increased the concentrations of glucose, insulin and glucagon, and decreased the concentrations of NEFA and ${\beta}-hydroxybutyrate$ during the first 2 weeks of lactation (p<0.05). The plasma urea nitrogen concentration of both prepartum and postpartum was not affected by dietary energy density (p>0.05). The dietary energy density had no effect on mRNA abundance of insulin receptors, leptin and peroxisome proliferator-activated $receptor-{\gamma}$ in adipose tissue, and phosphoenolpyruvate carboxykinase, carnitine palmitoyltransferase-1 and peroxisome proliferator-activated $receptor-{\alpha}$ in liver during the transition period (p>0.05). The HD cows had higher mRNA abundance of hormone-sensitive lipase at 3 DIM compared with the MD cows and LD cows (p = 0.001). The mRNA abundance of hepatic pyruvate carboxy-kinase at 3 DIM tended to be increased by the reduced energy density of the close-up diets (p = 0.08). Conclusion: The reduced energy density diet prepartum was effective in controlling adipose tissue mobilization and improving the capacity of hepatic gluconeogenesis postpartum.