• Journal of the Korean Wood Science and Technology
• /
• v.42 no.5
• /
• pp.555-562
• /
• 2014

Characteristics of carbonized fiberboard such as chemical materials absorption, electromagnetic shielding, and electrical and mechanical performance were determined in previous studies. The carbonized board therefore confirmed that having excellent abilities of these characteristics. In this study, the effect of density on physical properties and sound absorption properties of carbonized fiberboards at $800^{\circ}C$ were investigated for the potential use of carbonized fiberboards as a replacement of conventional sound absorbing material. The thickness of fiberboards after carbonization was reduced 49.9%, 40.7%, and 43.3% in low density fiberboard (LDF), medium density fiberboard (MDF), and high density fiberboard (HDF), respectively. Based on SEM images, porosity of carbonized fiberboard increased by carbonization due to removing adhesives. Moreover, carbonization did not destroy structure of wood fiber based on SEM results. Carbonization process influenced contraction of fiberboard. The sound absorption coefficient of carbonized low density fiberboard (c-LDF) was higher than those of carbonized medium density fiberboard (c-MDF) and carbonized high density fiberboard (c-HDF). This result was similar with original fiberboards, which indicated sound absorbing ability was not significantly changed by carbonization compared to that of original fiberboards. Therefore, the sound absorbing coefficient may depend on source, texture, and density of fiberboard rather than carbonization.

• Journal of the Korea Furniture Society
• /
• v.21 no.6
• /
• pp.449-458
• /
• 2010

This study attempted to investigate the effect of panel thickness on the horizontal density distribution (HDD) of medium density fiberboard (MDF) in a destructive way. Full size MDF panels with five different thicknesses such as 2 mm, 4.5 mm, 9 mm, 18 mm and 30 mm were cut into two different specimen sizes, i.e., $500{\times}500\;mm$ and $120{\times}120\;mm$ to measure the HDD. In general, the overall density of MDF panel diminished as the thickness increased, showing the highest density for the thinnest MDF panels. The HDD variation was significant for the samples of smaller specimen size ($120{\times}120\;mm$). MDF panel thickness significantly influenced to the HDD, which increased as the thickness decreased. In addition, the thinner panels showed much wider range in the HDD than those of thicker panels. The coefficient of variation (COV) of HDD also followed a similar trend to the panel density as the thickness increased. In summary, MDF panel thickness had a significant impact on the HDD within a panel. The sample size also showed a considerable effect to the HDD of MDF panels.

• Korean Journal of Plant Resources
• /
• v.28 no.4
• /
• pp.541-545
• /
• 2015

This study investigated the effect of planting density on growth and yield of elephant garlic. Three planting densities of 20 × 20, 20 × 15, and 20 × 10 ㎝ were tested with the furrow width fixed at 120 ㎝ for the evaluation of elephant galic growth and yield. The average date of emergence was middle and late November, requiring about 30 days for the all emergence. For the flowering, 221 days after sowing were required in all the treatments. Plant height and leaf growth were not significantly different according to the planting density. Flower stalk was shorter when planting density was narrow. The L/D ratio was decreased to form oval shape when planting density was narrow. The yield of elephant garlic was 1,811 ㎏ /10a in planting density 20 × 20 ㎝, 2,375 ㎏/10a in 20 × 15 ㎝, and 2,838 ㎏/10a in 20 × 10 ㎝ plot. The marketable garlic ratio was highest as 1,593 ㎏/10a in planting density of 20 × 15 ㎝.

• Water for future
• /
• v.26 no.4
• /
• pp.97-105
• /
• 1993

This paper presents the results of a study conducted to improve the understanding of the characteristics of cylindrical capsule flow in a pipeline by taking into account of the effect of capsule density uniformity. The effect of capsule density variation in the axial direction was studied both experimentally and anaytically. The experiments were conducted in a 190mm diameter straight pipe 17m long. The velocity, gap and tilt of capsules were measured under various conditions, In order to interpret the data on various capsule density conditions, the stability index given in the dimensionless number was introduced. The motion of capsules in pipelines is strongly affected by the stability of the capsules characterized by the stability index. The experiments conducted prover that the stability index is a valid criterion for explaining and correlating data on the capsule motion and the capsule density uniformity.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.73-82
• /
• 2005

We constructed a series of calibration models in the campus of Kangwon National University. A series of experiment for calibrating sonde response as well as casing effect in field measurement. Here we explained the process of construction of calibrating facility which consists of three model holes of different density and three model holes of different diameter. It was discussed the calibration equations obtained from its sonde response calibration test. A density correction chart for different separation of detector from hole wall was suggested, and verified the possibility of determining true density from measurements in cased hole.

• Journal of Nutrition and Health
• /
• v.29 no.6
• /
• pp.590-593
• /
• 1996

This study was done to evaluate the effect of dietary calcium level (a diet which met 100% or twice the calcium level in AIN-76 diet) on preventing bone loss in ovariectomized rats. Forty Sprauge-Dawley female rats(body weight 200$\pm$5g)were divided into two groups. One group were ovariecotomized (Ovx) while the others received sham operation(Sham). Thereafter, each rat group was further divided into normal calcium diet(0.52%) and high calcium diet(1.04%) subgroups. All rats were fed on experimental diet and deionized water ad libitum for 8 weeks. The total body, spine and femur bone mineral densities and bone mineral contents were measured by Dual Energy X-ray Absorptiometry, Eight weeks following operation, ovariectomized rats fed a high calcium diet had a significantly higher total bone mineral content, total bone calcium content, spine bone mineral density, spine bone mineral content and femur bone mineral content than ovariectomized rats fed control calcium diet. The correlation between dietary calcium intake level and spine bone mineral density were positive, but there was no correlation between dietary calcium intake and femur bone mineral density. The findings from the present study demonstrated that bone loss due to ovarian hormonal deficiency can be partially prevented by a high calcium diet. Futhermore, these findings support the strategy of the use of a high calcium diet in the prevention of estrogen depleted bone loss(postmenopausal osteoporosis)

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.840-847
• /
• 2001

The crystallization characteristics of metallocene linear low density polyethylene (m-LLDPE)/linear low density polyethylene (LLDPE) blends were investigated. The effect of blending on the induction time for crystallization, spherulites growth rate, and maximum size of spherulites was mainly considered in this study. The formation of separate crystal which is well known crystallization behavior in LLDPE/LDPE blend was not found in m-LLDPE/LLDPE blends. The blending m-LLDPE to LLDPE caused the dramatic decrease in the induction time of m-LLDPE/LLDPE blends but it seems that the blend composition shows less effect on the induction time. Lower branching number in m-LLDPE resulted in the increasing of spherulites growth rate and the maximum size of spherulites is depend upon both the induction time and spherulites growth rate of LLDPE component affected by m-LLDPE.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1993.07a
• /
• pp.483-490
• /
• 1993

This paper presents the results of a study conducted to improve the understanding of the characteristics of cylindrical capsule flow in a pipeline by taking into account of the effect of capsule density uniformity. The effect of capsule density variation in the axial direction was studied both experimentally and analytically. The experiments were xonducted in a 190mm diameter straight pipe 18m long. The velocity, tilt of capsules and the gap between the capsule bottom and the pipe bottom were measured under various conditions. In order to interpret the data on the various capsule density conditions, the stability index given in the dimensionless numberwas introduced. The motion of capsules in pipelines is strongly affected by the stability of the capsules characterized by the stability index. The experiments conducted proved that the stability index is a valid criterion for explaining and correlating data on the capsule motion and the capsule density uniformity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.3
• /
• pp.338-350
• /
• 1996

A numerical analysis is carried out to study the two-dimensional steady state natural convection from vertical wires immersed in cold pure water. The surface of the wire is $0^{\circ}C$ unifrom temperature. Results of the analysis are presented for free stream temperature from $0^{\circ}C$ to $25^{\circ}C$ and the aspect ratio N from $5.26{\times}10^{-3}$ to $1.0{\times}10^{-3}$. The effects of the density extremum and aspect ratio on the flow pattern and the heat transfer characteristics are discussed As the aspect ratio N becomes larger, in the range of $1.0^{\circ}C{\leq}T_{\infty}{\leq}4.4^{\circ}C$ and $6{^{\circ}C}{\leq}T_{\infty}{\leq}17^{\circ}C$, the effect of Pr number on the heat transfer is shown to be more significant than the aspect ratio. Investigating into the effect of the density extremum on the heat transfer from wires, the new heat transfer correlations are suggested with the relation of average Nu mumber vs. modified Ra number. Here, the coefficient values C of correlations are presented as the function of density extremum parameter $R^*$. The effects of the density extremum parameter are also discussed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.3
• /
• pp.121-125
• /
• 2016

The effect of temperature and pressure in the nitrogen ambient furnace on bulk micro defect (BMD) and denuded zone (Dz) is experimentally investigated. It is found that as pressure increases, Dz depth increases with a small decrease of BMD density in the range of temperature, $100{\sim}300^{\circ}C$. BMD density with hot isostatic pressure treatment (HIP) at temperature of $850^{\circ}C$ is higher than that without HIP while Dz depth is lower due to much higher BMD density. As the pressure increases, BMD density is increased and saturated to a critical value, and Dz depth increases even if BMD density is saturated. The concentration of nitrogen increases near the surface with increasing pressure, and the peak of the concentration moves closer to the surface. The nitrogen is gathered near the surface, and does not become in-diffusion to the bulk of the wafer. The silicon nitride layer near the surface prevents to inject the additional nitrogen into the bulk of the wafer across the layer. The nitrogen does not affect the formation of BMD. On the other hand, the oxygen is moved into the bulk of the wafer by increasing pressure. Dz depth from the surface is extended into the bulk because the nuclei of BMD move into the bulk of the wafer.