• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.5-8
• /
• 2001

SSB(Single Sideband) modulation scheme is high bandwidth efficient method in the mobile communication system compared with present DSB(Double Sideband) modulation scheme. Using the othogonality between inphase PN code and Hilbert transformed quadrature PN code, we propose phase estimation structure that enables coherent demodulation in the reverse link basestation receiver Several system characteristics, bit error rate and phase error variance, are simulated and compared with balanced QPSK DS/CDMA system. To verify system performance, SSB/BPSK-DS/CDMA test board is implemented using FPGA chips.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.360-364
• /
• 1994

This paper is concerned with extracting the diagnostic signature for motor-operated valves (MOV's) noninvasively. A torque estimator is developed and tested to obtain electical torque of the induction motors which are attached to the MOV's. Inverse filter is used to recover the gear meshing forces from the measured actuator housing vibration, which contain the gear rotation information. Frequency demodulation techniques are performed and an adaptive linear bandpass filter is implemented to improve signal-to-noise ratio. Finally, stand-alone valve experiments are carried out to validate the signature extraction scheme.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2597-2599
• /
• 2001

This paper has developed the power line interphone system with the amplitude modulation technique. We described the Amplitude modulation and demodulation circuit and the line coupler for the implementation of the power line interphone. and suggested the experimental result for the signal attenuation, demodulated signal, spectrum.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.320.1-320
• /
• 2002

In a hard disk drive (HDD) control system, a state-space controller/observer design is popularly adopted fur its advantages such as effective filtering of position and velocity, use of estimation error to handle servo defects, etc. In this report, a systematic method is proposed to accommodate the transport delay in the plant dynamics into the state estimator. (omitted)

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.109-116
• /
• 2004

The signal in wireless multi-path channel is affected by fading and ISI because of high data rate transmission, so the signal has the high error rate. The present modulation and demodulation method of DSRC system can not expect sufficient for providing data service over 1 Mbps, so the channel equalization and advanced modulation and demodulation methods are required. OFDM method is generally Inon as an effective technique for high data rate transmission system, since it can prevent ISI by inserting a guard interval. However, a guard interval longer than channel delay spread has to be used in each OFDM symbol period, thus resulting a considerable loss in the efficiency of channel utilization. Therefore the equalizer is necessary to cancel ISI to accommodate advanced ISI service with higher bit rate and longer channel delay spread condition. In this thesis, the channel equalizer for the OFDM-DSRC system was designed and its performance in a multi-path fading environment was evaluated with computer simulation. As a result, the performance of Pseudo LMMSE equalizer for the OFDM-DSRC has been improved comparing with LS equalizer at higher bit rate transmission system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.2 s.10
• /
• pp.19-28
• /
• 2006

In the IEEE 802.15.4a system, they require simple, economical and low power consumption transmitter and receiver to transmit low rate data and to identify distance and location. To meet these requirements, LR-WPAN system use transmitter and receiver with simple modulation and demodulation scheme. In this paper, use PPM+BPSK modulation and windowing scheme to overcome multipath fading effect. Then we apply this channel estimation scheme to LR-WPAN system and compare performance depends on transmitter scheme. Proposed method using preamble to find channel characteristic out and we compensate distorted data with that information. Therefore we can detect signal easily at the demodulation part. Simulation result shows that performance evaluation is greater at the NLOS channel than LOS channel no matter what the receiver scheme.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.38-46
• /
• 2020

LOw Frequency Analysis Recording (LOFAR) and Demodulation of Envelop Modulation On Noise (DEMON) grams are bearing-time-frequency plots of underwater acoustic signals, to visualize features for passive sonar. Those grams are characterized by tonal components, for which conventional data coding methods are not suitable. In this work, a novel LOFAR/DEMON gram compression algorithm based on binary map and prediction methods is proposed. We first generate a binary map, from which prediction for each frequency bin is determined, and then divide a frame into several macro blocks. For each macro block, we apply intra and inter prediction modes and compute residuals. Then, we perform the prediction of available bins in the binary map and quantize residuals for entropy coding. By transmitting the binary map and prediction modes, the decoder can reconstructs grams using the same process. Simulation results show that the proposed algorithm provides significantly better compression performance on LOFAR and DEMON grams than conventional data coding methods.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.51-59
• /
• 2006

In this paper, we propose an excellent ultrasonic transceiver system based on a QPSK modulation technique for underwater communication. The transmitter sends a still image at the level of 187dB re $1{\mu}Pa/V@1m$ through a power amplifier by driving an ultrasonic sensor. The receiver performs digital conversion at the 100kHz sampling frequency, demodulation and decoding process for the image sent from the transmitter through the underwater communication. We have shown that the processed image at the receiver is almost the same as the orignal one. The maximum detection distance of the system proposed in this paper is approximately 1.17km. To cope with the difficulties of transmission loss, this paper proposes, implements and analyzes important parameters of sensors and circuits used in the system. Most of the underwater communication has focused on the transmission of audio signal, but this paper suggests an efficient underwater communication system for still image transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10C
• /
• pp.597-604
• /
• 2011

In this paper, we propose group Manchester code (GM) modulation scheme for medical in-body wireless body area network (WBAN) systems. In IEEE, the WBAN system is assigned as 802.15. Task Group 6 (TG 6), and the related standardization is being progressed, Recently, in this Group, group pulse position modulation (GPPM), which can obtain data rate increase by grouping pulse position modulation (PPM) symbols, is proposed as a new modulation scheme for low-power operation of WBAN system. However, the conventional method suffers from BER performance degradation due to the absence of gray coding and its demodulation characteristics. Therefore, in this paper, we propose a modified GM scheme which groups Manchester code instead of PPM. In the proposed GM scheme, a low-complexity maximum likelihood (ML) demodulation method is employed in order to maximize the BER performances, Also, log likelihood ratio (LLR) decision method is proposed to employ the Turbo code as forward error correction (FEC), Finally, we verified that the proposed method has a good performance and is an appropriate scheme for in-body WBAN system through extensive performance evaluation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.1045-1050
• /
• 2008

In this paper presents a CMOS RF receiver for IR-UWB wireless communications is presented. The impulse radio based UWB receiver adopts the non-coherent demodulation that simplifies the receiver architecture and reduces power consumption. The IR-UWB receiver consists of LNA, envelop detector, VGA, and comparator and the receiver including envelope detector, VGA, and comparator is fabricated on a single chip using $0.18{\mu}m$ CMOS technology. The measured sensitivity of IR-UWB receiver is down to -70 dBm and the BER $10^{-3}$, respectively at data rate 1 Mbps. The current consumption of IR-UWB receiver except external LNA is 5 mA at 1.8 V.