• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.22-29
• /
• 2012

Robot related injuries in industrial accidents statistics during 2008~2010 have accounted for a total of 109 cases equivalent to 30~40 cases for each of those years. The number of injured compared to the dissemination of industrial robots(51,302 units/2004) can be regarded as quite low. However, the fatal injuries sustained by 7 (6.4%) out of 109 cases paints the stark reality of robot-related accident fatalities. It is a sad probability that as the automation process expands its use of industrial robots which have increased significantly in demand, the incidence of workplace accidents will also increase. Therefore, the incidence of accidents throughout the period of 2008~2010 has been analysed to prevent the injuries due to the increased use of industrial robots. In the analysis, the injuries occurred during the industrial robot operation accounted for 45.9% of the entire accidents. Thus, we examined the present status of the industrial robot operation to analyze the root cause of accidents occurred in our studied time period. We looked at a total of 469 workplaces. 456 workplaces responded in the year 2009 and survey studies were implemented at 13 of the 29 workplaces where work injuries were sustained in the year 2010. Even where protective measures and interlock devices were in place, our studies indicated that workers could access the robot area to perform the tasks in 188 sites(40.1%). Also, the 143 sites(30.5%) had control measures and equipment located in the safety fence. In addition, the robots found at 164 sites(35.0%) could be restarted without additional restarting operation. These three causes accounted for most of the workplace injuries during the industrial robot operations. Futhermore, we confirmed the fact that the protective measures of the current safety regulations were not strictly enforced. Based upon our studies and the investigation of the present status of the industrial robot operation, higher standards in training and supervision of workers in the robot operation must quickly be met in order to prevent these industrial injuries.

• Health Policy and Management
• /
• v.9 no.1
• /
• pp.30-71
• /
• 1999

There has been a dramatic increase in public awareness regarding dementia during recent years. However, dementia remains a family affair and patients do not receive adequate care in Korea. This study aims to assist patients and their caregivers by establishing Home and Community based Long-Term Care in a city. The data collected for analysis include five main categories: dementia prevalence, limitations of daily activities of patients, burden of caregivers, the services that patient's family want to utilize, the resources that handle dementia in the community. Major findings can be summarized as follows: 1)The prevalence rate of dementia for elderly people is 13.1 per 100 persons. Alzheimer's disease amount to 38.9% of dementia patients and vascular dementia account for 36.7% of them 2)Eight out of ten patients have mild dementia. Almost all patients have normal ADL. IADL, however, shows different picture. In every items of IADL, about 60% of patients reveals some limitations. 3)The proportion of patients who had medical diagnosis is as low as 20%. Families of patients think dementia as normal aging process and medical doctors in the community do not give special concern to dementia patients. 4)Caregivers does not have proper social support. They suffer from long care time, experience large obstacles in respect of health, daily living, and social activity. 5)Health center and Community welfare center have launched some programs-consultation, home-visiting nursing, day care center, voluntary force mobilization and so on-for dementia patients. But they do not perform expected roles and functions because of lack of skilled personnels and inadequate coordination of relevant organizations for dementia care. 6)Families of dementia patients prefer home helper and home-visiting nurse to hospitalization. For the future, however, demand for institution-based long-term services will increase. We develope community dementia care model based on above findings as follows: 1)Health center execute community cardiovascular control program for the prevention of vascular dementia. 2)Refer to epidemiologic characteristics of patients and preference of family, the most urgent task for dementia care in this city is to expand and organize Home and Community based Long-Term Care. 3)For the continuous and comprehensive care, care plan for a patient must be prepared. Case management team should be builded to prepare this plan and coordinate relevant resources. 4)Special long-term care unit for dementia will be needed in a near future. This unit should have multiple functions, such as day-care center, short stay facility, training center for relevant personnels, besides long-term nursing home considering effective care of dementia and efficient operation of the facility. 5)Voluntary workers deserve their due efforts. Incentive mechanisms must be developed to activate voluntary activities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.517-524
• /
• 2020

In line with the recent wave of the 4th Industrial Revolution, the environment for defense R&D is transforming into a center of high-tech military technology. In particular, developed countries are strengthening control of technology exports and technology transfer to protect advanced defense science and technology. For this reason, the budget demand for securing the ability to develop independently high-tech weapons and core technologies suitable for the future battlefield environment is increasing, and increasing efficiency in R&D investment has been highlighted for efficient distribution of limited budgets. This study examined the efficiency of the defense basic R&D project using the non-parametric approach, DEA. The R&D budget, R&D researcher, and R&D period were selected as the input variables, and the number of papers and patents were used as output variables. The efficiency of basic R&D projects was analyzed through CCR, BCC models, and SE. Lastly, based on the efficiency measurements, the cause of the inefficiency of R&D projects was suggested, and ways to improve efficiency were suggested. This study is expected to be used as useful information that can be applied to project performance management through efficiency analysis of basic defense R&D projects and be reflected in the project planning stage through feedback.

• Journal of Animal Science and Technology
• /
• v.57 no.3
• /
• pp.8.1-8.8
• /
• 2015

Background: The demand for healthy, lean and consistent meat products containing low saturated fatty acid content and high quality polyunsaturated fatty acids (PUFA), especially long-chain (${\geq}C_{20}$) omega-3 PUFA, has increased in recent times. Fat deposition is altered by both the genetic background and dietary supplements, and this study aimed to assess the effect of dietary Spirulina supplementation levels on the mRNA expression patterns of genes controlling lipid metabolism in the subcutaneous adipose tissue (SAT) and Longissimus dorsi (ld) muscle of Australian crossbred sheep. Methods: Twenty-four weaned lambs belonging to four breeds under the same management conditions were maintained on ryegrass pasture and fed three levels of Spirulina supplement (control, low and high). In terms of nutrient composition, Spirulina is a nutrient-rich supplement that contains all essential amino acids, vitamins and minerals. It also is a rich source of carotenoids and fatty acids, especially gamma-linolenic acid (GLA) that infer health benefits. After slaughter, subcutaneous adipose tissue (SAT) and ld samples were subjected to mRNA extraction and reverse transcription using quantitative polymerase chain reaction (RT-qPCR) to assess the mRNA expression levels of the Aralkylamine N-acetyltransferase (AANAT), Adrenergic beta-3 receptor (ADRB3), B-cell translocation gene 2 (BTG2) and Fatty acid synthase (FASN) genes, which are associated with lipid metabolism. Results: Both low and high Spirulina supplementation levels strongly up-regulated the transcription of all the selected genes in both SAT and ld tissues (mostly in the subcutaneous adipose), but sheep breed and sex did not influence the gene expression patterns in these tissues. Conclusions: The evidence indicates that high Spirulina supplementation level resulted in a decrease in intramuscular fat content in Australian purebred and crossbred sheep due to the enhanced production of melatonin in sheep muscle tissues and strong up-regulation of mRNA expression of BTG2 in SAT which negatively affected fat deposition. In contrast, low Spirulina supplementation level strongly up-regulated the ADRB3 and FASN genes responsible for fat production. These findings are consistent with the observed phenotypic data suggesting that low Spirulina supplementation level can increase lamb production, with higher long-chain PUFA content.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.138-144
• /
• 2017

With the increase in power consumption due to the surge in the demand for power, it is necessary to improve the quality or design of the power (supply) for the purpose of reducing the energy consumption and so reduce the power loss. The switchboard is a mechanical device that receives electricity from the electricity generation facilities of KEPCO and divides it into the facilities required for each building. Switchboards generally consist of enclosures, switches, power conductors, and control components. This study deals with energized power conductors, which constitute the main element in the switchboard. Through the measurement of the effective ac resistance, it was confirmed that the vertical array structure of the conventional type plate conductor is inefficient. If the effective AC resistance increases significantly, the sectional area of the conductor becomes relatively large due to the skin effect. In this study, we studied the energy and material savings that could be obtained using the asterisk (*) array structure, which minimizes the effective ac resistance by reducing the skin effect. The core technology principle of this study is the energy saving switchgear based on conductor resistance reduction technology utilizing the asterisk array structure. The present invention involves a plate-shaped conductor arrangement structure capable of canceling out the magnetic field generated on each of the plate conductors (rst or abc) of the AC power supply in the power distribution panel by mutual action. The effect of this structure is to reduce the amount of inductive reactance due to the increase in the cross-sectional area and reduction of the effective AC resistance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.413-419
• /
• 2011

Diagnosis X-ray equipment localized at 1950's but it is developed suddenly at 1960's with demand together. Manufacture of Diagnostic X-ray equipment is controled by the KS regulation and the Ministry of Health and Welfare because of hazardous element etc. exposure by radiation. Most of diagnostic X-ray equipment ware single phase and three phase full-wave rectification but from 1980's it transforms it was exchanged in inverter type X-ray equipment. Inverter type X-ray equipment produces approximately 50~80% more average photon intensity then single phase full-wave rectification and the accuracy is high. But from a clinic it dose not use because expensive therefor the efficiency improvement of single phase full-wave rectification is necessary. We produced single phase full-wave rectification X-ray equipment control unit, high tension transformer, filament heating transformer, rectification circuit, high tension cable and others and evaluated efficiency, in result which is excellent compare with Rule of Safety Management and KS regulation.

• The Korean Journal of Malacology
• /
• v.27 no.4
• /
• pp.291-297
• /
• 2011

In an attempt to improve the substrate condition for Manila clam (Ruditapes philippinarum) culture, crushed oyster (Crassostrea gigas) shells were spread on the muddy tidal flat of Namseong-ri, Podu-myeon, Goheung-gun, Jeollannam-do in April 2008. To test the suitability of the crushed oyster shell added substrate, seed clams were transplanted from Taehwa river estuary in Ulsan city in June 2008. Over 23 months of sampling, the mean grain size and the sorting in the experimental site containing the crushed oyster shell were significantly higher than the control site. The ignition loss, water content, chemical oxygen demand (COD) and acid-volatile sulfide (AVS) level were also significantly higher in the crushed oyste shell added substratum. Survival of the clams transplanted to the crushed oyster shell added substratum was significantly higher and all the clams transplanted to the normal muddy substratum died in August 2009, 13 months after the transplantation. At the end of the experiment in April 2010, the transplanted clams reached 36.10 mm in shell length and 8.92 g in total weight with survival of 43.5%. Our study suggested than crushed oyster shell added in the mud dominant substratum greatly improved living condition and survivability of clams.

• Microbiology and Biotechnology Letters
• /
• v.36 no.2
• /
• pp.87-95
• /
• 2008

Probiotics are live organisms that when administered in adequate amounts confer a health benefit on hosts. The administration of direct-fed microbials (DFM) such as lactobacilli and bacillus, may be a more direct approach to beneficially alter gastrointestinal microflora than altering dietary ingredients or supplementing with growth-promoting levels of antibiotics. It is apparent that microbes have an important influence on immune development and resistance to infection; that microbes are not static colonizers of our bodies, but are dynamic, symbiotic coresidents. And it can improve the surrounding environments; decrease the malodor caused by degrade the excrement. Recently, new paradigm such as environment protection and safe food have been settled. In domestic farm house, there is a great demand for probiotics as a substitute of antibiotics for the improvement of environmental quality and the production of a competitive goods. Probiotics circulated in a country have three categories: an animal medicine permitted by national veterinary research quarantine service (NVRQS), a support feed registered in city or country house, and not-registered goods. However, lots of unqualified goods were produced and circulated. And thus, it is in urgent need of evaluating the present situation and effect of probiotics. This study was conducted to evaluate the system of a probiotics as a livestock-environment improving agents for the alternation of antibiotics and quality control of it.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.3-16
• /
• 2014

Car exhaust $CO_2$ gas reduction and fuel efficiency of the car lighter for the current era is a big challenge. The developments of high-performance Nd magnets, Li-ion secondary battery and exhaust gas purification performance of PGM catalysts used in the lightweight EV and HEV are activated. Country in order to improve the car lighter and function that use the resources of rare metals are ubiquitous imported from China because of export supply control, as soaring prices have unstable supply and demand. Compared to the emissions from the next-generation automotive recycling, waste scarce resources need to be. This study investigated the recycling technology analysis and development of the information technology, or delivered to the researchers by giving national car industry aims to contribute to the development. Findings, pulmonary high-performance motor vehicle emissions in the exhaust gas purification PGM Catalysts, Li-ion battery and Nd magnets recycling technology, such as pre- and post-processing techniques to classify technology, pre-urban mining technology mechanical separation by screening techniques under development, the study and post-processing technology has, pyro and hydro metallurgical smelting technology is established. Waste Recycling in terms of economic efficiency of mechanical components for the intensive study of screening techniques is needed.

• Journal of Korean Society of Transportation
• /
• v.25 no.3
• /
• pp.55-63
• /
• 2007

This paper analyzes the relative efficiency of Korea's logistics industry with the DEA-ANP model from 2003 to 2005. To measure the efficiency, this paper used the numbers of employees, fixed assets. total capital. and operating costs as input factors and sales amounts and net incomes as output factors. The average efficiency score of the entire logistics industry is 0.175, so most logistics companies in Korea should improve their current inefficiencies. The industry with the highest efficiency score is marine transportation. with an average three-year efficiency score of 0.3692. In terms of sales and high efficiency. most of the highest-ranked companies belong to the marine transportation industry, so marine transportation has the most influence on raising the efficiency score of Korea's logistics industry. To improve the inefficiency of inputs that exists overall in the logistics industry it is necessary to control excessive numbers of employees. To improve the amount of sales, it is necessary to make a policy of satisfying various logistics demands, continuous investments, and attracting foreign logistics demand: such things will help strengthen the international competitiveness of Korea's logistics industry.