• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.373-375
• /
• 2003

애드 혹 네트워크는 기존의 하부 기반구조를 필요로 하지 않고도 이동 노드들 사이의 통신이 가능한 네트워크를 의미한다. 현재 애드 혹 라우팅 프로토콜에 관련하여 IETF MANET에서는 단일 경로를 제공하는 라우팅 프로토콜들이 제안되어 있으나 애드 혹 네트워크의 특성상 노드의 잦은 이동으로 인해 빈번한 경로 실패가 발생함으로 인하여 큰 오버헤드와 지연시간을 가지고 있다. 이러한 문제를 해결하기 위해 다양한 다중경로 설정 메커니즘들이 제안 되었으나 추가적인 제어 메시지와 복잡한 메시지 처리 과정으로 인하여 애드 혹 노드의 제한된 처리 능력과 네트워크 자원을 소모를 가져왔다. 본 연구에서는 대표적인 요구기반(on demand) 방식의 단일경로 라우팅 프로토콜인 AODV와 다중경로 라우팅 프로토콜 AOMDV 의 단점을 보완한 저비용 다중경로 메커니즘을 제안한다.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2003.06a
• /
• pp.129-134
• /
• 2003

In this paper, we determine optimal reduction in the lead time and setup cost for some stochastic inventory models. And we propose more general model that allow the backorder rate as a control variable. We first assume that the lead time demand follows a normal distribution. And we assume that the backorder rate is dependent on the length of lead time through the amount of shortages. The stochastic models analyzed in this paper are the classical continuous and periodic review policy models with a mixture of backorders and lost sales. For each of these models, we provide a sufficient conditions for the uniqueness of the optimal operating policy. We also develop algorithms for solving these models and provide illustrative numerical examples.

• Journal of the Korea Society for Simulation
• /
• v.8 no.1
• /
• pp.63-76
• /
• 1999

Recently in manufacturing environment, manufacturing order is characterized by unstable market demand, shorter product life cycle, a variety of product and shorter production lead time. In order to adapt this manufacturing order, flexible manufacturing systems(FMS) in manufacturing technology advances into the direction that machines become further versatile functionally and that tools are controlled by fast tool delivery device. Unlike conventional FMS to mainly focus on part flow, it is important to control tool flow in single-stage multimachine systems(SSMS), consisting of versatile machines and fast tool delivery device. This research is motivated by the thought that exact estimation of tool competition at part release in SSMS enhances the system performance. In this paper, in SSMS under dynamic tool allocation strategy to share tools among machines, we propose real-time part release and tool allocation algorithms which can apply real factory and which can improve system performance.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.1
• /
• pp.31-43
• /
• 2005

The new HVAC system is developed to lower the conveyance energy and building height using IAV(Increasing Air Volume) technique. IAV units which are equipped in each zone carry out air-conditioning and supply fresh air by induction of outdoor air in main duct. The design program which decides size of OAHU and IAV unit according to air conditioning load and fresh air demand of each zone is presented. The control system is developed to operate efficiently HVAC system and IAV unit, so that individual zone operation and well-deal with partial load and IAQ problem are possible. The new system is investigated in model building and makes more profit in conveyance energy. size of air conditioning facilities room and building height than VAV system. But in construction cost it is worse by about 15 percentage.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.2 no.1
• /
• pp.93-100
• /
• 2004

Shoulder impingement syndrome is cause by the collision of acromion, acrominoclaviclar joint, coracoacromino ligament, coracoid process and synovial sac, biceps brachiialis tendon, rotator cuff muscle. Treatment for Shoulder impingement syndrome is genetally classified into two different methods; preservative method and operational method. Operational method includes rotator cuff sutura, anterior acromioplasty, arthroscope decompression. Preservative method includes rest, medicinal therapy, physical therapy. Physical therapy concentrates on pain control, functional recovery and prevention of disease progress. It is also important for physical therapy to maintain the strength of rotator cuff. Strengthening rotator cuff decreases the collision and helps the stability of shoulder joint. In conclusion, it must be aware that shoulder impingement syndrome and some other shoulder problem demand different treatment, which results in a better outcome.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.16 no.1
• /
• pp.55-59
• /
• 2016

Dental treatment under sedation requires various sedation depths depending on the invasiveness of the procedure and patient drug sensitivity. Inappropriate sedation depth may cause patient discomfort or endangerment. For these reasons, patient-controlled sedation (PCS) pumps are commonly used. Patients are able to control the sedation depths themselves by pushing the demand button after the practitioner sets up the bolus dose and lock-out time. Dexmedetomidine is an ${\alpha}$-2 adrenoreceptor agonist with sedative, analgesic, and anxiolytic properties. It has been widely used for sedation for its minimal respiratory depression; however, there are few studies on PCS using dexmedetomidine. This study assessed the applicability of dexmedetomidine to PCS.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.12
• /
• pp.18-29
• /
• 2014

This paper proposes the integration of photovoltaic (PV) and energy storage systems for sustained power generation. In this proposed system, whenever the PV system cannot completely meet load demands, the super capacitor provides power to meet the remaining load. A power management strategy is designed for the proposed system to manage power flows between PV array systems and supercapacitors (SC). The main task of this study was to design PV systems with storage strategies including MPPT with direct control and an advanced DC-link controller and to analyze dynamic model proposed for a PV-SC hybrid power generation system. In this paper, the simulation models for the hybrid energy system are developed using Matlab/Simulink, SimPowerSystems and Matlab/Stateflow tool. This is the key innovative contribution of the research paper. The system performances are verified by carrying out simulation studies using practical load demand profile and real weather data.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.196-198
• /
• 2003

The low load power factor causes various problems such as the increase of the power loss and the voltage instability. The demand of reactive power increases continuously with the growth of active power and the restructuring of electric power companies makes the integrated management of ractive power troublesome, from which the systematic control of load power factor is required. In this paper, the load power factor sensitivity of the generation cost is derived and its effects in supplying the reactive power and enhancing the load power factor are analyzed in a small-scale power system. The load power factor sensitivity of the generation cost is applied for determining the locations and capacities of reactive power compensation devices. It is shown that the generation cost can be reduced and the system power factor can be enhanced effectively using the load power factor sensitivity.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.54-56
• /
• 2005

The paper proposes the solar photovoltaic power generation system method for photovoltaic system to solve the power shortage due the sudden power demand. So that supplied electric power to system at appearance during surplus electric power minute and unit moment link driving with common use system is available, digital PLL circuit system voltage through composition and phase of solar photovoltatic power generation system to do synchronization do. Feed forward controller was applied to get fast current response Solar cell that is changed by solar radiation always kept the maximum output when it used Step up chopper. The dynamic character had checked through simulation used Matlab Sumulink and confirmed through an experiment.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.11
• /
• pp.647-654
• /
• 2003

As electrical power system has become complicated and enlarged to cope with the increasing electric demand, it has to be expected that higher speed, higher reliability, higher function and higher arithmetic ability in protective relay should be realized. Therefore, in this papers, by hardware design and implementation used DMA controller that transfer blocks of data to any location in the memory map without interfering with CPU operation, CPU utilization is increased effectively, as a result it made possible to implement multi-function digital protective relay which has high trust and high function of protection as well as control and metering for power transformers using single processor(DSP).