• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.187-198
• /
• 2008

There are usually plenty of material inventories in a construction site. More inventories can meet unexpected demands, and also they may have an economical advantage by avoiding a probable escalation of raw material costs. On the other hand, these inventories also cause negative aspects to increase costs for storing redundant inventory as well as decreasing construction productivity. Therefore, a proper method of deciding an optimal level of material inventories while considering dynamic variations of resources under uncertainty is very crucial for the economical efficiency of construction projects. This research presents a stochastic modelling method for construction operations, particularly targeting a work process involving on-site fabrication of raw materials like iron-rebar process (delivery, cut and assembly, and placement). To develop the model, we apply the concept of factory physics to depict the overall components of a system. Then, an optimal inventory management model is devised to support purchase decisions where users can make timely actions on how much to order and when to buy raw materials. Also, optimal time lag, which minimizes the storage time for pre-assembled materials, is obtained. To verify this method, a real case is applied to elicit an optimal amount of inventory and time lag. It is found that average values as well as variability of inventory level decreased significantly so as to minimize economic costs related to inventory management under uncertain project condition.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.11
• /
• pp.256-264
• /
• 2020

Industrial Wireless Sensor Networks (IWSNs) is exploited to achieve various objectives such as improving productivity and reducing cost in the diversity of industrial application, and it has requirements such as low-delay and high reliability packet transmission. To accomplish the requirement, the network manager performs graph construction and resource allocation about network topology, and determines the transmission cycle and path of each node in advance. However, this network management scheme cannot treat mobile devices that cause continuous topology changes because graph reconstruction and resource reallocation should be performed as network topology changes. That is, despite the growing need of mobile devices in many industries, existing scheme cannot adequately respond to path failure caused by movement of mobile device and packet loss in the process of path recovery. To solve this problem, a network management scheme is required to prevent packet loss caused by mobile devices. Thus, we analyse the location and movement cycle of mobile devices over time using machine learning for predicting the mobility pattern. In the proposed scheme, the network manager could prevent the problems caused by mobile devices through performing graph construction and resource allocation for the predicted network topology based on the movement pattern. Performance evaluation results show a prediction rate of about 86% compared with actual movement pattern, and a higher packet delivery ratio and a lower resource share compared to existing scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.29-39
• /
• 2008

Greedy routing which is easy to apply to geographic wireless sensor networks is frequently used. Greedy routing works well in dense networks whereas in sparse networks it may fail. When greedy routing fails, it needs a recovery algorithm to get out of the communication void. However, additional recovery algorithm causes problems that increase both the amount of packet transmission and energy consumption. Communication void is a condition where all neighbor nodes are further away from the destination than the node currently holding a packet and it therefore cannot forward a packet using greedy forwarding. Therefore we propose a VODUA(Virtually Ordered Distance Upgrade Algorithm) as a novel idea to improve and solve the problem of void. In VODUA, nodes exchange routing graphs that indicate information of connection among the nodes and if there exist a stuck node that cannot forward packets, it is terminated using Distance Cost(DC). In this study, we indicate that packets reach successfully their destination while avoiding void through upgrading of DC. We designed the VODUA algorithm to find valid routes through faster delivery and less energy consumption without requirement for an additional recovery algorithm. Moreover, by using VODUA, a network can be adapted rapidly to node's failure or topological change. This is because the algorithm utilizes information of single hop instead of topological information of entire network. Simulation results show that VODUA can deliver packets from source node to destination with shorter time and less hops than other pre-existing algorithms like GPSR and DUA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.425-435
• /
• 2017

Structural analysis is used not only for large enterprises, but also for small and medium sized ones, as a necessary procedure for strengthening the certification process for product delivery and shortening the time in the process from concept design to detailed design. Open-source solvers that can be used atlow cost differ from commercial solvers. If there is a problem with the input data, such as with the grid, errors or failures can occur in the calculation step. In this paper, we propose a pre- and post-processor that can be easily applied to the analysis of mechanical structural problems by using the existing structural analysis open source solver (Caculix, Code_Aster). In particular, we propose algorithms for analyzing different types of data using open source solvers in order to extract and generate accurate information,such as 3D models, grids and simulation conditions, and develop and apply information analysis. In addition, to improve the accuracy of open source solvers and to prevent errors, we created a grid that matches the solver characteristics and developed an automatic healing function for the grid model. Finally, to verify the accuracy of the system, the verification and utilization results are compared with the software used.

• Journal of Preventive Medicine and Public Health
• /
• v.13 no.1
• /
• pp.53-66
• /
• 1980

The editorials of the leading newspapers may reflect as well as help formulate the public opinions to a significant degree. Bearing this in mind, this study was carried out to provide information useful in formulating such public health policies that could practically meet the social interests and demands in health appearing in the editorials of the newspapers. This analysis covered the editorials of 5 leading newspapers such as Donga Ilbo, Chungang Ilbo, Hankook Ilto, Chosun Ilbo and Seoul Shinmoon for about 10 years from Jan. 1st, 1970 through Oct. 31th, 1979. The major findings are as follows: 1. The total number of health-concerned editorials in the five daily papers for the period was 1,768 or occupied 6.4% of the total editorials of the same sources. The increasing trend of frequnecy of the health-concerned editorials since 1976 indicates the increment of social interests and demands in health. Analysing the contents, environmental pollution received the greatest attention in those editorials, which was followed by medical affairs, environmental sanitation, and disease control in order in terms of frequency of appearance. However, there was a tendency that the interests in the environmental pollution, medical affairs and social welfare tended to increase year by year, whereas those in environmental hygiene and disease control comparatively decreased. 2. Motives of dealing with the health-concerned editorials were provided by announcement of the governmental policies and implementation for 25.6% and by out-breaks of the relevant events for 23.9%. This tendency coincides with the general characteristics of the editorials that reflect the timely issues. Closely analysing, however, the fact that the motives engendered by the out-breaks of the relevant events or by the season concerned comparatively tended to decrease as years pass by, indicates that the editorials tend more to seek the future-oriented demands in health rather than the current issue-oriented. 3. The editorials appeared to be more concerned with the governmental policies. 95.7% of all the editorials analysed were addressed to the government. This signifies the role of government in the field of public health and medical affairs. Their attitudes toward health-related policies of the government were much more negative than the other editorials that were addressed to the government in other fields. This suggests that the governmental interests in health were neither sufficient nor fair. 4. What the editorials most stressed were; (1) increment of governmental interests in health, (2) improvement of the governmental health administration, (3) enriching the basic statistics, and (4) development of various technologies pertinent to health affairs and disease control, and so forth. However, must of their suggestions were not concrete but rather abstract and conceptual. 5. The editorials also expressed strong interests in research area. The areas of the needed research most suggested by items are; (1) development of effective health care delivery system, (2) establishment of more practical system of calculating medical cost, (3) implementation of effective policies to control degenerative diseases, (4) division of medical care services and pharmaceutical services systems, (5) effective ways to prevent Co poisoning accidents, (6) changing status of environmental pollution and its effects upon health, and (7) status of occupational diseases, and so forth. 6. There were some editorials -not small in quantity -that have risk to mislead the public opinions as well as the health policies due to lack of professional knowledge of the writers. It is desirable to establish some kind of mechanism that screens the erroneous contents of the editorials to help prevent misleading opinions.

• Health Policy and Management
• /
• v.7 no.1
• /
• pp.100-124
• /
• 1997

In order to suggest the strategies for participation in the PPS(Prospective Payment System), analyses were performed based on variations in utilization pattern and changes in revenues of hospitals in 10 selected KDRGs. The data was collected from the claims data of a tertiary hospital in Kyunggido from September 1, 1995 to August 31, 1996. The studies consisted of 1, 718 inpatients diagnosed for lens procedures, tonsilectomy &/or adenoidectomy, appendectomy with complicated principal diagnosis, Cesarean section, or vaginal delivery without any complications. The resources used in each KDRG were measured including average length of stay, total charges, number of orders, intensity of medical services, frequencies of medical services, the rate of non-reimbursable charges, and the rate of non-reimbursable orders. Then, the changes in hopital revenues due to the composition of medical fee schedules under the PPS were estimated as follows: 1) The variations in average lenght of stay, total charges, number of orders, the intensity of medical services, the frequency of medical services, the rate of non-reimbursable charges, and the rate of non-reimbursable orders among the 10 KDRGs were comparatively small. 2) The average lenght of stay was the longest(6.0 days) for appendectomy with complicated principal diagnosis, while it was the shortest(2.1 days) for two vaginal deliveries. Statistically differences existed in the average length of stay among physicians and among the dates of admission in several KDRGs. 3) The total charges were the highest for lens procedures(1, 716, 000 won), while the lowest charges were for two vaginal deliveries(558, 000 won). Statistically differences in the total charges were found among physicians in several KDRGs: however, there were no differences with the dates of admission. 4) The number of orders was the greatest(155) for appendectomy with complicated principal diagnosis, while it was the smallest(75) for the two vaginal deliveries. Statistical differences in the number of orders did not exist among physicians in the KDRGs. 5) Significant differences were found in the intensity of medical services, and in the frequency of medical services among physicians in the KDRGs. 6) The rate of non-reimbursable charges for each KDRG was not related to the rate of non-reimbursable orders. The rate of non-reimbursable orders was the highest(36.0%) for lens procedures, while the lowest rate(11.6%) was for appendectomy with complicated principal diagnosis. The rate of non-reimbursable charges was the highest(39.4-39.7%) for vaginal deliveries, while the lowest rate(13.1%) was for tonsillectomy &/or adenoidectomy(<17 ages). 7) If the physician's practicing style were not change under the PPS, the hospital revenuses could be increased by 10%, and the portion of patient payment could be decreased by 1.4-22.4%. However, the non-reimbursable charges for showed little change between two reimbursement systems. Based upon the above findings, this hospital could be eligible for participation in the PPS(Prospective Payment Systm). However, the process of diagnosis and treatment should be standardized, inentifying methods to reduce cost and to assure quality of medical care. Furthermore, consideration should be given to finding ways to increase patient volume.

• Journal of Internet Computing and Services
• /
• v.18 no.3
• /
• pp.71-83
• /
• 2017

In recent years, by utilizing the greatest strengths of process mining, the various research activities have been actively progressed to use auditing work of business organization. On the other hand, there is insufficient research on systematic and efficient analysis of massive data generated under big data environment using process mining, and proactive monitoring of risk management from audit side, which is one of important management activities of corporate organization. In this study, we intend to realize Hadoop-based internal audit integrated real-time monitoring system in order to detect the abnormal symptoms in prevent accidents in advance. Through the integrated real-time monitoring system for purchasing audit, we intend to realize strengthen the delivery management of purchasing materials ordered, reduce cost of purchase, manage competitive companies, prevent fraud, comply with regulations, and adhere to internal control accounting system. As a result, we can provide information that can be immediately executed due to enhanced purchase audit integrated real-time monitoring by analyzing data efficiently using process mining via Hadoop-based systems. From an integrated viewpoint, it is possible to manage the business status, by processing a large amount of work at a high speed faster than the continuous monitoring, the effectiveness of the quality improvement of the purchase audit and the innovation of the purchase process appears.

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.329-334
• /
• 2007

Osmotic pellet system, which is one of the oral drug delivery systems, has been developed to improve manufacturing process, reduce product cost and other problems of osmotic tablet systems. Osmotic pellet is consisted of water swellable seed layer, drug layer, and membrane layer. Among them, the membrane layer plays an important role in a control of the drug release. In this work, we examined the effect of ratio for Eudragit RL and RS on the drug release behavior. Osmotic pellet with nifedipine as a model drug was easily obtained in a good yield by fluidized bed coater. Osmotic pellet showed round morphology with a range of size $1300{\sim}1500\;{\mu}m$. In the experiment of nifedipine release, the release amount increased with the increase of the ratio of Eudragit. This is due to the fact that Eudragit RL contains more hydrophilic quaternary ammonium group than Eudragit RS. Additionally, the release amount was retarded with increasing the membrane thickness. There are no differences in the release amount measured at the different pH 1.2, 6.5, 6.8, and 7.2. In conclusion, it was found that the drug release from osmotic pellets depended on the composition ratio and coating thickness of membrane layer.

• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.129-137
• /
• 2009

While the broadband network and multimedia technologies have been developing, the commercial market of digital contents also has been widely spreading with recently starting IPTV. As the IPTV services are getting to be generalized and popularized, the contents protection and authentication system tends to draw more attentions. So we need a system that can protect contents and allow only authenticated person to use right service by controling user authority and using content encryption. Until now, the conventional protection and authentication system is taking advantages of merits both in CAS and DRM. But the weak point of this system are in high costs, complexity and using HW. For resolving these problems, in this paper, we proposed IPTV contents protection and authentication system using OTP. When we transmit the content encrypted by OTP key using contents delivery technology, we operate XOR with contents using another settop-box's OTP key which was transmitted from distribution server. And contents are reconstructed and transmitted to the settop-box, In the end, downloaded content are encrypted by OTP key and are superior in content protection when contents redistribution. Since OTP use double-authentication elements in encryption process, this method is excellent in content protection. And it is very effective in cost aspect because it could be implemented by SW program. Another benefit is that we can shorten the development time period. In this paper, we propose and find its possibility as a new content protection and authentication method suitable for IPTV services.

• Journal of Distribution Science
• /
• v.14 no.5
• /
• pp.51-57
• /
• 2016

Purpose - In the year of 2015 and 2016, one of the items that got attention in CES was a drone. It has been 100 years since a drone emerged, but most were used for military purposes. As its use became diverse as of 2010, it got attention of the general public. In Korea, it was in 2011 that a drone was known to the public through an aerial video shooting for television program. This study tried to come up with suggestions by comparing domestic with overseas cases, and tried to consider the related technologies and systems with applying the role of drones in logistics service. Research design, data, and methodology - The overseas cases were regarded as drone's logistical purpose. The Prime Air service by US Amazon is still not commercialized and under pre-testing due to Federal Aviation Regulations, although it started in 2013. In Germany, DHL succeeded in delivering service testing which is called Parcelcopter, but it is not commercialized yet. Other than these, there are more attempts to prepare logistics service in China with Taobao, in France with Geopost's test, and in Africa. In Korea, CJ Korea Express tested delivery with a self-developed drone Results - In order to study for utilizing drones for logistics as the prerequisites, some overseas and domestic cases, which are currently considered, were reviewed. Also, the technologies and institutional requirements to commercialize drones for logistical purpose were reviewed. The reasons for using drones in logistics is to ensure the price competitiveness by reducing cost. The empirical test also will be needed because drone pilot areas are designated by ministry of land, infrastructure and transport. Conclusions - In order to utilize drones in logistics and foster the industry, this study would like to suggest the followings. First of all, size of drones for logistics needs to be fixed and their operating system should be standardized. Centralized investment resources are needed through standardization to ensure the market occupancy. Secondly, it is necessary to get the converged businesses that do research, develop and commercialize drones with the investment of private sector. Example can be found in Korea aerospace Industries. We can respond to the rapid growth of the market with intensive investing by integrating the private sector investment. Thirdly, institutional arrangements are needed to be established quickly. In the case of high-technologies like drones, institutional support often does not follow the rapid development of the technology. The problems can be found in securing drones-only airspace, creating drone-specialized pilot's license, matters related to remote controller and complementary regulations for drones in Aviation Act. If these regulations are not prepared or complemented at the right timing, technologies cannot be commercialized even though the development is completed. Fourthly, there is a need to secure the transparency regarding possible privacy and personal information protection problem while operating drones. Finally, in order to foster this new industry, government should focus on supporting R&D more in the long term than short term outcomes.