• Journal of Korea Water Resources Association
• /
• v.32 no.6
• /
• pp.731-740
• /
• 1999

Autocorrelation function is widely used as a tool measuring linear dependence of hydrologic time series. However, it may not be appropriate for choosing decorrelation time or delay time ${\tau}_d$ which is essential in nonlinear dynamics domain and the mutual information have recommended for measuring nonlinear dependence of time series. Furthermore, some researchers have suggested that one should not choose a fixed delay time ${\tau}_d$ but, rather, one should choose an appropriate value for the delay time window ${\tau}_d={\tau}(m-1)$, which is the total time spanned by the components of each embedded point for the analysis of chaotic dynamics. Unfortunately, the delay time window cannot be estimated using the autocorrelation function or the mutual information. Basically, the delay time window is the optimal time for independence of time series and the delay time is the first locally optimal time. In this study, we estimate general dependence of hydrologic time series using the C-C method which can estimate both the delay time and the delay time window and the results may give us whether hydrologic time series depends on its linear or nonlinear characteristics which are very important for modeling and forecasting of underlying system.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.3
• /
• pp.126-131
• /
• 2000

Through many users employ TCP of which the performance has been proved in Internet, but many papers Proposed to improve TCP performance according to varying network architecture. In Particular, BWDP(bandwidth-delay Product) grew larger because of the increasing delay in satellite link and the network's speed-up. To consider these increased bandwidth-delay product, it is suggested that TCP options include Window Scale option. TimeStamp option, and PAWS. Because TCP window size should be commonly high in the network with these increased bandwidth-delay product, the multiple decrease and linear increase scheme of current TCP would cause underflow and instability within network. Then TCP performance is reduced as a result. Thus, to improve TCP congestion control algorithm in the network which has large sized window, this paper proposes the congestion control scheme that controls window size by using TimeStamp option.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.684-693
• /
• 2011

Measurement time delay in the transfer alignment is very important. It has been well known that the time delay degrades the alignment performance and makes some navigation errors on the transfer alignment of slave INS(SINS). Therefore there are many schemes to eliminate that time delay but the compensation technique through the estimation by Kalman filter through modeling the time delay as a random constant is generally used. In the case of change over measurement time delay or the large measurement time delay, estimation performance in the existing compensation technique is degraded because model of time delay is not correct any more. In this paper, we propose the method to keep the time delay almost constant even though in the abnormal communication state and very small through feedback compensation using double buffer. Double buffer consists of two moving window to temporarily store measurements from master INS and slave INS in real time.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.6
• /
• pp.568-576
• /
• 2010

It is widely known that the leak locating of underground plastic pipelines is much more difficult than that of cast iron pipelines. The precision of the leak locating depends upon the speed of leak signal and the time delay estimation between the two sensors on the pipeline. In this paper, six different windowing filters are considered to improve the time delay estimation especially for the plastic pipelines. The time delay is usually estimated from the peak time of cross-correlation functions. The filtering windows including rectangle, Roth, Wiener, SCOT, PHAT and maximum likelihood are applied to derive the generalized cross-correlation function and compared each other. Experimental results for the actual plastic underground water supply pipeline show that the introduction of the filtering windows improved the precision of time delay estimation. Some window functions provide excellent leak locating capability for the plastic pipe of 98 m long, which is less than 1 % of the pipe lengths. Also a new probabilistic approach that the combinations of all results from each filtering window is suggested for the better leak locating.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.2
• /
• pp.110-117
• /
• 2018

In this paper, we propose a low delay window switching MDCT (Modified Discrete Cosine Transform) method for speech/audio coder. The window switching algorithm is used to reduce the degradation of sound quality in non-stationary trasient duration and to reduce the algorithm delay by using the low delay TDAC (Time Domain Aliasing Cancellation). While the conventional window switching algorithms uses overlap-add with different lengths, the proposed method uses the fixed overlap add length. It results the reduction of algorithm delay by half and 1 bit reduction in frame indication information by using 2 window types. We apply the proposed algorithm to G.729.1 based on MDCT in order to evaluate the performance. The propose method shows the reduction of algorithm delay by half while speech quality of the proposed method maintains same as the conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2401-2408
• /
• 1997

The measured pulse shapes provided in the given data package demonstrated pulse distortions due to laser speckle. the distorted pulse shapes were carefully analyzed, modeled, and then applied to the DTTL(Digital-data Transition Tracking Loop)[1] bit synchronizer simulator to measure the mean time delay and its delay variation performance. The result showed that the maximum mean time delay variation with the modeled data was 12.5% when window size equals 1. All the data given were located within this modeled boundary and the maximum eman time delay variation was 7% in this case. The mean time delay variation was known to be smaller by reducing the window size [2][5][6]. The mitigated delay variation was 2.5% in the modeled case and 1.4% in the data set given when the windown size equals 0.1. With the digital DTTL insteal of analog DTTL, similar results was obtained.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.5
• /
• pp.347-354
• /
• 1991

In this paper, the Automatic Tracking Window(ATW) algorithm is applied to the Generalized Cross-Correlation(GCC) time delay estimation algorithm as a preprocessing. The Linear Prediction(LP) algorithm, which is a pararmetric spectral estimation algorithm, is applied to the time delay estimation. And the ATW, a preprocessing algorithm is applied to this algorithm too. This paper shows that the ATW algorithm attenuates the sidelobes very much and improves the resolution of the timedelay estimation.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.31-43
• /
• 1996

In this paper, we analyze the delay characteristics of the multimdedia traffic in B-ISDN, and propose a weighted variable-size window estimator considering the QoS characteristics of the media and the variable delay characteristics of the networks, and present a delay estimator-based synchronization protocol for the efficient synchronization in ATM-based B-ISDN. The proposed estimator assigns a high weight value to recent cells arrived in the receiver, and suitably adjusts window size in order to efficiently adapt to delay variation by the prameter to detect the delay variation of the networks. The proposed synchronization protocol estimates end-to-end delay by the weighted variable-size window estimator, and dynamically schedules th evirtual channel of the transmitter to playout multimedia data on time in the receiver. Also, we evaluate the performance of the delay estimator, which is the most importnat functional element in our proposed synchronization protocol, by the simulation and analyze the results of the simulation.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.135-137
• /
• 2002

In the favor of adjusting microwave signal, Hairpin type Filter, which delay microwave signal enough to several nanosecond, is a key component. One of the main advantage in using Hairpin type Filter is a conveniency for equipping with Delay Module, and because of having a wide bandwidth, Hairpin type Filter can be designed to satisfy the most applications. In this work, we attempted to estimate the delay time in a superconductive hairpin type filter A software to synthesize even and odd order equiripple hairpin type filter has been developed. This software arbitrarily locate its transfer zeros making symmetric of asymmetric amplitude response and equalizing group delay. Borland C++ compiler has been used. The program was designed to run under MS-DOS, Window 98, Window 2000. The program optimizes the position of the transfer function zeros in order to fulfill the group delay specification masks. We designed and fabricated a hairpin type HTS 2-pole microstrip bandpass filter to operate at 5.8Ghz. The fabrication method was pulsed laser deposition and YBCO films were deposited on sapphire substrates with a Ce$O_{2}$ thin layer as a buffer layer. We also developed a new style hairpin type filter by using interdigitide inner-pole. Compared to the same size regular hairpin type filters, our filters had a lower center frequency.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.774-779
• /
• 2012

We design and implement a RTT (Round Trip Time) based TCP (Transmission Control Protocol) for USN (Ubiquitous Sensor Network). We adopt a basic update algorithm for window size from FAST TCP that uses the queuing delay at link as the congestion measure. The designed TCP estimates the queuing delay at link from the measured RTT in the network layer, and updates the window size based on the estimated queuing delay. The designed TCP allows to utilize the full capacity of USN links and avoids the waste of the given link capacity that is common without the flow control in the transport layer. The experiment results show that the window size of the sender converges within a small range of variations without any packet loss, and verify the stability and performance of the designed TCP.