• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.12
• /
• pp.54-60
• /
• 2005

In this paper, fault tolerant control for aircraft is being discussed. The authors propose a fault tolerant control algorithm based on time delay control. Time delay control is an effective method to deal with unknown dynamics. The proposed algorithm has no parameter to be updated and needs no prior information of faults. These are the primary advantages of the proposed method. The algorithm uses output feedback. The design and the stability condition are presented by following the existing proof. The proposed algorithms are verified by simulation examples.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.36.2-36.2
• /
• 2016

In mm-VLBI, the quality of observation data is largely affected by atmospheric effect. The most challenging matter is that the phase of correlator output fluctuates rapidly resulting from a variation of atmospheric propagation delay. Consequently, it is demanding to achieve high Signal-to-Noise ratio by integrating data in time domain before calibrating atmospheric delay. However, Korean VLBI Network (KVN) has a unique system to make a 4-frequency (22/43/86/129 GHz) simultaneous observation in mm-wavelength and Frequency Phase Transfer (FPT) calibration technique has effectively removed atmospheric delay in the simultaneous multi-frequency observation of the KVN. For astrometric and astrophysical studies, we evaluated the FPT performance of KVN in various observing conditions. Using the total 38 bright AGNs, we have compared atmospheric conditions such as ground-based weather information, system temperature, atmospheric delay with the calibration results of FPT at 22/43/86/129 GHz during the five experiments in 2013, and quantified its performance in terms of coherence function and Allan variance. We present the analysis result of the relation between the FPT performance and observing conditions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.79-84
• /
• 2017

This paper is a multi-input multi-path (Multiple-input multiple-output: MIMO) using a space-alternating generalized expectation maximization(SAGE) algorithm in the parameter channel and determine the channel estimation performance. Estimated by the algorithm, SAGE time-varying channel environment, the channel parameters estimated from the parameters of the channel measured in the island region 781 of the band in order to compare the performance and compares the original data. This allows you to check the performance of the algorithm SAGE and is highly stable to delay spread (Delay Spread), the diffusion angle of arrival (Arrive of Angular Spread) performance in terms of accuracy down through the SAGE algorithm for estimating a more general calculation parameters.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.9
• /
• pp.3572-3593
• /
• 2015

This article investigates the topology control problem in the space information network (SIN) using a hierarchical autonomous system (AS) approach. We propose an AS network topology control (AS-TC) algorithm to minimize the time delay in the SIN. Compared with most existing approaches for SIN where either the purely centralized or the purely distributed control method is adopted, the proposed algorithm is a hybrid control method. In order to reduce the cost of control, the control message exchange is constrained among neighboring sub-AS networks. We prove that the proposed algorithm achieve logical k-connectivity on the condition that the original physical topology is k-connectivity. Simulation results validate the theoretic analysis and effectiveness of the AS-TC algorithm.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.11
• /
• pp.1398-1406
• /
• 2004

The nonlinear signals from an impedance meter for the area average void fraction in two-phase flow have been analyzed to construct a phase space trajectory. The pseudo phase space was constructed with the time delay and proper dimensions. The time delay and the embedding dimension were chosen by the average mutual information and by the false nearest neighborhood, respectively. The attractor-density-map of projected states was used to produce the two dimensional probability distribution functions (2D-PDF). Since the developed 2D-PDF showed clear distinction of the flow patterns, the flow regime identification was made with three rules and with the 2D-PDF. Also, the transition criteria of Mishima-Ishii agree well with the present results.

• Publications of The Korean Astronomical Society
• /
• v.24 no.1
• /
• pp.65-81
• /
• 2009

We present the performance test results of VLBI Correlation Subsystem (VCS) trial product which was being developed for 1 year from August 2007. It is a core component of Korea-Japan Joint VLBI Correlator (KJJVC). The aim for developing VCS trial product is to improve the performance of VCS main product to reduce the efforts and cost, and to solve the design problems by performing the preliminary test of the manufactured trial product. The function of VCS trial product is that it is able to process the 2 stations-1 baseline, 8 Gbps/station speed, 1.2 Gbps output speed with FX-type. VCS trial product consists of Read Data Control Board (RDC), Fourier Transform Board (FTB), and Correlation and Accumulation Board (CAB). Almost main functions are integrated in the FTB and CAB board. In order to confirm the performance of VCS trial product functions, the spectral analysis, delay compensation and correlation processing experiments were carried out by using simulation and real observation data. We found that the overflow problem of re-quantization after FFT processing was occurred in the delay compensation experiment. We confirmed that this problem was caused by valid bit-expression of the re-quantized data. To solve this problem, the novel method will be applied to VCS main product. The effectiveness of VCS trial product has been verified through the preliminary experimental results, but the overflow problem was occurred.

• 한국문예비평연구
• /
• no.65
• /
• pp.123-149
• /
• 2020

This study identified objective placeness throughout the writing of Na, Hye-seok, who was Korea's first female Western painter and early modern writer, and analyzed her spatiality around two keywords, "confined space" and "delay space." The investigator applied the concept of gender geography, which maintains that place experiences organize existence, and demonstrated the intrinsic aspects of placeness. First, confined spaces expressed the institutional contradictions of Joseon with the analogy of collapse and extinction. Inns and boarding houses were daily spaces and also temporary places of residence that she had to leave some day. Gyeongseong was a hybrid place of both success and failure. Secondly, Japan was a space of growth to study modernity and a delay space to escape from fear for Na. Her Western experiences underwent the procedure of discovering otherness inside a civilized state instead of self-colonization and asking questions about the places where she belonged. Na's place experiences and their connotations revealed in her writing show a gap between the ideal and reality of a subject facing her given destiny and between her inner conflicts. The present study demonstrated the daily conditions, social status, and characteristics of women through spaces beyond ideological placeness as a common idea, thus holding its significance. The specific daily and multiple nature produced in relations between a certain subject and the existential situation of a place will play significant roles in the theoretical extension of gender discourse in the future.

• Bulletin of the Korean Space Science Society
• /
• 2005.10a
• /
• pp.45-45
• /
• 2005

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.842-849
• /
• 2011

The transponder simulator designed to simulate the transponder of military satellite communication systems in the geostationary orbit is required to have time delay function, because of 250 ms delay time, when a radio wave transmits the distance of 36,000 km in free space. But, it is very difficult to develop 250 ms time delay device in the transponder simulator of 100 MHz bandwidth, due to unstable operation of FPGA, loss of memory data for the high speed rate signal processing. Up to date, bandwidth of the time delay device is limited to 45 MHz bandwidth. To solve this problem, we propose the new time delay techniques up to 100 MHz bandwidth without data loss. Proposed techniques are the low speed down scaling and high speed up scaling methods to read and write the external memory, and the matrix structure design of FPGA memory to treat data as high speed rate. We developed the satellite link simulator in 100 MHz bandwidth using the proposed new time delay techniques, implemented to the transponder simulator and verified the function of 265 ms time delay device in 100 MHz bandwidth.

• Tunnel and Underground Space
• /
• v.6 no.1
• /
• pp.39-47
• /
• 1996

The results of the regression analysis and comparative study between 120 vibration events by dynamite blasting and 68 vibration events by finecker blasting which were monitored in the test blasting are as follows: The ground vibration velocity of dynamite blasting of 0.12 kg charge weight per delay at 7.4 m above the explosive is higher than that of finecker blasting of 0.96 kg charge weight per delay. In the case of 0.12 kg charge weight per delay, the ground vibration velocity of finecker blasting is equal to 5.5% of that of dynamite blasting at the 10 m distance from explosive. The decrement of ground vibration velocity of dynamite blasting of above 0.12 kg charge weight per delay is larger than that of finecker blasting of below 0.96 kg charge weight per delay. The rate of ground vibration velocity of the finecker blasting to that of dynamite blasting decreases with the distance from explosives, but increases with the decrease of charge weight per delay. The increment of ground vibration velocity of finecker blasting is less than that of dynamite blasting with the increase of charge weight per delay at the same distance from explosives. Under the condition of the constant critical ground vibration velocity or use the same charge weight per delay, the blasting working by finecker rather than by dynamite is able to be performed at the nearer place to structures.