• Journal of Information Processing Systems
• /
• v.20 no.1
• /
• pp.131-147
• /
• 2024

A routing strategy based on traffic prediction and dynamic cache allocation for satellite nodes is proposed to address the issues of high propagation delay and overall delay of inter-satellite and satellite-to-ground links in low Earth orbit (LEO) satellite systems. The spatial and temporal correlations of satellite network traffic were analyzed, and the relevant traffic through the target satellite was extracted as raw input for traffic prediction. An improved gradient boosting regression tree algorithm was used for traffic prediction. Based on the traffic prediction results, a dynamic cache allocation routing strategy is proposed. The satellite nodes periodically monitor the traffic load on inter-satellite links (ISLs) and dynamically allocate cache resources for each ISL with neighboring nodes. Simulation results demonstrate that the proposed routing strategy effectively reduces packet loss rate and average end-to-end delay and improves the distribution of services across the entire network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.651-669
• /
• 2013

In this paper, we study a novel routing algorithm based on load balancing for multi-channel wireless mesh networks. In order to increase the network capacity and reduce the interference of transmission streams and the communication delay, on the basis of weighted cumulative expected transmission time (WCETT) routing metric this paper proposes an improved routing metric based on load balancing and channel interference (LBI_WCETT), which considers the channel interference, channel diversity, link load and the latency brought by channel switching. Meanwhile, in order to utilize the multi-channel strategy efficiently in wireless mesh networks, a new channel allocation algorithm is proposed. This channel allocation algorithm utilizes the conflict graph model and considers the initial link load estimation and the potential interference of the link to assign a channel for each link in the wireless mesh network. It also utilizes the channel utilization percentage of the virtual link in its interference range as the channel selection standard. Simulation results show that the LBI_WCETT routing metric can help increase the network capacity effectively, reduce the average end to end delay, and improve the network performance.

• Journal of the Korea Society for Simulation
• /
• v.16 no.1
• /
• pp.39-47
• /
• 2007

The travel speed between two locations within the downtown differs according to time horizon and district. Also, There is delay time on numerous traffic signals and bottle neck areas. It has an influence on planning the vehicle routing. However, there are almost no studies focusing on delay time for distance and travel time between two locations among the existing researches for vehicle routing problem (VRP). In this paper, we approach the real VRP by designing the model which estimates the delay time for traffic signal and bottle neck areas. The results of computation experiment demonstrate that proposed method performs well and have better solution than other method not considering the delay time.

• Journal of Communications and Networks
• /
• v.18 no.4
• /
• pp.580-588
• /
• 2016

Energy efficiency is the main objective in the design of a wireless sensor network (WSN). In many applications, sensing data must be transmitted from sources to a sink in a timely manner. This paper describes an investigation of the trade-off between two objectives in WSN design: minimizing energy consumption and minimizing end-to-end delay. We first propose a new distributed clustering approach to determining the best clusterhead for each cluster by considering both energy consumption and end-to-end delay requirements. Next, we propose a new energy-cost function and a new end-to-end delay function for use in an inter-cluster routing algorithm. We present a multi-hop routing algorithm for use in disseminating sensing data from clusterheads to a sink at the minimum energy cost subject to an end-to-end delay constraint. The results of a simulation are consistent with our theoretical analysis results and show that our proposed performs much better than similar protocols in terms of energy consumption and end-to-end delay.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.649-657
• /
• 2013

DTN flooding based routing protocol replicate the message copy to increase the delivery like hood that overloads the network resources. The probabilistic routing protocols reduce replication cost by forwarding the message to a node that holds high predictability value to meet its destination. However, the network traffic converges to high probable nodes and produce congestion that triggers the drop of previously stored messages. In this paper, we have proposed a routing protocol called as Connection frequency Buffer Aware Routing Protocol (CFBARP) that uses an adaptive method to maintain the information about the available buffer space at the receiver before message transmission. Furthermore, a frequency based method has been employed to determine the connection recurrence among nodes. The proposed strategy has performed well in terms of reducing message drop, message relay while increases the delivery probability.

• Journal of Communications and Networks
• /
• v.16 no.6
• /
• pp.613-619
• /
• 2014

Multicast routing algorithms designed for wireline networks are not suitable for wireless environments since they cannot efficiently exploit the inherent characteristics of wireless networks such as the broadcast advantage. There are many routing protocols trying to use these advantages to decrease the number of required transmissions or increase the reception probability of data (e.g., opportunistic routing).Reducing the number of transmissions in a multicast tree directly decreases the bandwidth consumption and interference and increases the overall throughput of the network. In this paper, we introduce a distributed multicast routing protocol for wireless mesh networks called NCast which take into account the data delivery delay and path length when constructing the tree. Furthermore, it effectively uses wireless broadcast advantage to decrease the number of forwarding nodes dynamically when a new receiver joins the tree.Our simulation results show that NCast improves network throughput, data delivery ratio and data delivery delay in comparison with on demand multicast routing protocol. It is also comparable with multichannel multicast even though it does not use channeling technique which eliminates the interference inherently.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.199-201
• /
• 2003

Ad hoc network은 stationary infrastructure의 도움 없이 이동 노드들이 필요 시 network 형태을 구성하여 통신이 이루어지게 하는 network으로 ad hoc network 환경에 맞는 다양한 라우팅 프로토콜들이 개발되었고 크게는 table­driven, on­demand 방식으로 나눌 수 있는데 on­demand 방식의 AODV 프로토콜은 routing overhead가 적다는 장점이 있는 반면 single path로 data forwarding을 진행하여 중간노드의 이동에 의한 path가 broken되는 경우 local routing을 하거나 새로이 source­initialed route rediscovery을 수행하여 전송 delay 및 control traffic overhead 등을 높이는 결과를 발생 시켰다. 본 논문은 single path로 구성되는 AODV 프로토콜의 route failures시 문제점을 보완한 Associativity Based Redundancy path Routing(ABRR) 및 Alternate Redundancy path Routing(ARR) schemes을 제안한다. 첫째, ABRR은 main path상에 있는 각 노드들은 associativity based stable node 정보를 이용하여 path broken 이전에 local redundancy path을 구성하여 path broken시 local routing없이 route을 복구할 수 있게 하고 둘째, ARR은 source­initialed route discovery에 의해 alternate path을 구성하여 ABRR 그리고 local routing에 의해 main route recovery 실패 시 alternate path을 main path로 전환하여 control traffic overhead 및 전송 delay을 줄이게 한다.

• Journal of Information Processing Systems
• /
• v.8 no.4
• /
• pp.589-602
• /
• 2012

With the increasing demand for real time applications in the Wireless Senor Network (WSN), real time critical events anticipate an efficient quality-of-service (QoS) based routing for data delivery from the network infrastructure. Designing such QoS based routing protocol to meet the reliability and delay guarantee of critical events while preserving the energy efficiency is a challenging task. Considerable research has been focused on developing robust energy efficient QoS based routing protocols. In this paper, we present the state of the research by summarizing the work on QoS based routing protocols that has already been published and by highlighting the QoS issues that are being addressed. The performance comparison of QoS based routing protocols such as SAR, MMSPEED, MCMP, MCBR, and EQSR has also been analyzed using ns-2 for various parameters.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.4
• /
• pp.243-253
• /
• 2010

Multihop data delivery in vehicular ad hoc networks (VANETs) suffers from the fact that vehicles are highly mobile and inter-vehicle links are frequently disconnected. In such networks, for efficient multihop routing of road safety information (e.g. road accident and emergency message) to the area of interest, reliable communication and fast delivery with minimum delay are mandatory. In this paper, we propose a multihop vehicle-to-infrastructure routing protocol named Vertex-Based Predictive Greedy Routing (VPGR), which predicts a sequence of valid vertices (or junctions) from a source vehicle to fixed infrastructure (or a roadside unit) in the area of interest and, then, forwards data to the fixed infrastructure through the sequence of vertices in urban environments. The well known predictive directional greedy routing mechanism is used for data forwarding phase in VPGR. The proposed VPGR leverages the geographic position, velocity, direction and acceleration of vehicles for both the calculation of a sequence of valid vertices and the predictive directional greedy routing. Simulation results show significant performance improvement compared to conventional routing protocols in terms of packet delivery ratio, end-to-end delay and routing overhead.

• Journal of KIISE:Information Networking
• /
• v.36 no.1
• /
• pp.1-11
• /
• 2009

In this paper, we propose a QoS routing protocol for WiMAX based wireless mesh networks. The proposed routing protocol is a proactive hop-by-hop QoS routing protocol. It can find an optimal route that satisfies QoS requirements using bandwidth and delay as QoS parameters. In this paper, we first present a network model for WIMAX based wireless mesh networks and explain why QoS routing protocol is the most appropriate for WiMAX based wireless mesh networks. Then, we propose a proactive hop-by-hop QoS routing protocol that meets QoS requirements of traffic flowing between mesh client and the gateway. The simulation results show that the proposed routing protocol outperforms QOLSR protocol in terms of end-to-end delay, packet delivery ratio and routing overhead.