• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.26-31
• /
• 1995

Acetylcellulose(AC) was prepared with steam exploded wood(EXW) and EXW after delignification with sodium chlorite, pine (Pinus densiflora) and oak (Quercus mongolica) woods. The color of acetylated pine and oak exploded wood was brown, degree of substitution(D.S) of pine was 1.47~2.09, and this of oak was 1.49~2.29. The hemicellulose content of acetylated pine and oak exploded wood was 0~3.4% and 1.49~11.3%, individually. The degree of substitution of acetylated wood prepared from delignified EXW in the pine and oak wood was 0.50~0.71 and 0.70~0.88, individually. Hemicellulose content of acetylated EXW with sodium chlorite after delignification in the pine and oak wood was less than 1% and 0.6~2.5%. The color of acetylated wood after delignification was white. IR-spectra of acetylated pine and oak EXW after delignification were found that peaks at around 1740$cm^{-1}$ and 1200$cm^{-1}$ increase markedly, due to ester carbonyl group.

• Journal of the Korean Wood Science and Technology
• /
• v.20 no.2
• /
• pp.81-90
• /
• 1992

The effect of acid treatment of cellulose on the substitution charateristics of carboxymethylation was studied in this paper. Five samples of hydrocellulose(HC), all prepared from ${\alpha}$-cellulose by hydrolysis with five reaction times and determined on average molecular weight and polydispersity, were carboxymethylated to carboxymethyl cellulose (CMC). The CMCs from HCs were examined upon degree of substitution(DS), distribution of carboxymethyl groups in anhydroglucose units of the cellulose, and unsubstituted anhydroglucose(USAG) content. The DS of CMCs increased with increasing the hydrolysis time except CMC from HC at 1 hour hydrolysis time. In carboxymethylation the availability of hydroxyl groups on anhydroglucose units in HCs was the highest on OH(2), and the relative availability of OH(6) increased with the increasing of the hydrolysis time. The USAG contents were more deviated than that calculated based on Spurlin's model, and had a strong tendency of decreasing with increasing the hydrolysis time. The reactivity of HC was lower than that of ${\alpha}$-cellulose and the relative availability of OH(6) in HC increased with the hydrolysis time.

• Clean Technology
• /
• v.11 no.2
• /
• pp.105-116
• /
• 2005

Carboxymethylcellulose(CMC) which is water soluble at room temperature was manufactured from the cellulose material in this study. Experimental parameters were reaction temperature, time and concentration of NaOH and monochloroacetic acid. CMC was tested for solubility, degree of substitution(D.S.) and tensile strength. The surface structure of CMC fiber was tested using scanning electron microscope(SEM). CMC manufactured from viscose rayon was affected by the chemical concentration rather then the reaction time and temperature. Also, degree of substitution is closely related to the solubility of the CMC.

• Journal of Korea Trade
• /
• v.25 no.5
• /
• pp.110-128
• /
• 2021

Purpose - The essential purpose of this study is to analyze the possibility of substitution of an individual job resulting from technological development represented by the 4th Industrial Resolution, considering the different effects of digital transformation on the labor market. Design/methodology - In order to estimate the substitution probability, this study used two data sets which the job characteristics data for individual occupations provided by KEIS and the information on occupational status of substitution provided by Frey and Osborne(2013). In total, 665 occupations were considered in this study. Of these, 80 occupations had data with labels of substitution status. The primary goal of estimation was to predict the degree of substitution for 607 of 665 occupations (excluding 58 with markers). It utilized three methods a principal component analysis, an unsupervised learning methodology of machine learning, and Ridge and Lasso from supervised learning methodology. After extracting significant variables based on the three methods, this study carried out logistics regression to estimate the probability of substitution for each occupation. Findings - The probability of substitution for other occupational groups did not significantly vary across individual models, and the rank order of the probabilities across occupational groups were similar across models. The mean of three methods of substitution probability was analyzed to be 45.3%. The highest value was obtained using the PCA method, and the lowest value was derived from the LASSO method. The average substitution probability of the trading industry was 45.1%, very similar to the overall average. Originality/value - This study has a significance in that it estimates the job substitution probability using various machine learning methods. The results of substitution probability estimation were compared by industry sector. In addition, This study attempts to compare between trade business and industry sector.

• Proceedings of the Korean Fiber Society Conference
• /
• 1996.10a
• /
• pp.48-52
• /
• 1996

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.4
• /
• pp.428-433
• /
• 2009

Cellulose triacetate (CTA) was prepared from cotton linter and pulps which contain various contents of $\alpha$-cellulose. CTA which contains 2.8 of degree of substitution (DS) and 222 of degree of polymerization (DP) was obtained from V-81 pulp under the heterogeneous system. The DS was measured by the titration method, and the DP was obtained by measurement of viscosity. FT-IR spectometer (FT-IR 6300, JASCO) was used to analyze the chemical structure of raw materials and cellulose triacetate, and X-ray diffractometer (X-pert MPD PW3040, Philips) was used to confirm the crystal structure and to calculate the relative crystallinity index (RCI). As $\alpha$-cellulose content in pulp increased, the acetylation yield increased. Besides with a kind of pulp, it contains insoluble residue which was mainly formed due to the formation of glucomannan triacetate and xylan diacetate during the esterification.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.5
• /
• pp.1-7
• /
• 2009

Oxidized acetate starch was synthesized from corn oxidized starch and vinyl acetate. The sizing concentration and degree of substitution of modified starch on surface strength, smoothness and water resistance of the paper have been studied. The results showed that the surface strength, smoothness and other properties of paper sized by oxidized acetate starch is better than that of oxidized starch. When the degree of substitution of modified starch is from 0.04 to 0.14, the properties of paper sized by oxidized acetate starch have been improved more effectively.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.651-658
• /
• 1990

Starch phosphates were prepared by dry heating, gelatinizing method and extrusion process using sodium tripolyphosphote (STPP) as a substitution reagent and their physicochemical properities were compared. In the preparation of starch phosphate by dry heating method(DSP), the effect of reaction temperature was the most significant to the DS(Degree of substitution). In the phosphorylation reaction with gelatinized starch(GSP), the substitution ratio was increased with increasing the reaction temperature, but the increase was insignificant above $85^{\circ}C$. By extrusion with the corn starch containing 2.0% STPP at various moisture contents of 20, 25 and 30%, the DS values of extrudate(WESP) were within the range of between 0.0066 and 0.0083. The starch phosphate(DSP) products showed lowering the gelatinization temperature, increasing the clarity of the starch paste. However, WESP showed higher gelatinization temperature than that of raw starch. The starch phosphate prepared by extrusion process showed lower apparent viscosity of paste than that of the DSP at same condition. All of starch phosphates showed reducing the tendency of the paste retrogradation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.4
• /
• pp.487-492
• /
• 2006

Acetylated rice starches were prepared by reaction of rice starch with acetic anhydride, and their physicochemical properties as a function of degree of substitution (DS) were evaluated. The percentage of acetyl group and DS were $0{\sim}2.71%\;and\;0{\sim}0.104$, respectively. DS increased with increase in acetic anhydride content. DS increased swelling power and solubility of rice starch. Light transmittance (%) values of acetylated rice starches were much higher than that of native rice starch and increased with increase in DS. Rapid Visco Analyzer initial pasting temperature of acetylated rice starches decreased with increase in DS, while peak viscosity and breakdown values increased. Starch gets showed a significant decrease in syneresis (%) with the increase in DS.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.386-389
• /
• 1999

Amphoteric polymers have brought to papermakers' attention gradually. In this paper, a series of amphoteric starches with different cationic and anionic degree of substitution (DS) are prepared. Better product has been selected and used under different condition. As retention and drainage aids, amphoteric starches were used in shorter fiber length, weak strength and poor drainage bleached AQ-Soda wheat straw pulp. In neutral and alkaline papermaking system, when amphoteric starches contain 0.024-0.026 anionic degree of substitution (DS), it is shown that the higher the cationic degree of substitution (DS) in amphoteric starches, the better the filler retention. The filler retention is improved 12.5%, 30.3%, and 35.1% and 32.5% respectively by adding 1% amphoteric starch LS-L2 -1 (0.034), LS-L2-2 (0.040), LS-L2-3 (0.047) and LS-L2-4 (0.052). But the strength of handsheets if affected a little. By adding 2% Al2 (SO4)3 and 1.5% LS-L2-3 at pH 7.5, filler retention can be improved from 38% to 80%, and breaking length of sheet only decreases 3.2%. As dry strengthening aids, amphoteric starches were used in eucalyptus APMP. Amphoteric starches are used in eucalyptus APMP. The amphoteric starch LS-L2-2 is better dry strength aid. Adding 1% LS-L2-2 can improve breaking length 24.5%, burst index 42.9%, tear index 38.8%, folding endurance and density of the handsheets.