This study was activity of ${\alpha}-amylase$, glucoamylase of liquid Nuruk prepared using liquid Nuruk (NK) and Aspergillus kawachii (AK), Aspergillus niger (AN), Aspergillus oryzae (AO), Monascus kaoliang (MK). To investigate the relationship between the enzymatic activity and the total sugar content of liquid Nuruk depending on the types of Nuruk molds and the degree of rice-polishing. The activity of ${\alpha}-amylase$ depending on the types of Nuruk molds was shown to be 8.82, 8.72 units/mL in AN and AK treatments in brown rice liquid Nuruk at 24 hours after incubation, as the degree of rice-polishing increased, the activity of ${\alpha}-amylase$ was significantly lower (p<0.05). When brown rice was incubated in AN, it showed 8.83 units/mL at 48 hours after incubation, which was the highest activity, but there was no significantly difference (p<0.05), as the degree of rice- polishing was higher, the activity of ${\alpha}-amylase$ was lower. The activity of glucoamylase depending on the degree of rice-polishing showed 3,013 units/mL in AO treatment in brown rice liquid Nuruk at 24 hours after incubation, and the enzymatic activity was significantly higher (p<0.05). As the degree of rice-polishing increased, the activity of glucoamylase decreased, so liquid brown rice Nuruk showed the highest enzymatic activity, liquid white rice Nuruk was the lowest enzymatic activity. The highest enzymatic activity appeared in liquid Nuruk with brown rice at 48 hours after incubation. The activity of ${\alpha}-amylase$, glucoamylase showed higher enzymatic productivity as the degree of rice-polishing was lower, and there was an inverse correlation with the total sugar content.
In this study, laser-induced breakdown spectroscopy (LIBS) was used to estimate the degree of rice polishing. As-threshed rice seeds were dehusked and polished for different times, and the resulting grains were analyzed using LIBS. Various atomic, ionic, and molecular emissions were identified in the LIBS spectra. Their correlation with the amount of polished-off matter was investigated. Na I and Rb I emission line intensities showed linear sensitivity in the widest range of polished-off-matter amount. Thus, univariate models based on those lines were developed to predict the weight percent of polished-off matter and showed 3-5 % accuracy performances. Partial least squares-regression (PLS-R) was also applied to develop a multivariate model using Si I, Mg I, Ca I, Na I, K I, and Rb I emission lines. It outperformed the univariate models in prediction accuracy (2 %). Our results suggest that LIBS can be a reliable tool for authenticating the degree of rice polishing, which is closed related to nutrition, shelf life, appearance, and commercial value of rice products.
추청벼 등 4품종의 현미를 4.0, 6.4, 8.0, 9.6, $12.0\%$로 도정하여 벼의 도정율과 미강 중의 tocooienol 및 tocopherol 그리고 vitamin I 함량과의 관계를 구명하고자 본 시험을 수행한 결과는 다음과 같다. 1. 미강의 tocotrienol 함량이 최대가 되는 도정율은 4품종 각각 다른 반응을 보였으나 공통으로 가장 높았던 도정율은 6.4\%$이었고 추청벼와 안다벼는 도정율 $8.0\%$에서도 유의차가 없었다. 2. 미강의 tocopherol 함량은 4품종 모두 도정율 $8.0\%$에서 가장 높게 나타났으며, 일품벼 고시히카리 안다벼 3품종은 $9.6\%$에서도 유의차가 없었다. 3. 미강의 vitamin E함량이 가장 높은 도정율은 $8.0\%$이나 실험 품종들 간에 다소 차이는 있으나 대체로 $6.4-9.6\%$의 도정율에서는 유의차가 없었다. 4. 쌀의 tocotrienol, tocopherol 그리고 vitamin E함량은 도정율이 높아질수록 감소되는 경향으로 도정율 $8\%$일때 각각의 함량은 11.0, 8.2, $19.2 mg{\cdot}kg^{-1}$이었고, 쌀에는 tocotrienol과 tocopherol 동족체 중 $\alpha-$와 $\gamma-$가 검출되었다.
Degree of polished rice so called 70 percentage of polished rice sold at the 19 places of rice dealer's store in Gwang - Ju city were surveyed through the New M.G.color reaction reagent, from 24th to 30th of January, 1975. The results were as follows ; 1. Nearly the 70 percentage polished rice sold at the rice dealer's store showed some differences in the degree of polishing of rice, with respect to color reaction in comparison with standard 70 percentage polished rice. 2. There have been no rice which are over excessive 70 percentage polished rice. 3. The place were more than 90 percentage of 70percentage polished rice amount, were 3 places in the 19 places rice dealer's store and 50 percentage of below 70 percentage polished rice amount were 8 places in the 19 places.
In order to develop a new variety of rice that adapts to the climate of Aomori prefecture and possesses characteristics suitable for production of high quality Japanese sake, artificial cross experiments were executed between Yamadanishiki, which is widely used nationwide as an authentic variety of rice for sake production, and Hanafubuki, which was peviously developed by Aomori prefecture. An excellent hybrid, named Hanaomoi, was selected and fixed by a series of selection experiments and systematic cultivation. Unpolished Hanaomoi rice contained less amount of protein than Yamadanishiki and Hanafubuki. Unpolished rice of Hanaomoi was harder than Yamadanishiri and Hanafubuki, therefore polishing treatment was done in high yield and one could obtain a high degree of polish on the rice(namely 40% polishing). These features are advantageous to production of high quality of sake.Test brewing using 40% polished Hanaomoi gave rise to a characteristic sake that contained a slightly higher amount of alcohol and flavor components than Yamadanishiki and Hanafubuki. Sensory tests concluded that sake from Hanaomoi was as superior as the one from authentic Yamadanishiki. Hanaomoi is a promising variety of rice suitable for production of a high quality sake exclusive to Aomori prefecture.
1. ${\alpha}$화 보리쌀의 끓는 물중에서의 수분흡수율은 호화도의 증가에 따라 증가하는 경향이며, 열탕처리구에서 현저하게 증가하고 가압솥처리구에서 가장 낮았으나 모두 무처리구 보다는 증가하였다. 2. ${\alpha}$화 보리쌀로 취반하고 그의 물성을 측정한 결과, 경도는 정백도가 높을수록 낮았으며, 가압솥 처리구가 가장 낮았고, 무처리구는 모두 높았다. 3. ${\alpha}$화 보리쌀 20%와 쌀 80%로 혼합취반하여 관능 검사한 결과 질감은 S-60에서 현저히 높았고 색깔에서는 모든 ${\alpha}$화 시료가 낮게 평가되었으나 총점에서는 무처리구와 유의적인 차이가 없었다.
국내에서 생산되는 현미겨는 약 8.4~14.7 wt %의 지질을 포함하고 있으나 지방산의 양이나 조성은 현미겨의 형태, 토질 상태, 도정과 같은 전처리나 정미도에 영향을 받는다. 현미겨에 포함되어 있는 지질은 보통 palmitic acid, linolenic acid, linoleic acid, oleic acid, stearic acid, tocopherol, squalene 등과 같은 지방산으로 나눌 수 있다. 본 연구에서는 초임계유체를 이용하여 현미겨에서 squalene을 함유한 지방산을 추출하였으며, 각각의 공정에 ethanol을 첨가하여 초임계유체 추출을 시행하였다. 추출물은 GC-MSD로 분석을 하였고, 추출된 현미유의 양은 공정 온도, 압력에 따라 달랐으며, 조성은 초임계 이산화탄소의 환산밀도 (${\rho}_{\gamma}$ reduced density)에 영향을 받았다. 4시간의 공정시간에 약 70~80%의 현미유가 추출되었으며, ethanol을 첨가한 초임계유체 추출은 일반 초임계유체 추출에 비해 추출시간이 단축되며 동시에 추출량이 증가됨을 알 수 있었다. 또한 용매추출 공정에서 검출되지 않았던 squalene이 초임계유체 추출과 ethanol올 첨가한 초임계유체 추출에서 추출됨이 확인되었다.
본 실험은 청청과 낙동 조합을 약배양하여 육성한 120 계통을 이용하여 식미치 관련 알칼리붕괴도에 대한 QTLs를 분석하고 탐색된 QTLs 유전자에 위치한 DNA 마카를 선발하여 기존 품종에 적용하여 다음과 같은 결과를 얻었다. CNDH 계통을 이용하여 알칼리붕괴도 변이를 조사한 결과 통일형 품종인 청청과 자포니카형 품종인 낙동 현미는 각각 1.9, 1.6를 보였으며 CNDH 계통은 $3.79{\pm}2.01$를 보였으며 변이 분포는 7.0-1.0까지 분포하였다. 모부본인 청청과 낙동 백미는 각각 5.6, 4.1를 보였으며 CNDH 집단의 평균은 $4.86{\pm}1.55$ 보였으며, 변이 분포는 7.0-2.0까지 분포하였다. 변이 분포 곡선은 비정규분포에 가까운 연속변이를 나타내었다. QTLs 분석에서 현미 1,2 반복에서 qBRA2, qBRA6, qBRA11, 백미 1반복에서 qHRA2-1, qHRA2-2, qHRA2-3, qHRA3, qHRA8, 2반복에서 qHRA2-1, qHRA2-2, qHRA2-3, qHRA3, 4반복에서 qHRA5으로, 이들은 각각 2번, 3번, 6번, 8번, 11번 염색체상에 탐색되었다. 현미, 백미 각 염색체상의 qBRA2, qBRA6, qBRA11의 표현형 변이는 1-9% 분포되었다. 알칼리붕괴도 관련 QTLs 분석 결과에서 탐색된 9개 marker를 토대로 모부본인 청청, 낙동을 기준으로 자포니카형 12품종, 인디카형 6품종에 다형성을 분석하였다. 밴드양상으로 크기에 차이를 보이는 분리비에 적합한 11번 염색체 RM27258을 선발하였다. 이상의 연구결과는 앞으로 미질이 좋은 벼 품종 개발하는데 기초자료로 이용 될 것 이다.
In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.
이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.