• Culinary science and hospitality research
• /
• v.23 no.1
• /
• pp.95-102
• /
• 2017

This study was activity of ${\alpha}-amylase$, glucoamylase of liquid Nuruk prepared using liquid Nuruk (NK) and Aspergillus kawachii (AK), Aspergillus niger (AN), Aspergillus oryzae (AO), Monascus kaoliang (MK). To investigate the relationship between the enzymatic activity and the total sugar content of liquid Nuruk depending on the types of Nuruk molds and the degree of rice-polishing. The activity of ${\alpha}-amylase$ depending on the types of Nuruk molds was shown to be 8.82, 8.72 units/mL in AN and AK treatments in brown rice liquid Nuruk at 24 hours after incubation, as the degree of rice-polishing increased, the activity of ${\alpha}-amylase$ was significantly lower (p<0.05). When brown rice was incubated in AN, it showed 8.83 units/mL at 48 hours after incubation, which was the highest activity, but there was no significantly difference (p<0.05), as the degree of rice- polishing was higher, the activity of ${\alpha}-amylase$ was lower. The activity of glucoamylase depending on the degree of rice-polishing showed 3,013 units/mL in AO treatment in brown rice liquid Nuruk at 24 hours after incubation, and the enzymatic activity was significantly higher (p<0.05). As the degree of rice-polishing increased, the activity of glucoamylase decreased, so liquid brown rice Nuruk showed the highest enzymatic activity, liquid white rice Nuruk was the lowest enzymatic activity. The highest enzymatic activity appeared in liquid Nuruk with brown rice at 48 hours after incubation. The activity of ${\alpha}-amylase$, glucoamylase showed higher enzymatic productivity as the degree of rice-polishing was lower, and there was an inverse correlation with the total sugar content.

• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.959-964
• /
• 1996

The physicochemical and gelatinization properties of rice flours, which were prepared by polishing nonwaxy brown rice (Dongjin byeo), depending on polishing degrees were investigated. The contents of protein, ash, lipid and fiber decreased significantly as the degrees of polishing increased and water uptake of rice grains decreased during hydration. When the surface of the soaked rice grains was examined by the SEM, extensive crack formation was observed. The water binding capacities, swelling power and solubility of rice flour increased as the polishing degree increased. By the amylogram, the initial gelatinization temperatures of rice flour decreased as the polishing degree increased and the peak viscosities, the breakdown and consistency of rice flour increased as the polishing degree increased.

• Analytical Science and Technology
• /
• v.37 no.1
• /
• pp.12-24
• /
• 2024

In this study, laser-induced breakdown spectroscopy (LIBS) was used to estimate the degree of rice polishing. As-threshed rice seeds were dehusked and polished for different times, and the resulting grains were analyzed using LIBS. Various atomic, ionic, and molecular emissions were identified in the LIBS spectra. Their correlation with the amount of polished-off matter was investigated. Na I and Rb I emission line intensities showed linear sensitivity in the widest range of polished-off-matter amount. Thus, univariate models based on those lines were developed to predict the weight percent of polished-off matter and showed 3-5 % accuracy performances. Partial least squares-regression (PLS-R) was also applied to develop a multivariate model using Si I, Mg I, Ca I, Na I, K I, and Rb I emission lines. It outperformed the univariate models in prediction accuracy (2 %). Our results suggest that LIBS can be a reliable tool for authenticating the degree of rice polishing, which is closed related to nutrition, shelf life, appearance, and commercial value of rice products.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.6
• /
• pp.468-471
• /
• 2004

Tocotrienol $(T_3)$ and tocopherol (T) are well-known antioxidant vitamin E isomers that are enriched in rice bran, most of which is removed during polishing process. To verify the polishing-dependent fractional content of tocotrienol and tocopherol, harvested brown rice of 4 cultivars were polished by 4.0, 6.4, 8.0, 9.6, and $12\%$ (w/w) and resultant bran powder and rice were used for $T_3$ and T analysis. Polishing degree affected bran $T_3$ content in that bran polished by $6.4\%$ exhibited highest $T_3$ content compared to other polishing degrees except in cv. Chucheongbyeo which showed similar $T_3$ content from 4.0 to $8.0\%$ polishing. In case of tocopherol, bran polished by $8.0\%$ exhibited highest T content in all tested cultivars. In general, $T_3$ distributed in higher quantity in exterior i.e., in less polished bran, while T showed relatively less decrease with enhanced polishing degree. Consequently, total vitamin E content in bran as calculated by the summation of $T_3$ and T became less dependent on polishing degree in that bran polished between 6.4 to $9.6\%$ exhibited no statistical differences. The rice of cv. Chuchongbyeo, remained after polishing, exhibited similar vitamin E content up to $6.4\%$ polishing, above which significant vit E loss could be observed. These results suggest that polishing less than $6.4\%$ is desirable to minimize the loss of tocotrienols and tocopherols during polishing.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.4 no.1
• /
• pp.97-100
• /
• 1975

Degree of polished rice so called 70 percentage of polished rice sold at the 19 places of rice dealer's store in Gwang - Ju city were surveyed through the New M.G.color reaction reagent, from 24th to 30th of January, 1975. The results were as follows ; 1. Nearly the 70 percentage polished rice sold at the rice dealer's store showed some differences in the degree of polishing of rice, with respect to color reaction in comparison with standard 70 percentage polished rice. 2. There have been no rice which are over excessive 70 percentage polished rice. 3. The place were more than 90 percentage of 70percentage polished rice amount, were 3 places in the 19 places rice dealer's store and 50 percentage of below 70 percentage polished rice amount were 8 places in the 19 places.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.46-50
• /
• 2003

In order to develop a new variety of rice that adapts to the climate of Aomori prefecture and possesses characteristics suitable for production of high quality Japanese sake, artificial cross experiments were executed between Yamadanishiki, which is widely used nationwide as an authentic variety of rice for sake production, and Hanafubuki, which was peviously developed by Aomori prefecture. An excellent hybrid, named Hanaomoi, was selected and fixed by a series of selection experiments and systematic cultivation. Unpolished Hanaomoi rice contained less amount of protein than Yamadanishiki and Hanafubuki. Unpolished rice of Hanaomoi was harder than Yamadanishiri and Hanafubuki, therefore polishing treatment was done in high yield and one could obtain a high degree of polish on the rice(namely 40% polishing). These features are advantageous to production of high quality of sake.Test brewing using 40% polished Hanaomoi gave rise to a characteristic sake that contained a slightly higher amount of alcohol and flavor components than Yamadanishiki and Hanafubuki. Sensory tests concluded that sake from Hanaomoi was as superior as the one from authentic Yamadanishiki. Hanaomoi is a promising variety of rice suitable for production of a high quality sake exclusive to Aomori prefecture.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.160-163
• /
• 1983

Alpha-barleys prepared by boiling had the highest water absorption and those prepared by autoclaving showed the lowest water absorption among all the treatments, but all of ${\alpha}-barleys$ were higher than untreated barleys. The values of hardness on cooked ${\alpha}-barleys$ decreased as the degree of polishing increased, and untreated burleys showed the higher values than ${\alpha}-barleys$. There were no significant difference in total scores of sensory evaluation between ${\alpha}-barley-rice$ mixtures and untreated barley-rice mixtures after cooking.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.438-444
• /
• 1999

The natural full-fat rice bran is reported to contain 8.4 to 14.7 wt % Lipids, but the amount and composition of bran depend on the type of rice, quality of paddy, pretreatments to paddy such as parboiling, type of milling system employed, and the degree of polishing. These lipids are usually mixtures of several class fatty acids containing palmitic acid, linolenic acid, linoleic acid, oleic acid, stearic acid, tocopherol, squalene, etc. In this study the oil rich essential fatty acid (EFA) including squalene was extracted from the domestic brown rice bran using supercritical fluid extraction (SFE) and cosolvent induced SFE process, respectively. And the extracts were analyzed with GC-MSD. The extracted amount of rice bran oil was dependent upon the operating pressure and temperature, and the fatty acid composition of oil was varied with the reduced density (${\rho}_{\gamma}$) of supercritical carbon dioxide. About 70~80% of rice bran oil was extracted in 4hrs. The cosolvent induced SFE process shortened the total extraction time, extracted greater amount of oil than SFE process. Especially squalene which was not found in solvent extract phase was identified in SFE and cosolvent induced SFE process.

• Journal of Life Science
• /
• v.28 no.3
• /
• pp.314-319
• /
• 2018

We analyzed QTLs for alkali-related digestion by using 120 population crossed Cheongcheong and Nagdong derived from anther culture (CNDH). The DNA markers located in the QTLs gene were selected and applied to existing cultivars. As a result of the investigation of the alkali decay degree, brown rice of Cheongcheong and Nagdong was 1.9 and 1.6, respectively, and the CNDH was $3.79{\pm}2.01$, and the distribution of variance was distributed to 7.0-1.0. The milled rice of Cheongcheong and Nagdong was 5.6 and 4.1, respectively. The mean of the CNDH was $4.86{\pm}1.55$, and the distribution of variance was distributed to 7.0-2.0. Variation distribution curves showed continuous variation that was close to non-normal distribution. In the QTLs analysis, qBRA2, qBRA6, and qBRA11 were mapped in 1-2 replications of brown rice. QHRA2-1, qHRA2-2, qHRA2-3, qHRA3, and qHRA8 were mapped in the first replication. QHRA2-1, qHRA2-2, qHRA2-3 and qHRA3 were mapped in the second replicates. And mapped to qHRA5 in 4 replicates. These were found on chromosome 2, 3, 6, 8 and 11, respectively. The phenotypic variations of qBRA2, qBRA6, and qBRA11 on the chromosomes of brown and milled rice were 1-9%. The polymorphism was analyzed for 12 types of the japonica type and six types of the indica type, based on the nine markers found in the QTLs analysis of alkali digestion. Chromosome 11, RM27258, was selected to determine the segregation ratio, which shows the difference in size by the band pattern. The results of this study will be used as basic data for the development of high-quality rice cultivars.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.