• 한국해양공학회지
• /
• 제32권6호
• /
• pp.433-439
• /
• 2018

An investigation was conducted to determine whether the changes in the maneuvering forces and moments acting on a hull could be affected by changing the vertical center of gravity (VCG) of a tanker. The changes in the hydrodynamic forces and moment acting on a hull according to the restraint conditions of motion were examined using CFD for cases where the VCG was located at the design draught (100% of draught), under the design draught (75% of draught), and at half of the design draught (50% of draught). The following motion restraint conditions were selected: (1) fixed restraints for everything; (2) heave, pitch, and roll free restraint; and (3) heave and pitch free restraints. It was found that restraint condition (2) had the best agreement with the model experiment results. In addition, it was found that the hydrodynamic forces and moment acting on the hull with restraint condition (2) could be greatly affected in the model tests and CFD calculations by the various configurations for the vertical center of gravity of the hull. Finally, it was concluded that the location of the vertical center of gravity of the hull could be an important factor when more accurate hydrodynamic maneuvering forces and moment are estimated.

• 대한인간공학회지
• /
• 제17권3호
• /
• pp.1-11
• /
• 1998

Focuses of this study are to investigate the usage status of head-restraint system(H/R) in usual driving and to simulate usage conditions of H/R at rear-end crashes. The usage of H/R was categorized into five classes according to the height and distance from occupant's head ; Large-$90^{\circ}$ H/R for enough height and short distance. Large-$70^{\circ}$ H/R for enough height and long distance. Small-$90^{\circ}$ H/R for low height and short distance. Small-$70^{\circ}$ H/R for low height and long distance. and No H/R. Then. these five conditions were tested to find out the degree of neck injuries by using a car-crash simulation package, DYNAMAN. Results from the investigation of H/R usage show that most of drivers(60%) have Small-$70^{\circ}$ H/R for low height and long distance. Results from the simulation performed at 15mph and 30mph show that: 1) at 15 mph, there is a possibility for neck injury in Small-$90^{\circ}$ H/R and Small-$70^{\circ}$ H/R. 2) at 30 mph. there is a high possibility of death in Small-$70^{\circ}$ H/R and Small-$90^{\circ}$ H/R.

• 대한조선학회논문집
• /
• 제37권2호
• /
• pp.127-136
• /
• 2000

선박 건조 시 발생하는 용접변형은 블록의 정도를 떨어뜨리고 교정작업으로 인한 생산성 저하의 요인이 되고 있다. 따라서 설계 단계에서 변형을 최소화 할 수 있는 작업기준을 마련한다면 생산성 증대는 물론 품질의 향상을 가져올 수 있을 것이다. 여기에는 먼저 블록의 조립과정에 따른 변형을 예측할 수 있는 정확하고 효율적인 방법이 마련되어야 한다. 본 논문에서는 고유변형도 이론과 유한요소 해석을 결합한 효율적인 변형예측 기법을 제안하였다. 고유변형도는 간이 열탄소성 해석 결과 최고온도 분포와 구속도에 의해 결정된다. 따라서 용접 열전도 해석과 구조물의 조립과정에 따른 구속도 계산을 수행하여 실제 구조물에 발생하는 고유변형도를 정확히 구하고자 하였다. 이를 이용하여 보강판의 변형 예측을 구현하였고 간단한 선체 블록에 적용할 수 있음을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제4권4호
• /
• pp.383-396
• /
• 1996

In this paper, the behavior of plates partially restrained against rotation under stress gradient is investigated. As a first stage, an energy formulation is presented to model this boundary condition and a general expression is derived for the prediction of the elastic buckling of the plate under this general loading condition. The accuracy of the derived expression is compared numerically using the Galerkin method with other available data for the two limiting conditions of rotationally free and clamped boundaries. Results show that the prediction is within a 5% difference. The influence of rotational restraint and stress gradient upon the buckling load and the associated buckling mode is investigated. Numerical results show sensitivity of the buckling mode to the degree of rotational restraint and the variation of the buckling load with the stress gradient.

• Steel and Composite Structures
• /
• 제41권5호
• /
• pp.625-636
• /
• 2021

This paper examines the fire performance of uninsulated and uncoated restrained steel-concrete composite beams supplemented with externally prestressed strands through advanced numerical simulation. In this work, a sequentially coupled thermo-mechanical analysis is carried out using ABAQUS. This analysis utilizes a highly nonlinear three-dimensional finite element (FE) model that is specifically developed and validated using full-sized specimens tested in a companion fire testing program. The developed FE model accounts for nonlinearities arising from geometric features and material properties, as well as complexities resulting from prestressing systems, fire conditions, and mechanical loadings. Four factors are of interest to this work including effect of restraints (axial vs. rotational), degree of stiffness of restraints, the configuration of external prestressed tendons, and magnitude of applied loading. The outcome of this analysis demonstrates how the prestressing force in the external tendons is primarily governed by the magnitude of applied loading and experienced temperature level. Interestingly, these results also show that the stiffness of axial restraints has a minor influence on the failure of restrained and prestressed steel-concrete composite beams. When the axial restraint ratio does not exceed 0.5, the critical deflection of the composite beam is lower than that of the composite beam with a restraint ratio of 1.0.

• 한방비만학회지
• /
• 제18권2호
• /
• pp.115-127
• /
• 2018

Objectives: People often fail to reduce or maintain their weight despite trying to lose weight. The purpose of this study was to review previously published study results of the predictive factors associated with weight loss in obesity treatment. Methods: Authors searched for the articles related to weight loss, published from 2007 to 2017 found on PubMed, Scopus, Research Information Sharing Service (RISS), and Koreanstudies Information Service System (KISS). A total of 43 articles were finally selected. From the study results, unchangeable and changeable predictors were extracted, and these predictors were examined according to detailed categories. Results: Predictors of weight loss in obesity treatment included genetic and physiological factors, demographic factors, history of treatment on obesity related factors, behavioral factors, psychological factors and treatment process related factors. The main factors of weight loss were unchangeable predictors such as high initial degree of obesity and younger age, and changeable predictors such as dietary restraint, regular exercise, self-efficacy, initial weight loss and attendance. Especially dietary restraint, regular exercise, successful initial weight loss and high attendance were considered to be dominant factors for weight loss treatments. Conclusions: Our review results suggest that unchangeable and changeable predictors of weight loss should be carefully examined during treatments of obesity.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.61-61
• /
• 2010

The purpose of this study is to prevent the unstable fracture at the FCA butt weldment of hatch coaming deck in the ultra large containership during service life. In order to do it, the behavior of the embedded crack at the weldment under design loading conditions was evaluated in accordance with BS7910. Here, the level of primary stress induced by ship motion was evaluated by the design code of classification society and FEA. The level of residual stress as secondary stress was calculated in consideration of the restraint degree of weldment and welding heat input by using the predictive equation proposed by authors in the previous study. The fatigue crack growth rate at the weldment was evaluated using CT specimen in accordance with ASTM E647. According to the results, although the allowable defect for embedded crack specified in the classification society exists at the weldment, the occurrence possibility of unstable fracture at the weldment could not be negligible, regardless of CTOD value given in this study. So, in this study, the effect of initial defect size, welding heat input, restraint degree and CTOD on the fracture mechanical characteristics of embedded crack at the weldment was evaluated by the comprehensive fracture assessment. Based on the results, the design criteria including allowable defect, residual stress level and CTOD value was established to prevent the unstable fracture at the FCA butt weldment of hatch coaming deck in an ultra large containership during service life of 20years.

• 대한본초학회지
• /
• 제21권2호
• /
• pp.63-75
• /
• 2006

Objectives : We investigated the effects of Liriopis Tuber on the nervous protection. Methods : We measured the reaction behavior with EPM(Elevated Plus Maxe) and MWM(Morris Water Maze) after applying restraint stress to rats. Also, the degrees of AchE generation were measured with immunohistochemical method in the regions of hippocampus, and the degree of TH generation in the regions of VTA and LC, respectively. Results : 1. As the results of measuring how long EPM which reflects anxiety reaction stayed in the open arm, there was the trend which can suppress anxiety reaction in the MMD+stress group(Liriopis Tuber+stress) but no statistical significance. The counting results how many EPM passed between opened and closed arm showed suppression trend against a physical activity in the saline+stress group but there was no statistical significance. 2. According to the result of MWM, the saline+stress group showed the learning retardation which means increased time arriving at goal compared to ti1e normal group at the second and third day of measurement. On the contrary, a learning retardation was significantly decreased in the MMD+stress group. Among the probe trial test a memory loss occurred in the saline+stress group, meanwhile memory ability was notably increased in the saline-stress group. 3. The degree of TH generation was investigated at the VTA and LC respectively after test animals treated with drug. In the saline+stress group, TH-immunoreactive cells were significantly increased, and these stress-induced TH increases were suppressed in the saline+stress group at the VTA region. However, the saline+stress group did not show any significant difference. 4. the degree of AchE generation was investigated at the CA3 of hippocampus. The saline+stress group showed that AchE-immunoreactive cells were significantly decreased. Those stress-induced reductions of AchE cells were meaningfully recovered in the saline+stress group. Although the cells showed recovery trend in the region of CA1 of hippocampus, statistical significance was not observed. Conclusion : The results of our study indicate that Liriopis Tuber can improve spatial memory ability of rats applied a restraint stress. This improvement of the spatial memory ability is considered to have an efficacy of nervous protection that Liriopis Tuber suppresses the generation of AchE in the hippocampus region and enhances the generation of TH in the VTA.

• 한국간호교육학회지
• /
• 제15권1호
• /
• pp.62-71
• /
• 2009

Purpose: The present study was performed to identify the perception, attitude, and knowledge regarding the use of physical restraints among nursing personnel working at long-term care facilities. Method: 289 nurses, nurse aids and private caregivers working at 13 wards from 7 facilities participated in the survey. Perception, attitude and knowledge regarding the use of physical restraints were evaluated using the Perceptions of Restraints Use Questionnaire developed by Evans and Strumpf(1993) and Physical Restraint Questionnaire suggested by Janelli, et al(2006). Results: Wrist restraints were used the most frequently. The perception score regarding the use of physical restraints was 3.35, which is a moderate value. Study respondents considered 'safety measure' and 'safe use of a medical device' as the most important aspects when applying physical restraints to elderly. The respondents reported physical restraints were therapeutic at least to some degree but knowledge level about physical restraints of the respondents was rather low. Conclusion: Perception and attitude toward physical restraints were identified. The lack in knowledge about physical restraints needs to be addressed for more efficient use of them.

• 한국의류학회지
• /
• 제18권3호
• /
• pp.387-394
• /
• 1994

Journal of the Korean Society of Clothing and Textiles Vol. 18, No. 3 (1994) p. 387∼394 In this study, the restriction of slacks (blue jean) versus box pleats skirt was investigated, from the view point of peripheral blood flow at the toe according to motion variation and E.M.G. analysis of leg muscles after walking on the flat or going up and down stairways. Besides, the pressure of slacks on the lower extrimity was measured statically and dynamically. The main results were summerized as follows; 1. The clothing pressure applied by slacks was; each one of thigh and lower leg was 18.2 g/ cm2 and 22.1 g/cm2 in upright, 63.4 g/cm2 and 26.6 g/cm2 in sitting on the chair, on both sides of thigh and lower leg 272.0 g/cm2 over in squatting. 2. When the motion starts from upright, the dynamic clothing pressure reach their peak before the motions end. When the motion ends and the body comes to a still condition, the clothing pressure grow lower and indicate a constant value. but when the body starts moving again to return to upright, the pressures once grow higher and go to zero value after reaching the peak. The pressure on the knee show much greater than those on the hip. This can be because these pressures depend on the degree of skin stretching motion and of its curvature. 3. The surface E.M.G. in leg muscles M. rectus femoris and M. gastrocnemius were recoreded. In the case of wearing slacks, two muscles were activated much more than wearing skirt. 4. The peripheral blood flow at the toe by wearing slacks was lower than wearing skirt. Also the case when squatting, the peripheral blood flow at the toe was low.