• Fashion & Textile Research Journal
• /
• v.5 no.1
• /
• pp.71-76
• /
• 2003

Three different types of chitosan were prepared from red crab shells to study anti-microbial activity of chitosan on pathogenic bacteria, MRSA(Methicillin-resistant. Staphylococcus aureus), Water-insoluble chitosan, whose degree of deacetylation is kept over 90% and molecular weights are 20,000, 500,000, 150,000, 80,000, and 40,000, respectively. Water-soluble chitosan, whose degree of deacetylation is about 48% and molecular weights are 200,000 and 80,000. Water-soluble chitosan, whose degree of deacetylation is 82% and molecular weight is 3,900. The anti-microbial activities of three types of chitosan were investigated by Tube Dilution Technique(TDT) and Agar Plate Smear Method(APSM). And the following conclusions are made ; Chitosan having 5 different types of M.W chitosan (over 90% deacetylation) showed similar anti-microbial activities at over 0.05% concentration. Especially, chitosan having M.W 40,000 150,000 showed the excellent anti-microbial activity. The anti-microbial activity of chitosan was enhanced when the chitosan/acetic add solution was aged for 7days. The anti-microbial activity of chitosan was only shown at chitosan/acetic acid solution. The anti-microbial activity was not detected in chitosan solution dissolved in neutral pH water. Therefore, it can be concluded that the anti-microbial activity was due to NH3+ cationic ion of chitosan in acidic aqueous solution.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.5
• /
• pp.596-603
• /
• 2003

Present study has been conducted to see the relative effects of adding N: to fuel-side and air-side on flame structure, soot formation and NOx emissions. Experiments were carried out to ascertain to what degree chemical kinetics and/or molecular transport effects can explain the differences in soot formation and NOx emission by studying laminar diffusion flames. Direct photograph was taken to see the flame structure. CARS techniques was used to get the flame temperature profiles. And spatial distribution of soot could be obtained by PLII method. CHEMKIN code was also used to estimate the global residence time to predict NOx emissions at each condition. Results from these studies indicate that fuel-side dilution is more effective than air-side dilution in view of NOx emissions. However, air-side dilution shows greater effectiveness over fuel-side dilution in soot formation. And turbulent mixing and heat transfer problems were thought to be considered in practical applications.

• 한국연소학회:학술대회논문집
• /
• 2003.12a
• /
• pp.19-26
• /
• 2003

Experimental measurements of flame structure and soot characteristics were performed for ethene inverse diffusion flames (IDF). IDF has been considered as the excellent flow field to study the incipient soot because soot particle do not experience the oxidation process. In this study, LIF image clarified the reaction zone of IDF with OH signal and PAH distribution. laser light scattering technique also identified the being of soot particle. To address the degree of soot maturing, C/H ratio and morphology of soot sample were investigated. From these measurements, the effect of flow residence time and temperature on soot inception could be suggested, and more details on soot characteristic in the IDF was determined according to fuel dilution and flame condition. The fuel dilution results in a decrease of temperature and enhancement of residence time, but the critical dilution mole fraction is existed for temperature not to effect on soot growth. Also, the soot inception evolved on the specific temperature and its morphology are independent of the fuel dilution ratio of fuel.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.9-15
• /
• 2006

Neutral sizing is required for linerboard to solve the troubles in strength and process caused by recycled raw materials. AKD sizing efficiency can be influenced by process condition like white water quality, fines retention and so on. Therefore, this study was aimed to evaluate sizing performance of general and fast cure type AKDs using process water obtained from linerboard mill. To evaluate effect of process water quality on AKD sizing, white water was diluted with tap water at the different dilution ratios and UKP slurry was sized using the prepared water. Also, effects of inorganic and organic ion material on sizing were examined. When white water was used for stock forming, UKP sheet showed very low sizing degree. Sizing degree of sheet was increased with increase of dilution ratio because water quality was improved. Especially anionic organic material had a greater influence on AKD sizing than inorganic material. When white water quality was deteriorated, fast cure type AKD showed superior sizing performance to general type AKD.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.9
• /
• pp.1101-1109
• /
• 2004

Experimental measurements of flame structure and soot characteristics were performed fur ethene inverse diffusion flames (IDF). IDF has been considered as the excellent flow field to study the incipient soot because soot particle do not experience the oxidation process. In this study, LIF image clarified the reaction zone of IDF with OH signal and PAH distribution. laser light scattering technique also identified the being of soot particle. To address the degree of soot maturing, C/H ratio and morphology of soot sample were investigated. From these measurements, the effect of flow residence time and temperature on soot inception could be suggested, and more details on soot characteristic in the IDF was determined according to fuel dilution and flame condition. The fuel dilution results in a decrease of temperature and enhancement of residence time, but the critical dilution mole fraction is existed for temperature not to effect on soot growth. Also, the soot inception evolved on the specific temperature and its morphology are independent of the fuel dilution ratio of fuel.

• Korean Journal of Veterinary Service
• /
• v.23 no.1
• /
• pp.19-28
• /
• 2000

There are several main antibacterial susceptibility tests, such as agar dilution method, broth dilution method and disk diffusion technique. Especially, for minimal inhibitory concentration (MIC) test, agar dilution method has been widely used. But that method is so complicated and bothering that it's difficult to treat a large amount of strains. On the other hand, modified broth dilution method(add 1% glucose and 0.018% phenol red as a pH indicator to broth) is fast and easy to perform. Most of all, it can visualize the result by color. The MICs of 22 antibiotics Including penicillins, aminoglycosides, cephalothin, chloramphenicol, lincomycin, ceftiofur, vancomycin and quinolones, erythromycin, colistin. sul-fadimethoxine, trimethoprim for arcanobacterium pyogenes 14 strains, actinobacillus pleuropneu-moniae 41 strains and pasteurella multocida 37 strains, which were collected from porcine during 1996 ∼ 1999, were determined by modified broth dilution method. Actinobacillus pleuropneumoniae was highly susceptible to all kinds of quinolones such as ciprofloxacin, enrofloxacin and norfloxacin and to all aminoglycosides, like gentamicin, apramycin, kanamycin and ampicillin, cephalothin and ceftiofur. But It was quite resistant to solfadimethoxin, colistin and vancomycin. Pasteurella multocida was found to have high susceptibility to ampicillin, cephalothin, chlorampenicol and gentamicin but had mid-degree susceptibility to other aminoglycosides. In addition, it was susceptible to norfloxacin and nalidixic acid, but not to newer fluoroquinolone like ciprofloxacin and enrofloxacin and it was resistant to colistin and kanamycin. Arcanobacterium pyogenes was highly susceptible to most of quinolones such as cipoofloxacin, enrofloxacin and norfloxacin and gentamicin and penicillin G. But it also obtained high resistance against the early quinolone, nalidixic acid and aminoglycosides such as amikacin, apramycin and kanamycin and erythromycin, chlorampenicol, tetracyclin and vancomycin.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.10
• /
• pp.225-232
• /
• 2019

The trademark dilution of famous marks as a kind of unfair competition practice is defined and regulated in Article 2 (1) (c) of the Unfair Competition Prevention and Trade Secret Protection Act (hereinafter referred to as the Unfair Competition Prevention Act), which was newly established according to the amendment of the Act on February 3, 2001. Famous trademarks are universally protected in all around the world, which are likewise protected in the Republic of Korea by the Unfair Competition Prevention Actin line with such international trends. In order to establish the trademark dilution of famous marks, it is necessary to have the following characteristics: (1) high reputation of the original mark, (2) use of identical or similar markscompared to the original mark, (3) occurrence of blurring of discrimination or tarnishment of reputation; in particular, with respect to the degree of proof of 'blurring of discrimination or tarnishment of reputation', which is a constituent requirement of the trademark dilution of famous marks, it is reasonable to interpret the trademark dilution as concrete endangerment offense, neither harm-based offense nor abstract endangerment offense, and thus it should be considered that the crime is established if a specific realistic risk of blurring of discrimination or tarnishment of reputation occurs. Furthermore, in relation to the specific criteria of 'blurring of discrimination or tarnishment of reputation', it is necessary to comprehensively judge the degree of individual behavior in specific matters as a normative factor as well as the psychosocial viewpoint of the general public.

• Restorative Dentistry and Endodontics
• /
• v.28 no.5
• /
• pp.425-430
• /
• 2003

The purpose of this study was to evaluate the clinical applications of the Sodium Dichloroisocyanurate effervescent tablet as a routine root canal irrigant by performing several in vitro tests such as $Cl^{-}$ content. cytotoxicity. antimicrobial effect as well as its pH level compared to the equivalent concentration of sodium hypochlorite solution. 1. Sodium Dichloroisocyanurate demonstrated lower level of $Cl^{-}$ concentration than each dilution of sodium hypochlorite solution. Both solution has increased level of $Cl^{-}$ as the concentration of each solution increased. There was no significant change of $Cl^{-}$ concentration in sodium hypochlorite as time goes by. However. $Cl^{-}$ concentration in Sodium Dichloroisocyanurate was increased. 2. The antimicrobial effects of both solutions were increased when their concentrations were increased. One day after dilution. antimicrobial effect of Sodium Dichloroisocyanurate was slightly higher than sodium hypochlorite. however. there was no difference in 1 week dilution solution. One month dilution solution of sodium hypochlorite still retain its activity. but antimicrobial effect of Sodium Dichloroisocyanurate was drastically decreased 1 month after dilution. 3. The cytotoxicity of Sodium Dichloroisocyanurate was rather higher than same concentration of sodium hypochlorite solution until 1 week after dilution. Then in 1 month. cytotoxicity of Sodium Dichloroisocyanurate was decreased than that of 1 week dilution solution. especially 4% Sodium Dichloroisocyanurate solution has almost no toxicity. However. 1% and 2% sodium hypochlorite solution has unchanged moderate degree of cytotoxicity after the dilution. Furthermore. 4% sodium hypochlorite solution showed high level of toxicity. 4. The pH level of Sodium Dichloroisocyanurate showed that the solution was weak acid (pH5). On the other hand. sodium hypochlorite was revealed as a strong alkaline solution (pH12). There was no change in pH following the dilution of each solution. As results. Sodium Dichloroisocyanurate solution fully satisfy the basic requirements as a root canal irrigation solution. However. we strongly recommend to use this solution clinically in low concentration and try to apply into the root canal within 1 week after dilution.

• Journal of the Korean Institute of Gas
• /
• v.26 no.5
• /
• pp.35-40
• /
• 2022

PCVD (Plasma Chemical Vapor Deposition), a solar cell manufacturing facility, is a facility that deposits plasma generated in a chamber (NH₃, SIH₄, O₂ on a wafer. In the PCVD facility, gas movement and injection is performed in the gas cabinet, and there are many leak points inside because MFC, regulator, valve, pipe, etc. are intricately connected. In order to prevent explosion in case of leakage of NH₃ with an upper explosive limit (UEL) of 33.6% and a lower explosive limit (LEL) of 15%, the dilution capacity must be capable of allowing the concentration of NH₃ to be out of the explosive range. This study was analyzed using the CFD analysis technique, which can confirm the dilution ability in 3D and numerical values when NH₃ gas leaks from the existing PCVD gas cabinet. As a result, it was concluded that it corresponds to medium dilution and that testicular ventilation is possible through facility improvement.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.417-422
• /
• 2023

In this study, normal saline was diluted with the contrast medium at a certain ratio for the purpose of reducing the image quality poor and side effects caused by the contrast medium during CT examination. At this time, by finding the energy level of DECT that can compensate for the decrease in contrast of the image according to the degree of dilution, the usefulness of applying DECT for compensating the difference in image contrast was investigated through comparative analysis by applying SNR, CNR, and SSIM. As a result, when a dilution ratio of 4 (contrast medium): 6 (normal saline) and the energy level of DECT of 65 keV were applied, the contrast difference was the most similar to that when using the undiluted contrast medium. At this time, SNR was 813.71 ± 37.6, CNR was the highest at 921.87 ± 17.1, and SSIM index was measured at 0.851, which is the most similar to 1. The results of this study are meaningful in providing basic information for finding the appropriate dilution rate and energy level for each examination site through future clinical studies. It is believed that it can be reduced.