• 한국재료학회지
• /
• 제23권12호
• /
• pp.737-744
• /
• 2013

We demonstrated size control of Au nanoparticles by heat treatment and their use as a catalyst for single-walled carbon nanotube (SWNTs) growth with narrow size distribution. We used uniformly sized Au nanoparticles from commercial Au colloid, and intentionally decreased their size through heat treatment at 800 oC under atmospheric Ar ambient. ST-cut quartz wafers were used as growth substrates to achieve parallel alignment of the SWNTs and to investigate the size relationship between Au nanoparticles and SWNTs. After the SWNTs were grown via chemical vapor deposition using methane gas, it was found that a high degree of horizontal alignment can be obtained when the particle density is low enough to produce individual SWNTs. The diameter of the Au nanoparticles gradually decreased from 3.8 to 2.9 nm, and the mean diameter of the SWNTs also changed from 1.6 to 1.2 nm for without and 60 min heat treatment, respectively. Raman results reconfirmed that the prolonged heat treatment of nanoparticles yields thinner tubes with narrower size distribution. This work demonstrated that heat treatment can be a straightforward and reliable method to control the size of catalytic nanoparticles and SWNT diameter.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.119-124
• /
• 2021

In a situation where Moore's law, which states that the performance of semiconductor integrated circuits doubles every two years, is showing a limit from a certain point, and it is difficult to increase the performance due to the limitations of exposure technology.In this study, a wafer hybrid method that can increase the degree of integration Various research on bonding technology is currently in progress. In this study, in order to achieve rotational precision between wafers in wafer hybrid bonding technology, modeling of θ_z alignment stage and VCM actuator modeling used for rotational alignment, magnetic field analysis and desgin, control, and evaluation are performed. The system of this study was controlled by VCM actuator, capactive sensor, and dspace, and the working range was ±7200 arcsec, and the in-position and resoultion were ±0.01 arcsec. The results of this study confirmed that safety and precise control are possible, and it is expected to be applied to the process to increase the integration.

• 한국통신학회논문지
• /
• 제36권5A호
• /
• pp.457-463
• /
• 2011

본 논문에서는 다중 셀 환경에서의 부분공간 간섭 정렬에서 레퍼런스 벡터간의 직교성을 통해 여러 개의 직교 레퍼런스 벡터 조합을 제공함으로써 전체 생의 합 용량이 최대화되도록 레퍼런스 벡터를 선정하는 방법을 제안하였다. 제안된 방법은 전체 셀의 채널용량을 최대화시키는 하나의 벡터를 선정하고 나머지 셀에서는 선택된 레퍼런스 벡터와 직교하는 벡터를 생성하여 채널 용량이 가장 큰 벡터를 각 셀의 레퍼런스 벡터로 선정한다. 제안된 방법은 주어진 채널에 적합한 레퍼런스 벡터를 선정 시 선택의 자유도를 높임으로써 기존보다 전체 셀 전송 용량을 증가시킨다. 전산 모의 실험을 통해 기존의 방법에 비해 높은 셀의 합용량 증대 성능을 보였다.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.123-132
• /
• 2012

PURPOSES: This study is to investigate the consideration which relates with a disaster from route alignment process and proposed the method it will be able to evaluate a disaster danger fixed quantity. METHODS: Use the landslide disaster probabilistic map of GIS based and in about landslide occurrence of the route alignment at the time of neighboring area after evaluating a risk fixed quantity, it compared LCC expense in about each alternative route. It developed the system it will be able to analyze a LCC and a disaster risk in about the alternative route. In order to verify a risk analytical algorithm and the system which are developed it selected national road 59 lines on the demonstrative route and it analyzed a disaster risk. RESULTS: Demonstrative route not only the disaster risk to be it will be able to compare a disaster risk fixed quantity like the economical efficiency degree in compliance with LCC expense productions it compared and there being the designer will be able to decide the alternative route, it confirmed. CONCLUSIONS: Roads can be designed by considering occurs repeatedly landslides and debris flow caused by disasters in advance and expect to be able to effect that can reduce the overall cost to recover losses caused by the disaster, and temporally loss is expected.

• 척추신경추나의학회지
• /
• 제6권1호
• /
• pp.11-17
• /
• 2011

A 28-year-old woman presented with postpartum pelvic pain. The patient complained severe pain and couldn't walk at all a week after natal. Computed tomography and plain radiography of the pelvis didn't reveal abnormal condition except asymmetrical alignment. Chuna treatment isn't usually applicable to the patient after natal. But we tried Chuna treatment to adjust the asymmetrical alignment of pelvis by half degree of strength. The pelvic pain improved considerably after 2 weeks treatment, so we report this case to emphasize the role of Chuna treatment in the management of postpartum pelvic pain.

• 연구논문집
• /
• 통권33호
• /
• pp.147-155
• /
• 2003

In order to fabricate porous materials having an anisotropic thermal conductivity by aligning plate-shaped pores structure, alumina powder (AM-21, mean particle size $4\mum$) and flake crystalline graphite was used. The aligned pore structure was realized using multi-pressing process. Degree of pore orientation increased with the number of pressing and thermal conductivity, parallel to the pressing direction, decreased with the number of pressing. Thermal conductivity decreased significantly to the addition of 30vol% crystalline graphite, however, in the case of 60vol%, thermal conductivity did not decrease significantly due to the breakage of crystalline graphite. An anisotropy of the thermal conductivity increased with the content of crystalline graphite up to 30vol%. Graded pore structure was fabricated by controlling the content and size of crystalline graphite, which provides, possibly, the enhancement in mechanical strength and thermal insulation properties of the insulating bricks.

• 품질경영학회지
• /
• 제27권3호
• /
• pp.1-16
• /
• 1999

According to the study of TQM implementations, the odds that an organization will successfully implement total quality management are two to one-against it. Based on the Brown's study, two thirds of all TQM implementations are dropped or fail altogether. However, organizations armed with knowledge of the factors that have the biggest impact on their success can take steps to influence or change those factors. In this paper, we studied on the degree of influence between those factors and successful start up and alignment factors. Based on extensive literature reviews those factors, threat, commitment, plan, progress and strategy are determined. Also we determine the successful start up and alignment factors. A framework of research including above factors is developed and tested statistically The Perceived data are collected from managers of quality departments of 141 Korean firms through survey. The results show that the rating of those factors which determine success of implementing TQM is progress, commitment, strategy and progress. But the factor of threat shows negative influence for the success of implementing TQM.

• 한국전기전자재료학회논문지
• /
• 제11권6호
• /
• pp.481-485
• /
• 1998

We investigated the generation of high pretilt angle for nematic liquid crystal (NLC) in a cell with obilique non-polarized ultraviolet (UV) light irradiation on mixtured polyimide surface. It was found that the monodomain alignment of NLC is obtained with an angle of incidence of 75∼85 degrees on PI surface. We consider that the monodomain alignment of NLC is attributed to anisotropic dispersion force effect to photo-depolymerization of polymer. We successfully observed that the pretilt angle of NLC is generated above 5 degree with an angle of incidence of 75∼85 degrees. It is considered that the pretilt angle generation NLC is attributed to interaction between the LC molecules and the polymer surfaces.

• 한국분말재료학회지
• /
• 제19권1호
• /
• pp.1-5
• /
• 2012

In order to improve the remanence of (Nd, Dy)-Fe-B sintered magnets, we investigated the influence of compaction conditions such as packing density, applied field and green density on the magnetic properties. While the remanence decreased with increasing the packing density and green density, it increased with the increase of the applied field. In addition, XRD analysis revealed that the remanence was enhanced as the degree of powder alignment was improved. The green density was more influential on the remanence than the packing density and applied field.

• 제어로봇시스템학회논문지
• /
• 제17권11호
• /
• pp.1159-1167
• /
• 2011

A novel 3D tube scanning technique is proposed. The proposed tube scanning technique is developed for a special tube inspection module which consists of four line-lasers and one camera. Using the scanning module, we can reconstruct the 360 degree shapes of the inner surfaces of a cylindrical tube. From an image frame captured by the camera, we reconstruct a partial tube model based on four laser triangulations. Then by aligning such partial models with respect to a reference tube axis, a complete 3D shape of the tube is reconstructed. The tube axis in each reconstructed frame is aligned with a 3D Euclidean transformation to the reference axis. Several experiments show that the proposed method can align multiple tube axes very accurately and reconstruct 3D shapes of a tube with very low shape distortion.