• 한국전자통신학회논문지
• /
• 제19권2호
• /
• pp.467-472
• /
• 2024

다중서열정렬(MSA : multiple sequence alignment)은 다양한 생명체에서 같은 기능을 하는 여러 개의 단백질 서열이나 핵산 서열을 한 번에 모아서 서로 정렬하는 방법이다. 바이오파이썬을 이용하여 인간이 다른 동물과 어떻게 다른지 조사하였다. 대표적인 다중서열정렬 알고리즘인 clustalW는 열의 위치별로 정렬된 정도를 비교한다. 또한, 웹로고와 계통수를 만들어서 보존서열을 가시화하여 이해도를 향상한다. 인간과 다른 동물의 차이점을 확인하는 예를 제시하고 바이오파이썬을 활용도를 제시한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.564-566
• /
• 1992

It is tragic that the Korean Airline Boing 747, KE007, wandered hundreds of miles off course into Soviet airspace and was shot down on September 1, 1983. The exact cuases are not known yet. Thus, speculation centers on human error or faulty procedure of three Litton LTN-72R inertial navigation systems(INS) with which the KAL KE007 was equipped. The inertial platform must be aligned before the INS can be used as a precision inertial navigation system. This analysis checks a possibility that the navigation errors are caused by a wrong INS alignment procedure assuming it is done at Anchorage. Possible causes for the navigational position error, such as alignment errors and gyro drift errors, are analyzed through inertial navigation system error prapagation simulations. A set of misalignment angle is estimated to determine what degree of alignment errors are required to cause the navigation error assuming that the accident is caused by the INS misalignment.

• 대한전자공학회논문지TC
• /
• 제49권6호
• /
• pp.27-38
• /
• 2012

본 논문에서는 최근 스마트 폰의 급격한 보급과 음성 위주의 이동 통신 서비스가 무선 멀티미디어 콘텐츠를 중심으로 하는 데이터 위주의 서비스로 전환되고 있음을 보였고, 셀 서비스 문제인 음영(shadowing) 지역을 해결할 수 있는 방안으로 다중점 송수신(CoMP:Coordinated Multi-Point Transmission and Reception) 기법을 소개하였다. 간섭 신호의 영향을 줄이기 위해서는 원하지 않는 간섭 신호를 직교하도록 제어하는 것이 이상적이지만, 현실적인 응용에서는 간섭을 정렬하거나 회피하는 방법이 이용된다. 간섭을 적이 아닌 친구처럼 대할 수 있도록 하는 방법이 간섭 정렬 기법이다. 강한 간섭이 존재하는 가우시안 채널 에서 격자 부호가 랜덤 부호처럼 Shannon 채널 용량을 달성할 수 있음을 확인하였고, 세 명의 사용자가 존재하는 대칭 간섭 채널의 간섭 정렬에 격자 부호를 적용하여 채널 매개 변수 a와 자유도(DoF:Degree of Freedom)의 상관관계를 보였다.

• 한국전기전자재료학회논문지
• /
• 제14권6호
• /
• pp.499-504
• /
• 2001

We evaluated the degree of texture through depth of the superconductor core of Bi-Sr-Ca-Cu-O(BSCCO) superconductor tape. The degree of texture was characterized by pole figure analysis indicating that the degree of texture varied significantly with depth of the superconductor core. It was observed that the degree of texture was higher near the interface than inside the superconductor core. Specifically, as getting near to the center from the sheath/core interface, the orientation of BSCCO became dispersed from normal direction(ND) which, in turn, resulted in the degradation of <001>-fiber texture. In addition, the <001> texture was non-uniform an, better texture was developed along rolling direction(RD), compared to transverse direction(TD). Microstructural investigation showed that grain alignment was locally degraded by the existence of second phases. I was observed that larger grain size and better texturing were developed near the relatively straight interface compared to those inside the superconducting core. Based on our study, the region near the interface is thought to carry significant current compared to that inside the core.

• Composites Research
• /
• 제31권4호
• /
• pp.171-176
• /
• 2018

인공 건식 접착 구조를 위한 새로운 마이크로-나노 계층구조 제작기법을 제안하였으며, 모세관법을 활용한 마이크로 구조 내 나노 소재 정렬에 대한 기초 연구를 수행하였다. 다중 벽 탄소나노튜브(MWCNT)와 폴리디메틸실록산(PDMS) 혼합물의 제작 조건에 따른 경화도 및 점도 특성을 분석하고, 이로부터 몇 가지 제작 조건을 결정하였다. MWCNT-PDMS 마이크로 구조 제작 후 단면 분석을 통해 PDMS내 MWCNT의 정렬 특성을 분석한 결과, 제작 온도와 상대 경화도가 낮을 경우 MWCNT의 정렬도가 우수하며, 단위 면적당 MWCNT의 밀도는 제작 온도나 상대 경화도에 영향을 적게 받는 것으로 확인되었다.

• Physical Therapy Rehabilitation Science
• /
• 제5권2호
• /
• pp.84-88
• /
• 2016

Objective: Generally, it is known that there is a correlation between excessive calcaneus eversion and a patient with low back pain and it also affects pelvic alignment. However, there are not enough studies that show calcaneal eversion having an effect on the alignment of the trunk. Design: Cross-sectional study. Methods: A 3-dimensional motion analysis system was used to assess the lower limbs, pelvic alignment, and trunk alignment with increased unilateral and bilateral calcaneal eversion in twenty-one subjects. All subjects were asked to maintain a static posture for seven seconds on a wedge three times per posture for measurement and analysis purposes. The wedge used in the process was a lateral wedge with a 10-degree tilt to the lateral direction. To unify all of the subjects' foot position, the front and inner side of the wedge were marked. The height of the tilted wedge's inner side and flat wedge were balanced equally in order to be able to maintain the lateral part of the foot to the same height when producing an increased calcaneal eversion. Results: Comparing the changes in trunk and pelvic alignment in accordance to calcaneal eversion for each posture, there was a significant different in the X and Y-axis for each posture, but not in the Z-axis (p<0.05). Thus, it can be confirmed that calcaneal eversion in the sagittal plane and frontal plane may have and effect on the pelvis and the trunk. Conclusions: Postures with increased bilateral and unilateral calcaneal eversion has an effect on pelvic alignment, but does not cause any changes in trunk alignment.

• 한국경영과학회지
• /
• 제36권2호
• /
• pp.67-88
• /
• 2011

This study empirically investigated the effects of knowledge management(KM) strategic alignment on the KM activities as well as the product and process innovation of manufacturing firms. Based on the framework, which employs the usage levels of target costing systems(TCS) and information technology(IT) infrastructure, four types of KM strategies were identified and proposed：mixed, explorative, exploitative and negative strategies. In this research, these four types of KM strategies were empirically validated. According to the results of this study, it was found that when a explorative KM strategy is aligned with a low-cost strategy, KM activities are activated and the degree of a process innovation is increased. It was observed that in the case of the alignment between a differentiation strategy and a exploitative KM strategy, both KM activities and the level of a product innovation are enhanced. The results also demonstrated that for the enhancement of both a process and a product innovation through the activation of KM activities, a mixed KM strategy must be aligned with a composite business strategy, which focuses on a low-cost as well as a differentiation strategies. Accordingly, it is concluded that the KM activities and the levels of the product and process innovation can be activated or improved with the alignment of the KM strategies and business strategies.

• Transactions on Electrical and Electronic Materials
• /
• 제9권3호
• /
• pp.120-122
• /
• 2008

We have studied the tilt angle generation on the homeotropic polyimide (PI) surface using a low intensity ion beam source as a function of incident angle. An excellent LC alignment of nematic liquid crystal (NLC) on the PI surface with ion beam exposure for all incident angles was observed. The tilt angle of NLC on the homeotropic PI surface for all incident angles was from 90 to 88 degree was observed. Also the tilt angle of NLC on the homeotropic PI surface with ion beam exposure of 400 eV had a tendency to increase as ion beam energy incident angle become more instance from 45 degree. Finally, a good LC alignment thermal stability on the homeotropic PI surface with ion beam exposure can be achieved.

• Journal of Information Display
• /
• 제5권2호
• /
• pp.39-42
• /
• 2004

A novel fast-switching LCD with dual-domain bend (DDB) mode is described. DDB alignment is achieved using antiparallel-rubbed cell filled with chiral-doped LC. Initial alignment is mono-domain 180-degree twist. Tilt direction is controlled by oblique electric field to be counter direction in each domain. Twist-to-DDB deformation occurs continuously so that DDB mode does not require high-voltage initialization which is inevitable in Optically Compen sated Bend (OCB) mode. DDB gives wide and symmetric viewing angle in contrast to mono-domain bend formed from 180-degree twist showing strong asymmetry.

• 디지털산업정보학회논문지
• /
• 제16권1호
• /
• pp.111-129
• /
• 2020

The differentiators of this study are as follows. I would like to consider the factors that the compensation, considering the characteristics of the members of the ICT construction company, affects the turnover and suggest ways to promote the welfare of ICT construction company members in the fourth industrial revolution. The purpose of this study is to look at how perceived compensation affects the degree of turnover by members of small ICT construction companies through organizational Commitment and job placement. Specifically, the independent variable looks at the causal relationship between organizational civic behavior and organizational trust through Turnover intention. First, in the fourth industrial revolution, the management of the tasks of members of ICT construction companies was found to have a positive impact on their organizational immersion and job alignment. Second, in the fourth industrial revolution, the management of wages by members of ICT construction companies was found to have a positive impact on organizational immersion and job alignment. Third, in the fourth industrial revolution, the promotion management of members of ICT construction companies did not have a positive impact on their organizational immersion and job alignment Fourth, in the fourth industrial revolution, the concentration of members of ICT construction companies' organization is found to have a positive influence on turnover. Fifth, in the fourth industrial revolution, the job alignment of members of ICT construction companies was found to have a positive impact on turnover.