• Journal of Oral Medicine and Pain
• /
• v.24 no.1
• /
• pp.95-106
• /
• 1999

This study was performed to investigate the age distribution with tooth calcification and degree of eruption of permanent teeth. For the study, healthy 184 patients from 5 to 19 years old without any previous serious dental treatment were randomly selected, and intraoral standard films and dental casts were taken for evaluation of stage of calcification and degree of eruption, respectively. Tooth calcification of 13 stages, designed by the author based on the Nolla's classification and eruption level of 4 or 5 degree was used. Data were processed by SAS/Stat program and the obtained results were as follows; 1. The age of root completed with open apex in lower posterior teeth were 13.8 years for first premolar, 14.0 years for second premolar, 10.5 years for first molar, and 14.2 years for second molar. There were no significant difference between right and left side. 2. As for the sequence of eruption, first molar was the first teeth erupted in upper arch, while central incisor was the first teeth in lower arch. In general, eruption of lower teeth were slightly earlier than the corresponding teeth of upper arch. 3. There were no difference of age of the same stage of development between Nolla's and the author's classification. From the results, the author's classification can be used for estimation of age with more finely in age of 8 to 15 years old. 4. Multiple regression equations for age with Nolla's(Ns) and the author's(Ks) classification of tooth calcification, and degree of eruption(DE) were as follow; Age(by #34) = 7.55 + 0.76Ks34 + 0.80DE34 - 0.72Ns34 Age(by #35) = 7.10 + 0.81Ks35 + 0.6IDE35 Age(by #37) = 6.61 + 0.82Ks37 + 0.5IDE37. Age(by #44) = 7.02 + 0.62Ks44 + 0.82DE44 Age(by #45) = 8.04 + 0.93Ks45 + 0.64DE45 - 0.89Ns45 Age(by #47) = 6.40 + 0.86Ks47 + 0.56DE47.

• Economic and Environmental Geology
• /
• v.38 no.3 s.172
• /
• pp.299-304
• /
• 2005

Geoid undulation and gravity anomaly were calculated from GRACE satellite data on the eastern Asia including Korean peninsula. Geoid undulation varies from -60m in the China to 60m toward the Pacific Ocean across the Korean Peninsula. Calculated gravity anomalies are in the range of -60 and 60 mgal except the subduction zone showing -100 mgal. High positive values are observed at Mt. Baekdu, Kaema highland and Taebaek mountains, and low values at Ulleung, Japan and Yamato basins in the East sea. We removed regional components below the spherical harmonic degree of 10 from gravity anomaly to get the residual anomaly for crust components. Residual gravity anomaly shows high anomalies at the northern mountainous area and Kyungsang basin in the Korean Peninsula. And low anomalies appears at the western Korea bay basin, Kunsan basin, Cheju basin, and Ulleung basin in the marine. Anomalies separated by the spherical harmonic degree as well as the residual anomalies are useful for the study of large crustal structure about geologic scale and depth distribution and for the survey of natural resources.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.1
• /
• pp.52-59
• /
• 2006

Purpose: The purpose of this study was to evaluate the influence of apical-coronal implant position on the stress distribution after occlusal and oblique loading. Materials and Methods: The cortical and cancellous bone was assumed to be isotropic, homogeneous, and linearly elastic. The implant was apposed to cortical bone in the crestal region and to cancellous bone for the remainder of the implant-bone interface. The cancellous core was surrounded by 2-mm-thick cortical bone. An axial load of 200 N was assumed and a 200-N oblique load was applied at a buccal inclination of 30 degrees to the center of the pontic and buccal cusps. The 3-D geometry modeled in Iron CAD was interfaced with ANSYS. Results: When only the stress in the bone was compared, the minimal principal stress at load Points A and B, with a axial load applied at 90 degrees or an oblique load applied at 30 degrees, for model 5. The von Mises stress in the screw of model 5 was minimal at Points A and B, for 90- and 30-degree loads. When the von Mises stress of the abutment screw was compared at Points A and B, and a 30-degree oblique load, the maximum principal stress was seen with model 2, while the minimum principal stress was with model 5. In the case of implant, the model that received maximum von Mises stress was model 1 with the load Point A and Point B, axial load applied in 90-degree, and oblique load applied in 30-degree. Discussion and Conclusions: These results suggests that implantation should be done at the supracrestal level only when necessary, since it results in higher stress than when implantation is done at or below the alveolar bone level. Within the limited this study, we recommend the use of supracrestal apical-coronal positioning in the case of clinical indications.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.5
• /
• pp.660-667
• /
• 2000

In order to investigate the exhaust structure and secondary oxidation of unburned hydrocarbon (HC) in the exhaust port, concentrations of individual HC species were measured in exhaust process, the degree of oxidation were obtained. Using a solenoid-driven fast sampling system on single-cylinder research engine fueled with 94% propane, the profiles of unburned hydrocarbons (HCs) and non-fuel HCs with a propane fueled engine were obtained from several locations in the exhaust port during the exhaust process. The sampled gases were analyzed using a gas chromatography of HC species with 4 or lesser carbon atoms. The change of total HC concentration and HC fractions of major components through the exhaust port were discussed. The results showed that non-uniform distribution of HC concentration existed around the exhaust valve and changed with time, and that the exhaust gas exhibited nearly uniform concentration profile at port exit, which was due to mixing and oxidation. Also it could be known that bulk gas with relatively high HC concentration came out through the bottom of the exhaust valve. To estimate the mass-based degree of HC oxidation in the exhaust port from measured HC concentrations, a 3-zone diagnostic cycle simulation and plug flow modeling were used. The degree of oxidation ranged between 26 % and 36 % corresponding to the engine operation conditions.

• The Journal of Engineering Geology
• /
• v.1 no.1
• /
• pp.121-136
• /
• 1991

The focal mechanism of the Hongsung Earthquake (1978. Oct. 7, M$_L$=5.0, Latitude 36.62N, Longitude 1 26.67E) was evaulated using the polarity distribution of the P-Waveforms. Through the non-linear computer process, the compatibility of polarity distributions of the 9 P-Waveforms observed at teleseismic distances from the Hongsung Earthquake epicenter was investigated to those of the focal mechanism determined from the varying strike, dip and rake angles. The resultant values for the strike and dip angle of the principal fault plane, which apparently matches very well the sunface lineament of the Hongsung region, are determined to be about 247 degree and 78 degree with uncertainties, respectively. However, the rake angle of the focal mechanism has wide range of 40 degree to 160 degree, which is mainly due to the poor coverage of the azimuthal angle of the observed seismic stations. Due to the consistency of principal stress axes, the resultant focal mechanism could support the current stress regime of that region, which may be caused by subduction of the Pacific Plate under the Eurasia Plate along the Japan Trench. It also provides information of seismic source characteristics of the part of the Korean Peninsula for aseismic design criteria such as Site Specific Response Spectrum and Strong Ground Motion Time History for the nuclear power plants and related nuclear waste disposal facility sites.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.163-169
• /
• 1989

Seasonal climatic factors associated with tobacco quality grade and production rate were analyzed. The degree of influence on yield distribution rate in high guality tobacco leaues was highly positive with the average temperature in early May, but negatively related to those in late May and early June. Positive correlations were noticed between the degree of influence and sunshine hours in Middle June, late June and late May in decrease order, while negative degree of influence was higher in early May than in late May, The order influenced by recipitation in a positive direction was early May, late May and middle May. Negative influence was noticed in middle and early June with a great degree.

• Journal of Engineering Education Research
• /
• v.27 no.1
• /
• pp.3-12
• /
• 2024

The degree-linked programs for employees, operated by joint training centers in specialized universities that have implemented work-study integrated programs, are educational programs that require an annual government budget of around 80 billion KRW. However, the 70+ universities running these programs face issues such as a decline in academic achievement and an increase in dropout rates among students. In this paper, I conducted multiple regression analysis based on observed and measured information to examine whether the participating students in these programs are achieving an appropriate level of academic performance and to identify the factors that universities need to invest in to achieve that level. To do this, I hypothesized a causal relationship between the university's input factors and students' academic achievement, and used the SPSS program to analyze the statistical data, confirming the validity of the hypothesis. The collected data for the study were obtained through a survey developed using a Likert 4-point scale, which quantified the distribution of grades among students enrolled in IT-related departments offering the degree-linked programs for employees and the emotional contact efforts made by the universities to motivate them for academic success. Particularly, through the results of multiple regression analysis, it was confirmed that these input factors, unlike those for students in general education programs, require more personalized and frequent interactions.

• International Journal of Automotive Technology
• /
• v.6 no.1
• /
• pp.53-63
• /
• 2005

We propose a fuzzy neural network (FNN) theory capable of deciding the quality of a road image prior to extracting lane-related information. The accuracy of lane-related information obtained by image processing depends on the quality of the raw images, which can be classified as good or bad according to how visible the lane marks on the images are. Enhancing the accuracy of the information by an image-processing algorithm is limited due to noise corruption which makes image processing difficult. The FNN, on the other hand, decides whether road images are good or bad with respect to the degree of noise corruption. A cumulative distribution function (CDF), a function of edge histogram, is utilized to extract input parameters from the FNN according to the fact that the shape of the CDF is deeply correlated to the road image quality. A suitability analysis shows that this deep correlation exists between the parameters and the image quality. The input pattern vector of the FNN consists of nine parameters in which eight parameters are from the CDF and one is from the intensity distribution of raw images. Experimental results showed that the proposed FNN system was quite successful. We carried out simulations with real images taken in various lighting and weather conditions, and obtained successful decision-making about $99\%$ of the time.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1078-1080
• /
• 1995

The pulsed electro-acoustic method was used as a nondestructive measurement technique of spare charge distribution in dielectric materials. In our work presented here, we measured simultaneously the space charge distribution and conduction current in the low-density polyethylene samples with elevated temperatures up to $80^{\circ}C$ and electric field up to 20kV/mm. In the temperature less than $50^{\circ}C$, homocharges are mainly accumulated close to the electrodes under DC bias and after grounding. At the temperature exeeds $50^{\circ}C$, heterocharges are accumulated near the opposite electrode under DC bias. However after grounding the upper electrode, this charges immediately disappeared. The conduction current in LDPE at $20^{\circ}C$ and $30^{\circ}C$ was reduced slowly with increasing interval of applied voltage. But as temperature increased, the conduction current tended to increase slowly with the time and the degree of increase is enlarged.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.1
• /
• pp.22-37
• /
• 2013

Content distribution to a large number of concurrent clients stresses both server and network. While the server limitation can be circumvented by deploying server clusters, the network limitation is far less easy to cope with, due to the difficulty in measuring and balancing network load. In this paper, we use two useful network load metrics, the worst link stress (WLS) and the degree of interference (DOI), and formulate the problem as partitioning the clients into disjoint subsets subject to the server capacity constraint so that the WLS and the DOI are reduced for each session and also well balanced across the sessions. We present a network load-aware partition algorithm, which is practicable and effective in achieving the design goals. Through experiments on PlanetLab, we show that the proposed scheme has the remarkable advantages over existing schemes in reducing and balancing the network load. We expect the algorithm and performance metrics can be easily applied to various Internet applications, such as media streaming, multicast group member selection.