• Journal of the Korean Data and Information Science Society
• /
• v.28 no.4
• /
• pp.831-841
• /
• 2017

The irrational number ${\pi}$ is defined as the ratio of circumference of a circle to its radius and always becomes constant. This article does Monte Carlo approximation of its value using the famous Buffon's needle experiment and shows that its convergence is not always proportional to the sample size. We also do Monte Carlo simulations to see the convergence of the computed ${\pi}$ values from the random walk series with independent normal increment. Finally we apply the theoretical derivation to various financial time series data such as KOSPI, stock prices of Korean big firms, global stock indices and major foreign exchange rates. The historical data shows that log transformed data random walk process but most of their first lagged data don't follow a normal distribution. More importantly the computed value from the ratio of the regression coefficient ${\pi}$ tend to converge a constant, unfortunately not ${\pi}$. Using this result we could doubt on the efficient market hypothesis, and relate the degree of the hypothesis with the amount of deviation of the estimated ${\pi}$ values.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.37-44
• /
• 1999

Because of bone resorption, wear of ultra-high molecular weight polyethylene(UHMWPE) in total knee arthroplasty has been recognized as a major factor in long-term failure of knee implant. The surface damage and the following harmful wear debris of UHMWPE is largely related to contact stress. Most of the previous studies focused on the contact condition only at the articulating surface of UHMWPE. Recently, contact stress at the metal-backing interface has been implicated as one of major factors in UHMWPE wear. Therefore, the purpose of the is study is to investigate the effect of the contact stress for different thickness, conformity friction coefficient, and flexion degree of the UHMWPE component in total knee system, considering the contact conditions at both interfaces. In this study, a two-dimensional non-linear plane strain finite element model was developed. The results showed that the maximum value of von-Mises stress occurred below the articulating surface and the contact stress was lower for the more conforming models. All-polyethylene component showed lower stress distribution than the metal-backed component. With increased friction coefficient on the tibiofemoral contact surface, the maximum shear stress increased about twofold.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.9 no.2
• /
• pp.108-115
• /
• 2009

Trauma to any nerve may lead to persistent paresthesia. Trauma to the nerve sheath can be produced by the needle. The patient frequently reports the sensation of an electric shock throughout the distribution of the nerve involved. It is difficult for the type of needle used in dental practice to actually sever a nerve trunk or even its fibers. Trauma to the nerve produced by contact with the needle is all that is needed to produce paresthesia. Hemorrhage into or around the neural sheath is another cause. Bleeding increases pressure on the nerve, leading to paresthesia. Injection of local anesthetic solutions contaminated by alcohol or sterilizing solution near a nerve produces irritation; the resulting edema increases pressure in the region of the nerve, leading to paresthesia. Persistent paresthesia can lead to injury to adjacent tissues. Biting or thermal or chemical insult can occur without a patient's awareness, until the process has progressed to a serious degree. Most paresthesias resolve in approximately 8 weeks without treatment. In most situations paresthesia is only minimal, with the patient retaining most sensory function to the affected area. In these cases there is only a very slight possibility of self injury. But, the patient complaints the discomfort symptoms of paresthesia, such as causalgia, neuralgiaform pain and anesthesia dolorosa. Most paresthesias involve the lingual nerve, with the inferior alveolar nerve a close second. This is the report of a case, that had the persistent paresthesia care on left lingual & buccal shelf regions after the lingual and long buccal nerve block anesthesia.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.684-692
• /
• 2016

In the manufacturing process of the LQFP/TQFP (Low-profile Quad Flat Package/Thin Quad Flat Package), the requirement of a 3 dimensional inspection is increasing rapidly and a 3D inspection of the shape of a chip has become an important report of quality control. This study developed a 3 dimensional measurement system based on PMP (Phase Measuring Profilometry) for an inspection of the LQFP/TQFP chip and image processing algorithms. The defects of the LQFP/TQFP chip were classified according to the dimensions. The 2 dimensional optical system was designed by the dorm illumination to achieve constant light distribution, In the 3 dimensional optical system, PZT was used for moving 90 degree in phase. The problem of 2 ambiguity was solved from the measured moir? pattern using the ambiguity elimination algorithm that finds the point of ambiguity and refines the phase value. The proposed 3D measurement system was evaluated experimentally.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.9
• /
• pp.817-825
• /
• 2013

The UHDTV system, which provides realistic service with ultra-high definite video and multi-channel audio, has been studied as a next generation broadcasting service. Since the conventional digital terrestrial transmission system is not capable to cover the increased transmission data rate of the UHDTV service, there are great necessity of researches about increase of data rate. Accordingly, the researches has been studied to increase the transmission data rate of the DVB-T2 system using dual-polarized MIMO technique and high order modulation. In order to optimize the MIMO DVB-T2 system where irregular LDPC codes are used, it is necessary to study the design of the bit mapper that matches the LDPC code and QAM symbols in MIMO channel. However, the research related to the design of the bit mapper has been limited to the SISO system. Therefore, this paper defines a new parameter that indicates the VND distribution of MIMO DVB-T2 system and performs the performance analysis according to the parameter which will be helpful for designing a MIMO bit mapper.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.61-69
• /
• 2004

Building stones are used mainly as a material for making decoration and sculpture, and consequently they must have predominant physical properties extensively. Among various physical properties, the coefficient of pore dominates the usefulness of building stones, so the plans were made for establishing the quality classification of building stones with respect to the nature of pore. For this study, bore-hole core samples according to the depth of the biotite granites and the granitic gneiss were applicated. From the related chart between porosity and absorption ratio, Mungyeong granitic gneiss($Gn_1$) shows the widest phase of distribution in the range of measurement values, and the values decrease in the order of Pocheon granite($Gr_2$) and Mungyeong granite($Gr_1$) in the range. The strength of each rock mass varies with the degree of alteration. Also in correlation between compressive strength and tensile strength, the range of measurement values decrease in the order of $Gn_1$, $Gr_2$and $Gr_1$. Porosity is adopted as a representative physical property for establishing the quality classification of building stones, and then relative evaluation was made with regard to various physical properties. From the related chart between porosity(n)-specific gravity(G), absorption ratio(Ab), compressive strength(${\sigma}_{c}$), tensile strength(${\sigma}_{t}$), shore hardness(Hs) and Young's modulus($E_{t}$), standard of each grade is established.

• Korean Journal of Community Nutrition
• /
• v.19 no.2
• /
• pp.111-121
• /
• 2014

Objectives: In this study, perception of body image, eating attitudes and weight control were examined by the degree of obesity using Body Mass Index (BMI). Methods: Out of 420 questionnaires distributed to the female middle school students (aged 12-16 years), 407 were returned (97% response rate) and 395 were analyzed (94% analysis rate). Female students were divided into two groups based on the BMI percentile using the 2007 Korean National Growth Charts. (1) normal weight ($5^{th}$ percentile ${\leq}$ BMI < $85^{th}$ percentile) (2) obese ($85^{th}$ percentile ${\leq}$ BMI) by 2007 Korean National Growth Charts. Satisfaction of self-body shape, risk of disturbed eating attitudes (Eating Attitude Test : EAT-26), and weight control behaviors were examined. Results: Distribution of the subjects by BMI was 74.5% of normal and 25.5% of obese. There were significant differences between self-perceived current body image and self-perceived ideal body image. The dissatisfaction of body image was higher in obese than in normal groups (p<0.001). 51.4% of female students were unsatisfied with their body image, while 2.6% were very satisfied. Among the students unsatisfied with their body image, 150 (52.1%) were of normal weight and 48 (49.4%) were obese. EAT-26 total scores were significantly higher in the obese group ($16.42{\pm}8.23$) compared with normal group ($13.72{\pm}8.10$) (p<0.01). Attempted to weight control were significantly different by the BMI (p<0.001). Conclusions: This study concludes that there was desire to become thinner than current status in female students, even those with normal BMI. Many female students were dissatisfied with their body image and attempted to lose weight. It is harmful to their health and nutritional status if they choose undesirable methods. These findings suggested that there are needs to encourage female students for maintaining healthy weight. A higher score of EAT-26 was associated with dissatisfaction of selfbody image and this may lead to unhealthy behaviors in obese female students.

• Korean Journal of Community Nutrition
• /
• v.13 no.3
• /
• pp.323-333
• /
• 2008

The aim of this study was to measure and compare nutrient intake, anthropometric measurements and serum indices by percent body fat as one of the index of obesity degree in female college students. Additionally we attempted to investigate percentile distribution of fat free mass index (FFMI) and fat mass index (FMI) for developing reference values for these two parameters. The subjects were 91 female college students who were classified to 4 groups according to the percentile of percent body fat (Group1: 25 th < percentile of percent body fat, Group 2 : 25 th ${\le}$ percentile of percent body fat < 50 th, Group 3 : 50 th ${\le}$ percentile of percent body fat < 75 th, Group 4 : percentile of percent body fat ${\ge}$ 75 th). The mean percent body fat and body mass index were 28.2%, $20.5 kg/m^2$ respectively. The mean energy intake was 1707 kcal(81% of KDRIs) and vitamin C, folate, Ca and Zn intake were 73.9%, 54.7%, 79.6%, 97.5% of KDRIs respectively. Most nutrient intake (energy, carbohydrate, cholesterol, fatty acid, Ca, Fe) of G4 was lower than that of G1, G2 and G3. Serum HDL-cholesterol concentration was significantly lower in G4 than G1, G2, G3 and it tended to increase as percent body fat decreased. LDL/HDL, A1 of G4 were significantly the highest among the 4 groups and increased as percent body fat increased. The mean fat free mass index and fat mass index were $14.5 kg/m^2$, $6.0 kg/m^2$ respectively. The criteria of sarcopenic obesity which has been defined as under 25 th percentile of FFMI and below 75 th percentile of FMI were shown $12.8 kg/m^2$, $8.2 kg/m^2$ respectively in this study. In conclusion, we should continue to more systematically research on the studies of new obesity measurement which includes FFMI and FMI as one of the variables. And the public education for weight control that emphasizes both the understanding of body composition and the importance of nutrition balance is also required.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.3
• /
• pp.103-113
• /
• 2018

Tide-surge characteristics of the West/South domestic coasts were analyzed with a tool of EST (empirical simulation technique). As a result, stations of Incheon, Gunsan, Mokpo and Busan are categorized as tide-dominant coasts, while Yeosu, Tongyoung and Busan are as surge-dominant coasts. In the tide-dominant coasts, extreme sea level of less than 50-yr frequency is formed without typhoon-surge, while only 10-yr extreme sea level is formed in the surge-dominant coasts. As the results of casual condition of extreme sea level formation considering the relative degree of surge on tide, the regional characteristics were detected also. Three methods for estimating the design tide level were compared. The AHHW method shows an unrealistic outcomes of the concern of over estimate design. Furthermore, the probability distribution function method has been concerned as causing missing data if a huge typhoon occurs in a neap tide or a low tide. To cope with these drawbacks, the applicability of the EST method is proved to be suitable especially in tide-dominant coasts.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.567-575
• /
• 1999

This study found potential ability to generate electric power using difference in water temperature between sea surface water and deep water in the East Sea which includes the East Sea Proper Water with the temperature less than 1$^{\circ}C$ throughout a year without seasonal variation. To quantify the difference in water temperature between sea surface water and deep water in the East Sea. We computed the annual mean ($^{\circ}C$), the annual amplitude ($^{\circ}C$), the annual phase (degree) and the duration time which showed more than 15$^{\circ}C$ temperature difference from the water temperature data using Harmonic analysis during 1961~1997. The best place for generating electric power in the East Sea seems to be the eastward ocean areas (36$^{\circ}$ 05'N, 129$^{\circ}$ 48'E~36$^{\circ}$ 05'N, 130$^{\circ}$ 00E'E) from Pohang city. The annual mean of the difference in water temperature between sea surface water and 500 m depth was 24$^{\circ}$C at the place to generate electric power in August according to the data of 1961~1997. the maximum duration periods with more than 15$^{\circ}C$ temperature difference were 215 days (5/5-12/10) a year in the place mentioned electricity with a stable plan. In the East Sea coastal areas of the Korean peninsula, the average minimum depth to reach the East Sea Proper Water from surface water is 300 m and fluctuates between 250 m and 350 m throughout a year. Further studies could be needed for the utilization of cold water, such as the East Sea Proper Water for energy conversion.