• Structural Engineering and Mechanics
• /
• v.77 no.2
• /
• pp.197-215
• /
• 2021

Under a severe environment of multiple hazards such as earthquakes and winds, the life-cycle performance of engineering structures may inevitably be deteriorated due to the fatigue effect caused by long-term exposure to wind loads, which would further increase the structural vulnerability to earthquakes. This paper presents a framework for evaluating the lifetime structural seismic performance under the effect of wind-induced fatigue considering different sources of uncertainties. The seismic behavior of a high-rise steel-concrete composite frame with buckling-restrained braces (FBRB) during its service life is systematically investigated using the proposed approach. Recorded field data for the wind hazard of Fuzhou, Fujian Province of China from Jan. 1, 1980 to Mar. 31, 2019 is collected, based on which the distribution of wind velocity is constructed by the Gumbel model after comparisons. The OpenSees platform is employed to establish the numerical model of the FBRB and conduct subsequent numerical computations. Allowed for the uncertainties caused by the wind generation and structural modeling, the final annual fatigue damage takes the average of 50 groups of simulations. The lifetime structural performance assessments, including static pushover analyses, nonlinear dynamic time history analyses and fragility analyses, are conducted on the time-dependent finite element (FE) models which are modified in lines with the material deterioration models. The results indicate that the structural performance tends to degrade over time under the effect of fatigue, while the influencing degree of fatigue varies with the duration time of fatigue process and seismic intensity. The impact of wind-induced fatigue on structural responses and fragilities are explicitly quantified and discussed in details.

• Journal of Environmental Health Sciences
• /
• v.46 no.6
• /
• pp.646-654
• /
• 2020

Objectives: Users of parks or children's play facilities have pointed to pets' bowel movements as the most serious problem when using them. In prior studies, a very low detection rate of parasites (eggs) in sand flooring materials has been found. Even though feces have been identified, no parasites (eggs) have been detected. Method: A standard solution of nitrate nitrogen was used to verify the reliability of a new nitrogen analysis method. The linearity, precision, and accuracy of the nitrate nitrogen analysis method were verified. Using this method, the pollution distribution of the sand flooring material and the degree of pollution at each point were investigated. Results: As a result of the verification of the nitrogen analysis method, the linearity was found to be good at r2=0.999 when distilled water is mixed in a standard substance solution. The standard substance additive solution r2=0.968 was found to be good. Precision represented 0.01 to 0.06% RSD for peak height. The recovery rate was 92.4 to 104.0 percent, indicating high accuracy. According to the same method of analysis, the flooring material sand at a general amusement facility with the largest number of concealed spaces was nitrate nitrogen 6.1 times higher than at the entrance of the playground. Also, in a comparison between clean sand and sandy flooring, the average nitrogen concentration of the sand flooring material was 24.4-167 times higher than pure sand. Conclusions: As such, no parasites (eggs) were detected at all points under investigation, but the sand flooring was exposed to animal fecal contamination. Therefore, the management of nitrogenous components should allow accurate identification of animal fecal contamination so that the timing of sand replacement can be managed hygienically and safely.

• Journal of the Korea Safety Management & Science
• /
• v.22 no.4
• /
• pp.9-15
• /
• 2020

As of 2018, total yield of lettuce and strawberry amounted to 93,543 tons (representing 1.0 percent) and 183,639 tons (2.0 percent), respectively, among total yields worth 9,185,889 tons in South Korea. Lettuce is affected by a combination of numerous elements such as varieties, cultivation methods and pests during each growth phase (Lee et al., 1999). It is mainly cultivated in spring and fall. Especially due to respiration rate after harvest leading to reduced quality and poor storage, maintaining annual supply is unavailable (Jang et al., 2018). With the distribution of new varieties, forcing culture and indoor insulated facilities for plant cultivation during winter, strawberries are produced every year except for late summer and early fall. Due to active respiration, transpiration, soft flesh and high water content, the fruit is vulnerable to go bad and got rotten compared to other fruits. Furthermore, it is difficult to maintain freshness due to the possibility of softening, discoloration and fungi (Lee et al., 2012). In this regard, developing improved storage and package techniques is needed to ensure maintaining quality and safety even just two to three days after harvest. In order to ensure improved quality and safety of strawberries and lettuce after harvest, the present study applied a modified atmosphere packaging (MAP) technology (Mostofi et. al., 2008). Going forward, it compared the quality and safety of the two products while being stored in a way that put them in an MAP-applied container and a plastic container at room temperature and 4 degree Celsius.

• Geomechanics and Engineering
• /
• v.24 no.4
• /
• pp.389-397
• /
• 2021

Pile foundation is a typical form of bridge foundation and viaduct, and large-diameter rock-socketed piles are typically adopted in bridges with long span or high piers. To investigate the effect of a mountain slope with a deep overburden layer on the bearing characteristics of large-diameter rock-socketed piles, four centrifuge model tests of single piles on different slopes (0°, 15°, 30° and 45°) were carried out to investigate the effect of slope on the bearing characteristics of piles. In addition, three pile group tests with different slope (0°, 30° and 45°) were also performed to explore the effect of slope on the bearing characteristics of the pile group. The results of the single pile tests indicate that the slope with a deep overburden layer not only accelerates the drag force of the pile with the increasing slope, but also causes the bending moment to move down owing to the increase in the unsymmetrical pressure around the pile. As the slope increases from 0° to 45°, the drag force of the pile is significantly enlarged and the axial force of the pile reduces to beyond 12%. The position of the maximum bending moment of the pile shifts downward, while the magnitude becomes larger. Meanwhile, the slope results in the reduction in the shaft resistance of the pile, and the maximum value at the front side of the pile is 3.98% less than at its rear side at a 45° slope. The load-sharing ratio of the tip resistance of the pile is increased from 5.49% to 12.02%. The results of the pile group tests show that the increase in the slope enhances the uneven distribution of the pile top reaction and yields a larger bending moment and different settlements on the pile cap, which might cause safety issues to bridge structures.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_3
• /
• pp.1681-1690
• /
• 2020

A scanning lidar system has been developed. The system has two wavelength observation channels of 532 and 1064 nm and is capable of 360-degree horizontal scanning observation. In addition, an analysis method that can classify the measured particle as an indicator of coarse-mode particle (PM2.5-10) and an indicator of fine-mode particles (PM2.5) and calculate the mass concentration of each has been developed by using the backscatter coefficient at two wavelengths. It was applied to the data calculated by observation. The mass concentrations of PM10 and PM2.5, which showed a distribution of 22-110 ㎍/㎥ and 7-78 ㎍/㎥, respectively, were successfully calculated in the Ulsan Onsan Industrial Complex using the developed scanning lidar system. The analyzed results showed similar values to the mass concentrations measured on the ground around the lidar observation area, and it was confirmed that high concentrations of 80-110 ㎍/㎥ and 60-78 ㎍/㎥ were measured at points discharged from factories, respectively.

• Journal of Digital Convergence
• /
• v.19 no.3
• /
• pp.47-54
• /
• 2021

This study shows that consumers' attitudes and behaviors are rapidly changing due to the COVID-19 outbreak in a situation where consumption patterns are already changing due to demographic changes such as an increase in the number of single-person households and dual-income couples. To this end, the results of an online survey conducted on 500 panels of Nielsen Korea were used in this study. In particular, consumers were divided into two generation groups (Generation Z vs. Millennial) and analyzed and presented changes in consumption activities and food purchasing behaviors changed by COVID-19. As a result, the existing online distribution trend has been strengthened, and its impact has been amplified by COVID-19. These changes also resulted in different consumption behaviors depending on the degree of concern for COVID-19 by generation. Based on the results of this study, it turns consumers' behavioral changes into new opportunities, focusing on the accelerating a new 'contactless' lifestyle, which will provide managerial implications for the food industry's response strategies in relation to the theoretical significance and in practice.

• Journal of Conservation Science
• /
• v.38 no.1
• /
• pp.45-54
• /
• 2022

This study examined the production technique of bracket murals in Daeungjeon Hall, Gaeamsa Temple by conducting a analysis of their wall structure, material characteristics, and painting layers. Wall was a single-branch structure with support layer, middle layer, finishing layer, and painting layer. The support layer, middle layer and finishing layer, were produced by mixing sand (quartz, feldspars etc.), and loess. The ratio of above medium sand to below fine sand was approximately 0.7 : 9.3 in the support layer, 4 : 6 in the middle layer and 6 : 4 in the finishing layer, which had a more percentage of above medium sand than the support layer. The analysis of the painting layer showed that natural soil pigment was used to establish a relatively ground layer of up to 50 ㎛, and pigments such as Lead sulfate, atacamite and mercury sulfide were painted on top of the layer. This study's results confirmed that the bracket mural paintings in Gaeamsa Temple are within the category of the production style of murals during the Joseon period. However, the points that the middle layer was formed several times, the significant difference in particle size distribution between the wall, and the absence of chopped straw in the support layer are a feature of bracket mural paintings in Gaeamsa Temple. These properties of murals as material and structure may be viewed for correlation with the degree of damage to wall structure of mural painting and would serve as an important reference to diagnosis the conservation conditions of murals or prepare conservation treatments.

• The Journal of Asian Finance, Economics and Business
• /
• v.10 no.2
• /
• pp.153-161
• /
• 2023

This study's principal goal is to find the interrelation between transparency & disclosure (TD) and the healthcare sector's firm valuation (FV). The paper uses the market-to-book (MTB) ratio and market capitalization as proxies, where sales measure act as a control variable. Dynamic panel data regression (PD) is the method applied for analyzing data. Data pertains to 10 healthcare companies gathered over five years (2016-2020). Results imply that TD has a negative and significant influence on the FV, where market capitalization acts as a proxy for valuation. This association indicates that a greater degree of TD diminishes FV. TD is also reported to have a negative and insignificant association with MTB. Therefore, TD does not influence FV. The findings of this paper have significant practical implications. Results can help policymakers determine mandatory disclosure levels that are not detrimental to the healthcare sector. Managers and analysts must also analyze the dimensions of disclosure that can negatively impact the firm's valuation and make decisions regarding TD accordingly. This is the first study to assess the influence of TD on the FV of the Indian healthcare sector, which makes it unique. This study is limited to the healthcare sector, which is its shortcoming.

• Journal of Periodontal and Implant Science
• /
• v.51 no.6
• /
• pp.409-421
• /
• 2021

Purpose: The aim of this study was to compare the prevalence and bacterial load of 6 main periodontal pathogens between pairs of periodontal patients with and without type 2 diabetes mellitus. Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans genotypes were also investigated. Methods: Twenty patients affected by chronic periodontitis and type 2 diabetes were retrospectively selected and matched to 20 patients without diabetes on the basis of the degree and severity of periodontal disease. Microbiological data of subgingival biofilms were analysed and compared for the examined pathogens: A. actinomycetemcomitans, P. gingivalis, Prevotella intermedia, Treponema denticola, Fusobacterium nucleatum, and Tannerella forsythia. Results: The pairs were balanced in terms of demographic and clinical parameters, except for bleeding on probing and suppuration. In the microbiological test sites (4 for each patient), the mean probing pocket depth was 6.34±1.63 mm in patients with diabetes and 6.41±1.78 mm in patients without diabetes. No significant difference between pairs in the prevalence of P. gingivalis or the distribution of its genotypes was recorded. Patients with diabetes had a significantly greater amount of total bacterial load, P. gingivalis, T. denticola, T. forsythia, and F. nucleatum (P<0.05). Moreover, patients with diabetes had a higher number of sites with a greater cell count than patients without diabetes. When compared to the total bacterial load, only T. forsythia maintained its relative load in patients with diabetes (P=0.001). Conclusions: This retrospective matched study supports the hypothesis that microbiological differences exist among periodontal patients with and without diabetes mellitus.

• Fashion & Textile Research Journal
• /
• v.24 no.4
• /
• pp.386-398
• /
• 2022

This study was conducted to corroborate the factors that influence consumer characteristics and technology acceptance on online luxury platforms, which are rapidly emerging as distribution channels for luxury brands. To this end, the relationship between the degree of technology acceptance and behavioral intention of fashion consumers on online luxury platforms and the effect on specific factors such as age and gender was investigated to see if there was a difference in behavior and use behavior. A survey was conducted on Korean consumers between the age of 20 and 40 who have used online luxury platforms and then, a statistical analysis was conducted. As a result of the study, performance expectancy and facilitating conditions, hedonic motivation, price value, and habit were found to have a significant effect on platform behavioral intention, but effort expectancy and social influence did not have a significant effect. Additionally, both facilitating conditions and habit were found to have a directly significant effect on the platform use behavior, and it was confirmed that the platform behavior intention also had a significant effect on the use behavior. As a result of confirming the moderating effect of gender and age, there was no difference based on gender, but only the relationship between price value and behavioral intention was found to have a moderating effect. It is hoped that domestic online luxury platforms will grow into channels with distinct characteristics and continue to develop in the luxury market by utilizing specific affect factors of this study.