• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.4
• /
• pp.627-646
• /
• 1997

In order to find the degree of osseointegration at bone-implant interface of clinically successful implants, models including the 3.75mm wide, 10mm long screw type $Br{\aa}nemark$ implant as a standard and cylinder, 15mm long, 5.0mm wide, two splinted implants, and implants installed in various cancellous bone density were designed. Also, the amount of load and material of prostheses were changed. The stress and minimum contact fraction were analyzed on each model using three-dimensional finite element method(I-DEAS and ABAQUS version 5.5). The results of this study were as follows. 1. 10mm long, 3.75mm diameter-screw type implant had $36.5{\sim}43.7%$ of minimum contact fraction. 2. Cylinder type implant showed inferior stress distribution and higher minimum contact fraction than screw type. 3. As implant length was increased, minimum contact fraction was increased a little, however, maximum principal stress was decreased. 4. Implants with a large diameter had lower stress value with slightly higher minimum contact fraction than standard screw type. 5. Two splinted implants showed no change of minimum contact fraction. 6. The higher bone density, the lower stress value. 7. The material of occlusal surface had no effect on the stress of the bone-implant interface.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.2
• /
• pp.293-301
• /
• 1998

The purpose of this study was to investigate the effects of load on root that was applied to edentulous area in three simulated situation, in each case the guiding planes of abutment were right vertical, 95 degrees, or 100 degrees to residual ridge. The 2-dimensional finite element method was used and the finite element model was prepared as fellows. Right mandibular 1st and 2nd molar was lost and the 2nd premolar with distal rest was used as primary abutment which had three different degrees of guiding plane. Then 150N of compressive force was applied to central fossae of the 1st and 2nd molars and von Mises stress and displacement was measured. The results were as follows; 1. Irrespective of slopes of guiding planes, the stress was concentrated on mesial side of root apex and distal side of coronal portion of root, in particular on junction with distal alveolar bone. As slopes of guiding planes were increased. stress on root and compact bone surrounding abutment was increased but no considerable effect was seen on compact bone of residual ridge. 2. Distal side of coronal portion of root limited by periodontal ligament was displaced distally and mesial side of apical portion was mesially. With slope of guiding plane increasing, the pattern of displacement was similar with one another but the quantity was increased. 3. Both abutment & alveolar bone were displaced downward and root of abutment, especially distal side of coronal portion, was displaced severely. As the guiding plane was tiffed more mesially over $90^{\circ}$, the degree of displacement was also increased.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.5
• /
• pp.67-72
• /
• 2008

The film cooling effectiveness on a flat plate measured by pressure sensitive paint technique. Six film cooling hole were fabricated on a flat plate with 30 degree angle with respect to the surface and three blowing ratios of 0.5, 1, and 2 were tested. Results showed that PSP technique successfully evaluated the distribution of film cooling effectiveness and showed similar results with references. The film cooling effectiveness near the film cooling holes was higher for lower blowing ratio case. As the blowing ratio was increased, the film cooling effectiveness near the film cooling hole decreased due to the lift off of the coolant. At far downstream, the film cooling effectiveness for higher blowing ratio was higher due to the coolant reattachment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.4
• /
• pp.235-241
• /
• 2016

Three different transplanting dates for two rice cultivars grown in Daegu, Republic of Korea, were examined to identify the changes in growth, rice quality, and characteristics of amylopectin. An early transplanting date caused a reduction in the number of panicles in both rice cultivars compared to that in the optimal and late transplanting dates. The 1000-grain weight in the two rice cultivars was significantly increased in the late transplanting date. The rice cultivar tolerant to high temperatures, Donganbyeo, exhibited the lowest milky grain rate in the late transplanting date. The highest rate of head grain was observed in the late transplanting date in both rice cultivars. Regarding the pattern of pasting properties, peak viscosity increased with delayed transplanting dates. With respect to changes in the amylopectin branch-chain length distribution, the amylopectin structure of the translucent Dongan rice cultivar transplanted on April 25 was characterized by a significant increase in A chains with DP > 12, and a decrease in long chains $DP{\geq}37$ compared to that transplanted on June 25. In contrast, the amylopectin structure of the chalky Dongan rice cultivar transplanted on April 25 exhibited further decrease in 13 < DP < 19 than that transplanted on June 25. In the Ungwang rice cultivar, the amylopectin structure of the translucent Ungwang rice cultivar transplanted on April 25 and June 25 was characterized by a significant decrease in the lengths of total amylopectin chains. Furthermore, the amylopectin structure of the chalky Ungwangbyeo rice cultivar transplanted on April 25 was characterized by a significant increase in 7 < DP < 30, while a significant decrease was observed in that transplanted on June 25. These results indicate that the amylopectin structure is altered by different transplanting dates depending on the characteristics of the rice cultivar.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.3
• /
• pp.357-368
• /
• 2009

The purpose of this study was to examine the state of dental treatment among disabled patients by the type of disability. After the medical records of 531 disabled patients who received treatment at the pediatric dentistry in K university hospital, the following findings were given: 1. As for age distribution by year, the rate of patients aged 10 or down rose to 42.5 from 5.1 percent, and the 16-20 age group increased from 16.7 to 24.8 percent. But the rates of patients aged between 11 and 15 and aged 21 and up were on the rise(p<.05). 2. Concerning the type of disability by year, there was an increase in the number of patients with brain lesions, mental retardation, developmental disorder and Down's syndrome(p<.05). As to the number of dental caries by the type of disability, the patients with heart diseases had the most dental caries that numbered 8.49, followed by Down's syndrome, metal retardation, brain lesions, the other disabilities and developmental disorder. 3. In relation to dental treatment experiences by the type of disability, the patients with developmental disorder(57.5%) received the most dental treatment, followed by mental retardation, the other disabilities, brain lesions, Down's syndrome and heart diseases(p<.05). 4. Regarding general anesthesia experience by the type of disability, the patients with mental retardation(31.6%) were put under general anesthesia the most, followed by developmental disorder, brain lesions, the other disabilities, heart diseases and Down's syndrome(p<.05). In conclusion, nationwide efforts to nurture separate dental personnels responsible for the disabled, to expand relevant facilities and to improve the health care insurance are required to promote the oral health of disabled children.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.5
• /
• pp.92-101
• /
• 2010

This study evaluated the structure and quality of osteoporotic vertebral bone. To induce osteoporosis, eight rats were ovariectomized (OVX). All rats were divided into two groups (Normal group: 4, OVX group: 4). Total lumbar vertebrae for each rat were scanned by in-vivo ${\mu}CT$ at 0, 4 and 8 weeks. Morphological characteristics (BV/TV, Tb.Th, Tb.N, Tb.Sp and SMI) were calculated by in-vivo ${\mu}CT$ image analyzer. Three dimensional finite element models were analyzed to investigate bone strength of OVX and Normal groups. Moreover, the elastic modulus was quantitatively analyzed to evaluate the quality changes of osteoporotic bone. In the OVX group, BV/TV, Tb.Th and Tb.N were significantly decreased at all the lumbar over time (p<0.05). We also investigated a contrary tendency in Tb.Sp and SMI, compared to the above results in each group. A degree of alteration of mechanical characteristics in OVX group was decreased over measuring time (p<0.05). Bone quality presented by distribution of elastic modulus was improved in the Normal group more than OVX group. The findings of the present study indicated that both bone structure and quality of whole lumbar could be tracked and detected by analyzing the morphological and biomechanical characteristics of bones, based on a nondestructive method.

• Tunnel and Underground Space
• /
• v.21 no.6
• /
• pp.526-535
• /
• 2011

A new failure criterion for concrete, which takes into account the effect of the intermediate principal stress, is proposed. The new criterion, which takes the advantages from both the Mohr-Coulomb and the Willam-Warnke criteria, is linear in the meridian section, while its octahedral section is always smooth and convex. Fitting the triaxial compression data with the proposed criterion shows the high performance of the new criterion. A new formula for the factor of safety of concrete is defined based on the new failure criterion and it is employed in the stability analysis of the concrete plugs installed in the pilot plant. The new formula for the factor of safety measures the degree of closeness of a stress state to the failure surface in the octahedral plane. Finally, 3-D finite element analyses of pilot plant were carried out to obtain the stress distributions in the plugs. Then, the stress distributions are converted to those of factor of safety by use of the proposed formula. Based on the distribution of factor of safety in the concrete plugs, the stability of the tapered and wedge-shaped plugs is evaluated.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.3
• /
• pp.55-66
• /
• 2012

This study was carried out to investigate vegetation of Rhododendron mucronulatum habitat in Mt. Biseul to recommend basic information for synecological characteristics and management methods. The survey was carried out from May to July, 2011 and totally 46 vegetation data including 42 families 93 genera 108 species 16 varieties and 5 forma were collected and analyzed. Among the investigated 129 taxa, the numbers of rare plant resources were summarized as 19 taxa; The rare plants designated by Korea Forest Service, the specific plants by floristic region and the endemic plants were listed as 3 taxa, 15 taxa and 4 taxa, respectively. Rhododendron mucronulatum habitat of Mt. Biseul was classified into 3 plant communities (Carex lanceolata-Rhododendron mucronulatum community, Potentilla dickinsii-Selaginella rossii community, Carex lanceolata-Quercus mongolica community). Carex lanceolata-Rhododendron mucronulatum community was subdivided into Tripterygium regelii subunit and Miscanthus sinensis for. purpurascens subunit by human interference degree. And synecology, syndynamics, synchorology of these plant communities were identified, and Site-species ordination analysis by Principal Coordinate Analysis (PCoA) reflected that human impact, soil moisture condition were main ecological factors determining the distribution pattern of classified plant communities. Therefore these plant communities correspond to quite distinctive 4 habitat types : unstable-dry type=Miscanthus sinensis for. purpurascens subunit, unstable-moderate type=Tripterygium regelii subunit, stable-dry type=Potentilla dickinsii-Selaginella rossii community, stable-moderate type=Carex lanceolata-Quercus mongolica community. Finally, through the vegetational diagnosis, proper management methods such as a limit on the access of visitors, planting of native woody plants after removing unwanted vines or grass were suggested.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.6
• /
• pp.131-142
• /
• 2009

The purpose of this study is to detect the protection area around the Geum-buk and Geum-nam Mountains for making a sustainable ecological network. The protection area in the Geum-buk and Geum-nam Mountains was analyzed by using spatial data and a field survey for landscape conservation purposes. A survey scope was fixed using digital elevation model, and the protection area was finally determined based on the parcel map called as the Korea Land Information System (KLIS). Here we have several conclusions in this study. First, spatial data used in this study were a map of ecological and natural degree (MEND), forest distribution map, elevation map, slope map, and several maps for the protection area assigned by laws regarding to the natural resources. Second, we used 4 alternatives to determine the best choice for showing the ecological network in the study area. One alternative (alt. 3) of 4 ones was finally chosen as the best condition for making the ecological network. The condition in elevation and slope was a little modified to a lower level in alt, 3. The result derived from alt, 3 reflected the continuity and connectivity in the ecological network and we estimate that the protection area can protect the core area using the buffer zone around the ecological network. Finally the parcel-based protection area in the Geum-buk and Geum-nam Mountains had $493.92km^2$ of the core area, and $233.99km^2$ of the buffer zone, which means the parcel-based protection area increased by $97.76km^2$ in the core area, but decreased by $76.61km^2$ as of in the topographical map.

• Parasites, Hosts and Diseases
• /
• v.47 no.4
• /
• pp.369-375
• /
• 2009

Diphyllobothrium nihonkaiense was first described by Yamane in 1986 but the taxonomical features have been obscure due to lack of critical morphologic criteria in its larval and adult stages. In Korea, this tapeworm had long been known as Diphyllobothrium latum. In this study, we observed 62 specimens collected from Korean residents and analyzed them by morphological features and nucleotide sequences of mitochondrial cox1 gene as well as the ITS1 region. Adult tapeworms were examined after carmine or trichrome stain. Longitudinal sections of the gravid proglottids showed an obtuse angle of about 150 degree between the cirrus sac and seminal vesicle. This angle is known as a major differential point compared with that of D. latum. Nucleotide sequence differences between D. latum and the specimens from Koreans represented 17.3% in mitochondrial DNA cox1 gene. Sequence divergence of ITS1 among 4 Korean isolates was 0.3% and similarity was 99.7% with D. nihonkaiense and D. klebanovskii. All of the Korean specimens analyzed in this study were identified as being D. nihonkaiense (n = 62). We propose its Korean name as "Dong-hae-gin-chon-chung" which means 'long tapeworm of the East Sea' for this newly analyzed diphyllobothriid tapeworm in Korea.