• Applied Biological Chemistry
• /
• v.40 no.3
• /
• pp.232-237
• /
• 1997

Soybean plants inoculated Bradrhizobium japonicum MN 110 were grown in outdoor perlite pots with nitrogen free nutrient solution containing 1.0 mM-P(control) and 0.05 mM-P(stress) and harvested at 28, 35, 42 and 49 days after transplanting (DAT) to examine the effect of phosphorus deficiency on ureide concentration of and distribution to diffrent plant organ in nitrogen fixing soybean plant during the vegetative growth. Total dry mass of control plants increased 8.9 fold and that of phosphorus deficient plant increased 2.7 fold during the experimental period. Phosphorus deficiency reduced total phosphorus and nitrogen accumulation by 80%,40% respectively, at 28 DAT and 93%, 84%, respectively, at 49 DAT. Nitrogen concentration was reduced by phosphorus deficiency in all tissues with leaf and stem tissues affected to a greater degree than nodule and root tissues at every sampling date. Phosphorus deficiency significantly reduced soluble reduced-N and ureide-N concentration in leaf and stem but did not affect those in root. The proportion of soluble reduced-N in leaf was reduced from 60% to 50% but increased from 10% to 20% in the roots. The proportion of ureide-N in leaf of control plants was higher than that in phosphorus deficient plants, whereas, roots of phosphorus deficient plants contained a higher propotion of ureide-N than those of control plants. These indicated that phosphorus deficiency not only inhibit nitrogen fixation of nodules but also restrict the translocation of fixed nitrogen out of the root system into the xylem.(Received April 4, 1997; accepted May 2, 1997)

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.3
• /
• pp.3-15
• /
• 1986

This study was carried out to investigate the drying rate and drying defects of Populus euramericana using the SDR (Saw-Dry-Rip) process. Flitches for SDR process were rough edged for compact kiln stacking, and then kiln-dried to 10 percent moisture content with dimensions in the same run, using the kiln-drying schedule ($T_8-F_4$) recommended by Rasmussen. The results obtained were as follows: 1. Drying rate of dimensions was slower than that of flitches. 2. Final moisture content and moisture distribution of dimensions were lower than those of flitches. 3. Average bowing, cupping, crooking, and twisting were reduced 20 percent, 25 percent, 54.9 percent, and 13.4 percent by SDR process respectively. 4. Bowing and cupping were more severe in dimensions from the area near the pith than in those from the area near the bark, and for crooking and twisting the reverse was true. 5. Surface checking of dimensions developed less than that of flitches and end checking of dimensions was similar to that of flitches. 6. Honeycomb, thickness shrinkage, and collapse of dimensions were similar to those of flitches. 7. The degree of casehardening of dimensions was higher than that of flitches.

• Ecology and Resilient Infrastructure
• /
• v.2 no.1
• /
• pp.80-92
• /
• 2015

Some of alien plants, which were introduced from foreign countries, have caused problems in Korea. Invasion of these alien plants in the ecosystem threatens the habitat of endemic species, reducing biodiversity, and causing a disturbance in the ecological system. In urbanized areas of campus universities, a diverse range of organisms were found and a comparison between the sites, near roads or housing sites were made because the campuses provided a large biotope. Although the campus had been exposed to interferences like gardening, it was also a place for most organisms to live in an active floating population due to free access. This research investigated the flora of alien plants that appeared in Beakseok University, Sangmyung University, Hoseo University and Dankook University, and relationship between the distribution of alien plants and the campus and green areas and distance from the highway. The total number of plant species and naturalized species found in the four universities was 189 and 43 species. Those of Dankook University were 136 and 35 species, Hoseo 108 and 25 species, Sangmyung 103 and 31 species, and Baekseok 97 and 26 species, respectively. The abundance of natural plants for each respective university tended to be higher as it became closer to the highway. Also, the closer the walking distance to the university, the greater the tendency for the degree of similarity to be higher. As a result, we may conclude that the distribution of alien plants and anthropogenic activities may be closely related.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.493-500
• /
• 2012

The previous geoid model developed in early 2000s shows 14cm level of precision due to the problems on distribution, and quality of the land gravity and GPS/Leveling data. From 2007, the new land and airborne gravity data as well as GPS/Leveling data having high quality and regular distribution has been obtained. In 2011, a new gravimetric geoid model has been constructed with precision of 5.29cm which was improved about 27% comparing to the previous model. However, much more land gravity data has been collected at the control point, bench marks and triangulation points since 2010. Also, GPS/Leveling data having 10km spacing over whole country has been obtained through the project which is for the construction of new control points. In this study, new gravimetric geoid has been calculated based on the all available gravity data up to present. The geoid height shows the range from 18.05m to 32.70m over whole country and its precision is 5.76cm. The degree of fit and precision of hybrid geoid model are 3.60cm and 4.06cm, respectively. At the end, 3.35cm of the relative precision in 15km baseline has been calculated to confirm its practical usage. Especially, it has been founded that regional bias occurred at the Kangwon and coastal area due to problems on the leveling data. Also, some inland points show inconsistent large difference which needs to be verified by analyzing the unified control points results.

• Journal of KIISE:Software and Applications
• /
• v.34 no.1
• /
• pp.1-10
• /
• 2007

This paper proposes a new indexing mechanism for MPEG-7 visual descriptors, especially Dominant Color and Contour Shape descriptors, that guarantees an efficient similarity search for the multimedia database whose visual meta-data are represented with MPEG-7. Since the similarity metric used in the Dominant Color descriptor is based on Gaussian mixture model, the descriptor itself could be transform into a color histogram in which the distribution of the color values follows the Gauss distribution. Then, the transformed Dominant Color descriptor (i.e., the color histogram) is indexed in the proposed indexing mechanism. For the indexing of Contour Shape descriptor, we have used a two-pass algorithm. That is, in the first pass, since the similarity of two shapes could be roughly measured with the global parameters such as eccentricity and circularity used in Contour shape descriptor, the dissimilar image objects could be excluded with these global parameters first. Then, the similarities between the query and remaining image objects are measured with the peak parameters of Contour Shape descriptor. This two-pass approach helps to reduce the computational resources to measure the similarity of image objects using Contour Shape descriptor. This paper also proposes two integration schemes of visual descriptors for an efficient retrieval of multimedia database. The one is to use the weight of descriptor as a yardstick to determine the number of selected similar image objects with respect to that descriptor, and the other is to use the weight as the degree of importance of the descriptor in the global similarity measurement. Experimental results show that the proposed indexing and integration schemes produce a remarkable speed-up comparing to the exact similarity search, although there are some losses in the accuracy because of the approximated computation in indexing. The proposed schemes could be used to build a multimedia database represented in MPEG-7 that guarantees an efficient retrieval.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.395-411
• /
• 1993

The purpose of this study was to examine the clear concept of the designs for cavity preparations. Among the several parameters in cavity designs, profound understanding of isthmus width factor would facilitate selection of the appropriate cavity preparation for a specific clinical situation. In this study, the cavities were prepared on maxillary first premolar and filled with gold inaly. A two - dimensional model was composed of 1037 - node triangle elements. In this model, isthmus was varied in width at 1/4, 1/3 and 1/2 of intercuspal width and material properties were given for four element groups, i.e., enamel, dentin, pulp and gold. The 500N occlusal load varied in direction and it was examined using three types of load : concentrated load, divided load and distributed load. The models were also examined with empty cavities using the devided load and distributed load. These models were analyzed the displacement and strees distribution by the two - dimensional Finite Element Method. The results were as follows : 1. All experimental models which filled with gold inlay after cavity preparation were similar direction of displacement with control model under same load type. But in the models with empty cavities, as isthmus width was wider, the degree of displacement was increased at same load type. 2. Among the experimental models which were filled with gold inaly after cavity preparation, the model II showed the least stress concentration under concentrated load and divided load. But in the models with empty cavities, the model III showed the largest stress concentration and tooth fracture is expected regardless isthmus width. 3. All experimental models showed similar displacement pattern beneath restorative material under a concentrated load. In the models with empty cavities, a divided load resulted in a lingual displacement of the lingual cusp, but a distributed load resulted in a buccal displacement of the lingual cusp. In regard to the above results, the restored models were stronger than empty models in respect to the bending moment and tensile stress. The empty models are expected to fracture regardless isthmus width. The safest isthmus width was 1/3 of intercuspal distance, which showed the least stress concentration in respect to the effect of stress distribution.

• Korean Security Journal
• /
• no.15
• /
• pp.199-219
• /
• 2008

This study analyzed the contents of the 225 papers included in Korea Security Science Association during the decade -from 1997 to 2007. This study was classified the study method qualitative. First, characteristic of researchers(distinction of sex, distinction of academic degree, regional distribution, one's position and regional distribution, participants per paper). Second, study trends classified by fields of study(where receiving research expenses support or not, change of study subject). Third, study trends classified by methods of study(study method by year, study method by study subject, statistical analysis by year) were subdivided. Analysis shows that there are some shortcomings on the research of Korea Security Science Association as compared with other fields. However, it shows advanced trends for example participation in different study field, evenly distributed regional study participation, variety trial of analysis method. Then again, the distinction of sex, one's position, too much emphasis on independence research, vulnerability about support of research expenses, emphasis on study fields and study trends wandering from industrial circles are getting deeper In study methods, generalized research form such as document study and phenomenon technical case study is limited so deduction of kernel result is not thoroughgoing enough as well as it shows the trend that limits to duplicate and generalized proposal technic.

• The Korean Journal of Applied Statistics
• /
• v.33 no.1
• /
• pp.47-59
• /
• 2020

In this paper, we present the longitudinal Markov binary regression model with t-link function when its transition order is known or unknown. It is assumed that logit or probit models are considered in binary regression models. Here, t-link function can be used for more flexibility instead of the probit model since the t distribution approaches to normal distribution as the degree of freedom goes to infinity. A Markov regression model is considered because of the longitudinal data of each individual data set. We propose Bayesian method to determine the transition order of Markov regression model. In particular, we use the deviance information criterion (DIC) (Spiegelhalter et al., 2002) of possible models in order to determine the transition order of the Markov binary regression model if the transition order is known; however, we compute and compare their posterior probabilities if unknown. In order to overcome the complicated Bayesian computation, our proposed model is reconstructed by the ideas of Albert and Chib (1993), Kuo and Mallick (1998), and Erkanli et al. (2001). Our proposed method is applied to the simulated data and real data examined by Sommer et al. (1984). Markov chain Monte Carlo methods to determine the optimal model are used assuming that the transition order of the Markov regression model are known or unknown. Gelman and Rubin's method (1992) is also employed to check the convergence of the Metropolis Hastings algorithm.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.4
• /
• pp.471-477
• /
• 2014

Purpose: We have analyzed the transmittance distribution of the ocular lens using local transmittance microscope to investigate the optical homogeneity of the lens. Methods: The transmittance of the laser which is focused on the surface of the ocular lens was measured by using the photo-detector and lock-in amplifier and analyzed. Multi-coated, uncoated, and progressive lenses were analyzed. Results: In the measurement of the progressive lens and a physical stimulated lens, local transmittance microscopy analysis showed a high degree of match with the measurement results through the optical microscope. In addition, the average value of the transmittance is reduced and the standard deviation was increased in the presence of optical defects. In unstimulated lens, there are a large impact on transmittance whether the anti-reflective coating is presence or absence in both the local transmittance microscopy and general transmittance analysis. Conclusions: The distribution of the transmittance measured by local transmission microscopy were changed when the various stimulus is applied to the lenses. These analyzes by local transmission microscopy can be utilized as a way to evaluate or determine the uniformity of the coating film or lens.

• Journal of Distribution Science
• /
• v.14 no.9
• /
• pp.73-83
• /
• 2016

Purpose - Previous studies have not paid attention to global self-corporate brand congruity and affective approach from the viewpoint of global self. This study explored an inducement of gratitude that, under the circumstance of corporate association, consumers feel toward corporate's responsible activities, pride related to corporate's ability, and global self congruity. Current researches also have examined positive behavior effects of global self-corporate brand congruity and the feelings on corporate products. Research design, data, and methodology - This research theoretically reviewed that corporate ability and social responsibility association would influence global self-corporate brand congruity, that corporate ability association could induce consumers' sense of pride, and that social responsibility association might induce gratitude. This study, furthermore, examined theoretically whether global self-corporate brand congruity, pride and gratitude could make consumers behave positively toward corporate products, and developed hypotheses. For the empirical analysis with the questionnaires, 231 employees and common people completed the questionnaires, and structural equation model of AMOS 18.0 was used. Results - From the empirical analysis, the outcomes are as followings. First, corporate ability association makes consumers feel proud. Second, corporate social responsible association makes consumers feel grateful. Third, both corporate ability association and social responsibility association let consumers be aware of global self-corporate brand congruity. Fourth, being conscious of each of pride, gratitude and global self-corporate brand congruity prompts consumers to behave positively toward corporate products. Fifth, mediation effects of pride and the congruity in the roles of corporate ability association on the positive behavior, and those of gratitude and the congruity in the roles of corporate social responsible association on the positive behavior are identified. Conclusions - Based on the results, it can be said that a marketing manager should endeavor to make consumers associate the corporate ability and social responsibility. However, the degree of consumers' feelings such as pride and gratitude can differ according to their cultural backgrounds. It is, therefore, needed to be explored by the types of feelings that can be caused more from the difference in cultural backgrounds by corporate association, and to be investigated differently and positively with behavioral effects on the corporate's products between the types.