• Korean Journal of Organic Agriculture
• /
• v.25 no.4
• /
• pp.861-873
• /
• 2017

The present study was conducted to investigate the developmental characteristics of Propylea japonica Thunberg (Coleoptera : Coccinellidae), a predator of aphids under laboratory conditions. The development times of the egg and immature stages of Propylea japonica were investigated at ten constant temperatures(15, 17.5, 20, 22.5, 25, 27.5, 30, 32.5, 35 and $38{\pm}1^{\circ}C$; 14L:10D; $60{\pm}5%$ RH). Development time was longest at $17.5^{\circ}C$. The developmental periods of P. japonica from the time of egg oviposited to adult emergence was 36.9 days at $17.5^{\circ}C$, and it decreased ash temperature increasing. Threshold temperature of development and degree days of the P. japonica from egg to adult were $11.9^{\circ}C$ and 196.0 respectively. The Briere 2 and Lactin 2 modes were best fitted for all development stages. The distribution of completion of each development stage was explain relatively well that 2-parameter, 3-parameter and Logistic model except egg and pupal stage.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.145-150
• /
• 2000

Out-of-sphericity is degree of deformation of an air bearing sphere deviated from a perfect sphere. This paper investigates numerically the effect of out-of-sphericity error on the radial stiffness of an air bearing Three types of out-of-sphericity modes are considered. in this study the stiffness is calculated from pressure distribution at the bearing surface which is obtained by solving th Reynolds equation. in some cases large out-of-sphericity errors are found to improve the stiffnesses of air bearings. This implies that an air bearing of perfect hemispheres is not necessarily of the best performance. Thus much labor and cost in manufacturing air bearings can be saved, In addition the radial stiffness of an air bearing depends greatly on the application direction.

• Progress in Superconductivity
• /
• v.6 no.2
• /
• pp.108-112
• /
• 2005

We investigated temperature behavior of superconducting fault current limiters (SFCLs) during quenches. Knowledge on temperature behavior during quenches is important to the design of SFCLs, because the temperature of SFCLs is related to their stability. SFCLs were fabricated by patterning $Au/YBa_2Cu_3O_7$ thin films grown on sapphire substrates into meander lines by photolithography. A gold film grown on the back side of the substrate was patterned into a meander line, and used as a temperature sensor. The front meander line was subjected to simulated AC fault currents, and the back line to DC current. They were immersed in liquid nitrogen during the experiment for effective cooling. Overall, temperature at the back side of SFCLs was close to that at the front side. It was closer at the beginning of faults, and at lower applied voltages. Temperature distribution at the back side was even except at the edge, as at the front side. These results tell that the whole SFCL was heated to similar degree during quenches, and that effective cooling of SFCLs at the back side is as important to the stability of SFCLs as at the front side. The results could be explained with the concept of heat transfer within the film.

• Communications for Statistical Applications and Methods
• /
• v.16 no.4
• /
• pp.557-572
• /
• 2009

This article examines the financial soundness of the government employee pension system(GEPS). We use a model that simplifies the existing GEPS considering survival probability distribution of the life of employees. Two approaches were selected for the research: One is the expected net value of pension for an individual employee and the other is the default probability of the system from Monte-carlo simulation. The outcome reveals following three possibilities. First of all, the individual expected net value presents unfairness between the retiree's premium and the benefit he/she receives. Secondly, the Monte-carlo simulation suggests that the default is highly likely to happen in less than 30 years. Thirdly, the governmental reserve and subsidy for GEPS should be required to a certain degree in order to alleviate the probability of default less than 5 percent for the next 30 years.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.75-80
• /
• 2002

Enormous volumes of mining wastes from the abandoned and closed mines are disposed without a proper treatment at Southeastern part of Kangwon Province. Erosion of these wastes contaminates soil, surface water, and sediments with heavy metals. Objectives of this research were to fractionate heavy metals in the mine waste and to assess the potential S. P. A. G.(Soil Pollution Assesment Guidance) of each metal fraction. Mine wastes analyzed for physical and chemical properties. pH of wastes ranged from 3.3 to 8.0. Contents of total N and loss on ignition matter were in the ranges of 0.2~5.6%, and 0.8~15.3%, respectively. Heavy metals in the wastes were higher in the coal mines than those in the other mine wastes. Total concentrations of metals in the wastes were in the orders of Pb > Zn > Cu > Cd, exceeded the corrective action level of the Soil Environment Conservation Law and higher than the natural abundance levels reported from uncontaminated soils. Relative distribution of heavy metal fractions was residual > organic > reducible > carbonate > adsorbed, reversing the degree of metal bioavailability. Mobile fractions of metals were relatively small compared to the total concentrations. Soil Pollution Assesment Guidance(SPAG) values were ranged from 0.08 to 9.14 based on labile fraction of metal concentrations. SPAG values of labile concentration were lower than those of total concentration.

• Phonetics and Speech Sciences
• /
• v.6 no.3
• /
• pp.109-119
• /
• 2014

This article represents a first step in a large study aimed at elucidating the relationship between production and perception involved in sound change of /o/ in (Seoul) Korean. In this paper we present the results of a production study and a perception experiment. For the production study we examined vowel production data of 20 young adult speakers, measuring the first and second formants, then conducted a discriminant analysis based on those values. In terms of their F1-F2 values, the distribution of /o/ and /u/ were close, and even overlapping in some circumstances, which is consistent with the literature. This tendency was more apparent among the female speakers than the males. Moreover, with the females' distributions, /o/ was frequently categorized as /u/, suggesting that the direction of the sound change is indeed increasing from /o/ to /u/. Next, to investigate the effects of this proximity on perception, we used the production data of five randomly selected speakers from the production study as stimuli for a perception experiment in which 21 young adult native speakers of (Seoul) Korean performed a vowel identification task and provided a Goodness rating on a 5-point scale. We found that while rates of correctness were high, when these correctness scores were weighted by the Goodness rating, these "weighted correctness" scores were lower in some cases, indicating a degree of confusion in distinguishing between the two vowels.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.4
• /
• pp.135-140
• /
• 2005

Thermal-fluid analysis was performed to understand the thermal behavior in the horizontal CVD reactor thereby to design a susceptor which has a uniform deposition rate during silicon EPI growing. Four different types of susceptor designs, standard (no hole susceptor), hole $\sharp$1 (240 mm), hole $\sharp$2 (150 mm) and hole $\sharp$3 (60 mm), were simulated by CFD (Computational Fluid Dynamics) tool. Temperature, gas flow, deposition rate and growth rate were calculated and analyzed. The degree of flatness of EPI wafer loaded on the susceptor was computed in terms of silicon growth rate. The simulation results show that the temperature and thermal distribution in the wafer are greatly dependent on inner diameter of hole susceptor and demonstrate that the introduction of hole in the susceptor can degrade wafer flatness. Maximum temperature difference appeared around holes. As the diameter of the hole decreases, flatness of the wafer becomes poor. Among the threes types of susceptors with the hole, optimal design which resulted a good uniform flatness ($5\%$) was obtained when using hole $\sharp$1.

• Carbon letters
• /
• v.9 no.4
• /
• pp.316-323
• /
• 2008

The factors that influence ablation resistance in fiber composites are properties of the reinforced fiber and matrix, plugging quantity of fiber, geometrical arrangement, crack, pore size, and their distributions. To examine ablation resistance according to distribution of crack and pore size that exist in carbon/carbon composites, this study produced various sizes of unit cells of preforms. They were densified using high pressure impregnation and carbonization process. Reinforced fiber is PAN based carbon fiber and composites were heat-treated up to $2800^{\circ}C$. The finally acquired density of carbon/carbon composites reached more than $1.932\;g/cm^3$. The ablation test was performed by a solid propellant rocket engine. The erosion rate of samples is below 0.0286 mm/s. In conclusion, in terms of ablation properties, the higher degree of graphitization is, the more fibers that are arranged vertically to the direction of combustion flame are, and the less interface between reinforced fiber bundle and matrix is, the better ablation resistance is shown.

• Carbon letters
• /
• v.15 no.2
• /
• pp.142-145
• /
• 2014

Isotropic synthetic graphite scrap and phenolic resin were mixed, and the mixed powder was formed at 300 MPa to produce a green body. New bulk graphite was produced by carbonizing the green body at $700^{\circ}C$, and the bulk graphite thus produced was impregnated with resin and re-carbonized at $700^{\circ}C$. The bulk density of the bulk graphite was $1.29g/cm^3$, and the porosity of the open pores was 29.8%. After one impregnation, the density increased to $1.44g/cm^3$ while the porosity decreased to 25.2%. Differences in the pore distribution before and after impregnation were easily confirmed by observing the microstructure. In addition, by using an X-ray diffractometer, the degrees-of-alignment (Da) were obtained for one side perpendicular to the direction of compression molding of the bulk graphite (the "top-face"), and one side parallel to the direction of compression molding (the "side-face"). The anisotropy ratio calculated from the Da-values obtained was 1.13, which indicates comparatively good isotropy.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1552-1556
• /
• 2010

The aim of this study was to evaluate, through the use of microsatellite markers, the current genetic diversity and the relationships of 375 individuals from 8 local sheep breeds reared in typical breeding farms in the northwest of China, and moreover, to offer a contribution towards genetic conservation decisions for the studied breeds. The expected heterozygosities and allelic richness for the 8 breeds varied from 0.474 to 0.623 and from 3.8 to 5.4, respectively. All the populations showed a significant deficit in heterozygosity and a relatively low level of genetic diversity. Furthermore, the high positive FIS value (ranging from 0.255 to 0.556) indicated inbreeding to be one of the main causes for high genetic homogeneity and lack of heterozygosity in all breeds. The clustering analysis performed with the DISPAN package showed that Aletai, Kazak, Bashibai and Bayinbuluke were grouped together, and Hetian, Qira black and Duolang were grouped together, which indicated that the relationship among breeds displayed some degree of consistency with their geographical distribution, production and origin. These findings indicate that improved conservation measures must be undertaken to avoid further losses of genetic diversity and minimize inbreeding represented by these breeds.