• Elastomers and Composites
• /
• 제51권4호
• /
• pp.280-285
• /
• 2016

The purpose of this study is to get optimum design and operation conditions of the heating rubber roller for laminating process. The cause of performance degradation of heating rubber roller is delamination of rubber on metal tube, rubber aging due to high temperature. We measured the material properties of thermal expansion, thermal conductivity, specific heat and density and analyzed thermal distributions of rubber layer using finite element method. As a result of heat/flow analysis, the density distribution of heating coil must shorten the stabilization time by reducing the temperature deviation on the length direction at the temperature rising section after increasing the density of the area contacting with the laminate film at the center part which is an opposite of the current composition while enabling to maintain the temperature of heater to be consistent while maintaining the temperature deviation to be low when heat loss is created. Finally, we determined optimum heating method of heating rubber roller.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.481-487
• /
• 2016

A new two-line based inversion driving method is introduced for low power display-driver ICs. By inserting a timing offset between the chopper stabilization and the alternation of LCD polarity, we can reduce power consumption without noticeable degradation in the display quality. By applying the proposed scheme to 12" LCD applications, we achieved 7.5% and 27% power saving in the display-driver IC with white and black patterns, respectively.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.60-72
• /
• 2003

To investigate the effect of cholesterol in liposome on the stability of incorporated retinol, the physico-chemical experiments for various amounts of cholesterol-containing liposomes were performed. Liposome with retinol containing cholesterol was prepared as multilamella vesicles(MLVs) by dehydration/rehydration method. The incorporation efficiency of retinol into liposome was maximized as 99.31 % at 50:50 (phosphatidylcholine/cholesterol) at pH 9. The stability of incorporated retinol at low storage temperature was enhanced with increasing cholesterol content than at high storage temperature. For example, incorporated retinol in liposome at glycine buffer(pH 9} was degraded slowly during storage at 4. The degradation of retinol in liposomes was slower at pH 9 than at pH 7. These results supported that cholesterol in liposome increased largely the stability of incorporated retinol.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.762-769
• /
• 2016

The dynamic modulation transfer function (MTF) for image degradation caused by sinusoidal vibration is formulated based on a Bessel function of the first kind. The presented method makes it possible to obtain an analytical MTF expression derived for arbitrary frequency sinusoidal vibration. The error obtained by the use of finite order sum approximations instead of infinite sums is investigated in detail. Dynamic MTF exhibits a stronger random behavior for low frequency vibration than high frequency vibration. The calculated MTFs agree well with the measured MTFs with the slant edge method in imaging experiments. With the proposed formula, allowable amplitudes of any frequency vibration are easily calculated. This is practical for the analysis and design of the line-of-sight stabilization system in the remote sensing camera.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.262-265
• /
• 2001

In order to investigate the water tree degradation behavior on XLPE cable, direct voltage of 200 to 800V has been applied to the material at 50$^{\circ}C$∼100$^{\circ}C$, and the water tree property has been correlated with voltage and temperature in this study. The leakage current was shown to increase as temperature increased and the Ohm's law was generally satisfied in this experiment though some experimental errors were found. The leakage current was shown to decrease and reach to the stable state with time. It was also shown that the time for the stabilization of leakage current was lessened as voltage increased

• Macromolecular Research
• /
• 제11권1호
• /
• pp.19-24
• /
• 2003

Polymeric gene delivery system attracts profound attention as it shows less toxicity, versatility, and reasonable gene expression efficiency. Terplex system, a synthetic biopolymeric gene delivery system consisting of stearyl poly-L-lysine (stearyl-PLL) and low density lipoprotein (LDL) was evaluated for its body distribution of gene expression of exogenously administered pDNA after tail-vein injection in mice. Kidney and spleen are two major organs with highest gene expression, whereas liver and heart showed marginal gene expression among the organs examined. Hemolytic effect of the terplex system was evaluated using human red blood cells, where terplex system did not cause significant hemolysis at the concentrations above the experimental ranges, although unmodified PLL or stearyl-PLL without LDL did. Serum stability of terplex system against enzymatic degradation was also significantly enhanced, presumably due to the steric stabilization from the polymers. Based on these findings and along with its high in vitro transfection efficiency, terplex system could serve as a safe and efficient polymeric gene delivery system with many applications for the in vivo gene therapy.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.191-201
• /
• 2019

Petroleum industry produces one of the popular hazardous waste known as Petroleum Sludge. The treatment and disposal of petroleum sludge has created a major challenge in recent years. This review provides insights into various approaches involved in the treatment, and disposal of petroleum sludge. Various methods used in the treatment and disposal of petroleum sludge such as incineration, stabilization/solidification, oxidation, and bio-degradation are explained fully and other techniques utilized in oil recovery from petroleum sludge such as solvent extraction, centrifugation, surfactant EOR, freeze/thaw, pyrolysis, microwave irradiation, electro-kinetic method, ultrasonic irradiation and froth flotation were discussed. The pros and cons of these methods were critically considered and a recommendation for economically useful alternatives to disposal of this unfriendly material was presented.

• Korean Chemical Engineering Research
• /
• 제47권2호
• /
• pp.169-173
• /
• 2009

Dynamic DSC와 TGA를 이용하여 NR/CR 고무복합체의 가황시스템에 따른 가교화반응과 열화반응특성을 연구하였다. 주어진 샘플에 대하여 승온속도를 각각 달리하여 DSC 곡선을 얻었고, 가황반응이 끝난 같은 샘플을 이용하여 TGA에서도 같은 승온 속도의 실험으로 열분해 곡선을 얻은 다음, Kissinger의 해석 방법에 따라 가교 및 열화 반응의 활성화에너지를 구하고 서로 비교하였다. 실험에 사용된 NR/CR 고무복합재료는 대개 $120{\sim}180^{\circ}C$와 $350{\sim}450^{\circ}C$ 사이의 온도영역에서 각각 가교 반응과 열분해반응이 일어나는 것으로 관찰되었으며 Kissinger의 해석방법이 잘 적용될 수 있는 것으로 나타났다. 또한 DSC에 의한 생성 활성화에너지는 $83.0{\pm}5.0kJ/mol$로서 TGA에 의한 분해 활성화에너지인 $147.0{\pm}2.0kJ/mol$보다 매우 낮은 값을 나타내었다. 이러한 사실로부터 가황제/가황촉진제의 조성비 변화는 반응기구의 변화에는 크게 영향을 미치지 않지만 생성반응 시에는 샘플내의 저분자 화합물들과 함께 촉매역할을 하여 활성화에너지를 낮추는 역할을 하게 되는 반면, 반응이 끝난 후에는 더 이상 촉매로서 작용하지 못하게 되며 이에 따라 열분해활성화에너지는 주쇄의 분해반응에 의해 상대적으로 더 높게 나타내게 되는 것으로 생각할 수 있었다.

• Geomechanics and Engineering
• /
• 제12권3호
• /
• pp.523-539
• /
• 2017

Clay soils are typical for their swelling properties upon absorption of water during rains and development of cracks during summer time owing to the profile desorption of water through the inter-connected soil pores by water vapour diffusion leading to evaporation. This type of unstable soil phenomenon by and large poses a serious threat to the strength and stability of structures when rest on such type of soils. Even as lime and cement are extensively used for stabilization of clay soils it has become imperative to find relatively cheaper alternative materials to bring out the desired properties within the clay soil domain. In the present era of catastrophic environmental degradation as a side effect to modernized manufacturing processes, industrialization and urbanization the creative idea would be treating the waste products in a beneficial way for reuse and recycling. Bottom ash and ecosand are construed as a waste product from cement industry. An optimal combination of bottom ash-eco sand can be thought of as a viable alternative to stabilize the clay soils by means of an effective dispersion dynamics associated with the inter connected network of pore spaces. A CATIA model was created and imported to ANSYS Fluent to study the dispersion dynamics. Ion migration from the bottom ash-ecosand pile was facilitated through natural formation of cracks in clay soil subjected to atmospheric conditions. Treated samples collected at different curing days from inner and outer zones at different depths were tested for, plasticity index, Unconfined Compressive Strength (UCS), free swell index, water content, Cation Exchange Capacity (CEC), pH and ion concentration to show the effectiveness of the method in improving the clay soil.

• 공업화학
• /
• 제16권2호
• /
• pp.226-230
• /
• 2005

Chitosan유도체인 6-amino-6-deoxychitosan (6A6DC)은 상피세포 성장인자(EGF)를 안정화시키기 위한 하나의 당으로써, tosyl chloride, sodium azide 그리고 lithium aluminum tetrahydride와의 반응으로부터 성공적으로 제조되었다. 이것의 구조는 원소분석, FT-IR, $^1H$ NMR 및 $^{13}C\{^1H\}$ NMR에 의해 확인되었다. 6A6DC는 amino기의 치환율이 0.7로 나타났으며, $0.3{\mu}g/mL{\sim}600{\mu}g/mL$의 농도범위에서 normal human dermal fibroblast (NHDF)가 증식하는데 어떠한 세포독성도 나타내지 않았다. 따라서, 6A6DC는 자체의 세포무독성과 높은 반응성으로 인하여 단백질 분해효소로부터 EGF를 안정화시키는데 적합한 재료라고 사료된다.