• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.629-633
• /
• 2008

Frequently occurring flood and drought have increased the necessity of an effective water resources control and management of river flows. Therefore, the simulation of the flow distribution in natural rivers is very important to the solution of a wide variety of practical flow problems in water resources engineering. Usually in many flow problems, two-dimensional approach can provide good estimates of complex flow features in the flow around islands and obstructions, flow at confluence and flow in braided channel. The objective of this study is to examine validation of developed an accurate and robust two-dimensional finite element method with wet and dry simulation in complex natural rivers. Milyang river, and Kumho river and Keum river were performed for tests. The results were compared with those of existing model. The suggested model displayed reasonable flow distribution compared with existing model in dry area for application of natural river flow. As a result of this study, the developed general two-dimensional model provide a reliable results for flow distribution of wet and dry domain, it could be further developed to basis for extending to water quality and sediment transport analysis.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.4
• /
• pp.373-377
• /
• 2010

Vascular anomalies are common birthmarks. A eight-month-old male infant had a small size, bright red swelling on the lower lip since birth. On cutaneous examination there was a small brightly erythematous, lobulated, soft plaque on the left side of the lower lip of $10{\times}8{\times}5$ mm. Ultrasonogram examination revealed the lesion and confirmed the diagnosis of capillary hemangioma. The decision to initiate treatment is based on many factors, including size, location and risks and benefits of the proposal therapy. Systemic corticosteroids are decided to prevent the scarring and deforming. Prednisolone was given at a dose of 2 mg/kg/day for 2 weeks followed by tapering for 6 weeks for treatment. After eight weeks there was 80% reduction in the size of the lesion and the left lower lip almost completely cleared without intraoral bleeding. Furthermore, intervention by way of systemic steroids, laser therapy or surgical debulking is appropriate and safe in a select group of patients presenting with a proliferating hemangioma. This report describes a case that was sucessfully treated by systemic steroid therapy for hemangima in intraoral region.

• International Journal of Ocean System Engineering
• /
• v.1 no.2
• /
• pp.110-119
• /
• 2011

Numerical and experimental studies were performed to investigate the aerodynamic performance of a thin wing in close vicinity to the ground. The vortex lattice method (VLM) was utilized to simulate the wing in ground (WIG) effect, which included freely deforming wake elements. The numerical results acquired through the VLM were compared to the experimental results. The experiment entailed varying the ground clearance using the DHMTU (Department of Hydromechanics of the Marine Technical University of Saint Petersburg) wing and the WIG craft model in the wind tunnel. The aero-dynamic influence of the design parameters, such as angles of attack, aspect ratios, taper ratios, and sweep angles were studied and compared between the numerical and experimental results associated with the WIG craft. Both numerical and experimental results suggested that the endplate augments the WIG effect for a small ground clearance. In addition, the vortex lattice method simulated the wake deformation following the wing in the influence of the ground effect.

• Journal of computational fluids engineering
• /
• v.20 no.1
• /
• pp.1-9
• /
• 2015

A developed code is applied to simulate relative motion of floating bodies in a side-by-side arrangement, including effects of a fender and a hawser. The developed code is based on the flux-difference splitting scheme for immiscible incompressible fluids and the hybrid Cartesian/immersed boundary method. To validate the developed code for free surface flows around deforming boundaries, the water wave generation is simulated, which is caused by bed movement. The computed wave profile and time histories of wave elevation are compared with other experimental and computational results. The effects of a fender and a hawser are modeled by asymmetric force acting on the floating bodies according to a relative displacement with the bounds, in which the fender and the hawser exert no force on the bodies. It has been observed that the floating body can be accelerated by a gap flow due to a phase difference caused by the free surface. Grid independency is established for the computed time history of the body velocity, based on three different size grids.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.652-653
• /
• 2009

In this study, flow-induced vibration (FIV) analyses have been conducted for a 3D compressor blade model. Advanced computational analysis system based on computational fluid dynamics (CFD) and computational structural dynamics (CSD) has been developed in order to investigate detailed dynamic responses of designed compressor blades. Fluid domains are modeled using the computational grid system with local grid deforming and remeshing techniques. Reynolds-averaged Navier-Stokes equations with $\kappa-\varepsilon$ turbulence model are solved for unsteady flow problems of the rotating compressor model. A fully implicit time marching scheme based on the Newmark direct integration method is used for computing the coupled aeroelastic governing equations of the 3D compressor blade for fluid-structure interaction (FSI) problems. Detailed dynamic responses and instantaneous pressure contours on the blade surfaces considering flow-separation effects are presented to show the multi-physical phenomenon of the rotating compressor blade.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.3
• /
• pp.83-101
• /
• 1992

A systematic method of remeshing is required due to severe mesh distortion after some finite deformation in the finite element analysis of practical forging processes. In order to cope with the problem of mesh degeneracy during deformation, the proper design of meshes plays an improtant role in the analysis. In so-called "Modular Remeshing", the physical characteristics of metal flow and geometric characteristics are incorporated in "Module", which can be applied to the mesh design for a certain mode of deformation in so far as the topology of deforming region remains the same. For the purpose of more effective and systematic use of the modular remeshing scheme, an expert system has been developed in the framework of the proposed remeshing schemel. In oredr to show the effectiveness of the method, the rib-web type forging with axial relief or radial relief and spike forging are simulated. It has been thus shown that the proposed method of automatic remeshing by using modular remeshing and expert system can be futher extended and applied to various forging problems with complicated geometrical configurations.ical configurations.

• Journal of Plant Biology
• /
• v.38 no.3
• /
• pp.275-280
• /
• 1995

The formation of osmiophilic globules related to the granal lysis has been investigated with a shade plant ginseng (Panax ginseng C. A. Meyer) exposed to full sunlight. The changes of chloroplast were examined as a function of time over 9 days under full sunlight exposure. The ultrastructure of ginseng leaf showed swelling of the granal thylakoid during an early stage of the light exposure. The thylakoid membrane faded and small electron-opaque dots were aggregated on the edges of the granal thylakoid membrane when the exposure time was increased over 1 day. Then, the sahpe of the grana changed into round. After the exposure over 3 days, there appeared many osmiophilic globules with multi-lamellated concentric structure. The globules at this stage were partly accumulated with osmiophilic substances. The outermost membrane of these multi-lamellated osmiophilic globules was attached to the stromal thylakoid membrane connecting to the deforming grana. The osmiophilic globules were elongated after 9 days. In this stage, the multi-lamellated structure was difficult to identify due to severe accumulation of osmiophilic substances. The number of the osmiophilic globules also increased along with the full sunlight exposure time. This observation leads us to believe that the multi-lamellated osmiophilic globules came from the deformation of grana.

• Archives of Plastic Surgery
• /
• v.33 no.3
• /
• pp.388-391
• /
• 2006

Hemangioma is one of the most common congenital tumors in the region of the face and neck. Although histologically benign, these facial masses are clinically malignant for their deforming and inexorable growth, especially in so-called 'cavernous hemangioma'. Carvenous hemangioma is the most common primary tumor occurring in the adult orbit. This tumor has symptoms that characteristically develop over several years with slowly progressive proptosis, eyeball deviation, hyperopia, diplopia and optic nerve compression. Today, hemangiomas are being treated by various methods; steroids, electrocoagulation, injection of sclerosing agent, cryotherapy, radiation therapy, laser therapy, and surgical treatment, etc. In principle, surgical approaches to the orbit must provide maximum safety and optimal visualization. We have experienced a case of large cavernous hemangioma in the orbit inferolaterally. The surgical treatment of tumor was achieved by the bicoronal approach combined with inferomedial and inferolateral orbitotomy. This surgical approach allows better visualization of the tumor and greater protection of essential anatomic structures. We obtained satisfactory results in terms of aesthetic and functional consideration. We present our case with a brief review of the literature related to orbital cavernous hemangioma.

• International Journal of Highway Engineering
• /
• v.14 no.6
• /
• pp.1-11
• /
• 2012

PURPOSES : The purpose of the study was to examine dynamic features of concrete after mixing a little macro fiber with small aspect ratio and long length utilized for bridge, tunnel and shotcrete for tensile performance and crack control in domestic/overseas countries with cement concrete pavement mix. METHODS : Coarse aggregates with small aspect ratio and macro fibers with maximum length of approximately 32 mm are introduced in small quantities in the mix proportions of concrete pavement so as to prevent loss of the workability. Then, this study intends to evaluate the applicability of macro fibers in the mix proportions of concrete pavement by examining the basic construction performance, as well as the change of toughness, the equivalent bending strength and the flexural toughness index caused by compression, bending, tension and the flexural stress-displacement curve. RESULTS : As the results, in each kind of macro fiber, polyvinyl alcohol fiber and steel fiber displayed a good performance. CONCLUSIONS : In 0.2 and 0.3% of fiber contents, it is appeared that polyvinyl alcohol fiber has a large effect on improvement of tensile performance and steel fiber on improvement of deforming performance of bending stress.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.14-17
• /
• 1999

The wrinkling behavior of a thin sheet with perfect geometry is a kind of compressive instability. The compressive instability is influenced by many factors such as stress state mechanical properties of the sheet material geometry of the body contact conditions and plastic anisotropy. The analysis of compressive instability in plastically deforming body is difficult considering all the factors because the effects of the factors are very complex and the instability behavior may show wide variation for small deviation of the factors. In this study the bifurcation theory is introduced for the finite element analysis of puckering initiation and growth of a thin sheet with perfect geometry. All the above mentioned analysis and the post-bifurcation behavior is analyzed by introducing the branching scheme proposed by Riks. The finite element formulation is based on the incremental deformation theory and elastic-plastic material modeling. in order to investigate the effect of plastic anisotropy on the compressive instability a square plate that is subjected to compression in one direction and tension in the other direction is analyzed by the above-mentionedfinite element analysis. The critical stress ratios above which the buckling does not take place are found for various plastic anisotropic modeling method and discussed. Finally the effect of plastic anisotropy on the puckering behavior in the spherical cup deep drawing process is investigated.