• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제48권4호
• /
• pp.469-478
• /
• 2012

To manage, sort, and grade fishery resources, it is necessary to measure their morphometric characteristics. This labor-intensive task involves performing repetitive operations on land and on a research vessel. To reduce the amount of labor required, a vision-based automatic measurement system (VAMS) for the measurement of morphometric characteristics of flatfish, such as total length (TL), body width (BW), and body height (BH), has been developed as part of a database management system for fishery resources management. This system can also measure the mass (M) of flatfish. In the present study, we describe a morphological image processing algorithm for the measurement of certain characteristics of flatfish. This algorithm, which involves preprocessing, edge pattern matching, and edge point detection, is effective in cases where the flatfish being measured has a deformed tail and is randomly oriented. The satisfactory performance of the proposed algorithm is also demonstrated by means of experiments involving the measurement of the BW, TL and BH of a flatfish when it is straightened (BW : 117mm, TL : 329mm, BH : 24.5mm), when its tail is deformed, and when it is randomly oriented.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권4호
• /
• pp.5-12
• /
• 2003

This paper discusses about the thickness effects on the structural durability of a bileaflet mechanical heart valve (MHV). In the study on the design and the mechanical characteristics of a bileaflet mechanical heart valve, the fluid mechanics analysis on the blood flow passing through leaflets, the kinetodynamics analysis on the rigid body motion of the leaflet induced by the pulsatile blood flow, and the structural mechanics analysis for the deformed leaflet are required sequentially and simultaneously. Fluid forces computed in the fluid mechanics analysis on the blood flow are used in the kinetodynamics analysis for the leaflet motion. Thereafter, the structural mechanics analysis for the deformed leaflet follows to predict the structural strength variation of the leaflet as the leaflet thickness changes. Analysis results show that structural deformations and stresses increase as the fluid pressure increases and the leaflet thickness decreases. Analysis results also show that the leaflet becomes structurally weaker and weaker as the leaflet becomes thinner and thinner.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제25권5호
• /
• pp.796-803
• /
• 1996

Gamma irradiation was applied to soybean(Glycine max.), Hwangkeum, at dose levels of 0, 5, 10 and 20 kGy to improve the physical properties of soybeans. The time to reach a fixed moisture content was reduced depending on the increment of soaking temperatures and applied irradiation dose levels. Irradiation at 5~20 kGy resulted in reduction in soaking time of the soybeans by about 3~6 hrs at soaking temperature of $20^{\circ}C.$ The degree of cooking of soybeans in boiling water was determined by measuring the maximum cutting force of cotyledon. The cutting force to reach complete cooking was about 145g/g. Irradiation at 5~20 kGy resulted in a reduction of cooking time of soybeans by 55~75% as compared to the nonirradiated soybean. In electron microscopic observation of seed coat inner, the parenchyma of nonirradiated soybean showed tight fibrillar structure, whereas that of irradiated soybeans showed loosened and deformed structure. The microstructure of compressed cells and cotyledon epidermis was also deformed by gamma irradiation. In subcellular structure of cotyledon, the roundness of protein body was deformed and changed to spike shape at 20 kGy. Also, the size of lipid body decreased as the irradiation dose levels increased.

• Journal of Fashion Business
• /
• 제17권4호
• /
• pp.40-57
• /
• 2013

In examining the relationship between fashion and art which are intimately interrelated, the body is a suitable subject in that it is the common object of representation. This study investigates and compares the images of the body in Francis Bacon's paintings from 1940s to 1970s and the formative aspect and aesthetic value of the abstract body images in Rei Kawakubo's designs since 1980s. The figures in Bacon's paintings are confusingly and atypically deformed as well as distorted, which are the combinations of the anatomies without references, not so much represented objects as experienced sense. Kawakubo's designs attempt to deform the body, moreover, she transforms the body; represent abstract forms without association with any other figures that exist, emphasizing sculptural or architectural shapes of garment. She suggests extensive visual language of dress by challenging the norms of beauty. The body in Bacon and Kawakubo's works is dispersive as well as complex in that the body images are deconstructed, fragmented, and exaggerated. Respectively, they articulate the perception of the body in postmodernism era by destroying the myth of subject; furthermore establish the aesthetics that transcend conventional ideals by reevaluating as well as refusing the standards of beauty.

• ETRI Journal
• /
• 제46권4호
• /
• pp.571-580
• /
• 2024

A compact triple-band porous electromagnetic bandgap structure-loaded coplanar-waveguide-fed wearable antenna is introduced for applications of wireless body area networks. The porous structure is aimed to create a stopband or bandgap in the electromagnetic spectrum and increase breathability. The holes in the bottom electromagnetic bandgap surface increase the inductance, which in turn increases the bandwidth. The final design resonates at three bands with impedance bandwidths of 264 MHz, 100 MHz, and 153 MHz and maximum gains of 2.18 dBi, 6.75 dBi, and 9.50 dBi at 2.45 GHz, 3.5 GHz, and 5.5 GHz, respectively. In addition, measurements indicate that the proposed design can be deformed up to certain curvature and withstand human tissue loading. Moreover, the specific absorption rate remains within safe levels for humans. Therefore, the proposed antenna can suitably operate in the industrial, scientific, and medical, Bluetooth, Wi-Fi, and WiMAX bands for potential application to wireless body area networks.

• Transactions of Materials Processing
• /
• 제7권1호
• /
• pp.81-93
• /
• 1998

Identification of forming limits of sheet metals is an important task to be done before the sheet metal forming processes. The information of the forming limit is indispensable for design of deformed shapes and related forming processes. This procedure becomes more important than ever as the auto-body becomes complicated and the number of auto-body parts is reduced for lower production cost. To identify the forming limit of sheet metals stretching with a hemispherical punch has gained popularity because of the convenient experimental procedure. The stretching experiment however has localized deformation or the shear band is originated from the non-unifrom deformation in the critical circum-stance instead of the absolute criterion. More accurate information of the forming limit therefore could be obtained by a more appropriate experiment to the real process. In this papaer an experiment program is devised to practivally identify the forming limits of sheet metals for auto-body parts. The experiment program contains not only stretching but deep-drawing Both forming experiments use the same hemispherical punch while they use different specimens. Deep-drawing experiments use speci-mens cut out in circular arc on both sides of circular blank to make it torn during the deep-drawing They also use speciments cut out straight in one side of a circular blank to make it deformed unevenly which causes local deformation during the deep-drawing. The experimental result demonstrates that the forming limit diagrams in the two cases show difference in their effective magnitude. The forming limit curve from deep-drawing is located lower than that from stretching. It is noted from the result that the deep-drawing process causes acceleration of localized deformation in comparison with the stretching process. From the experimental result the maximum value of forming limit could be pre-dicted for safe design.

• Journal of the Society of Naval Architects of Korea
• /
• 제33권4호
• /
• pp.22-31
• /
• 1996

An efficient calculation method of pressure acting on a bluff body is developed. The method is applied to assess the containment capability of an oil fence, considering skirt deformation in current. The pressure on the frontal side of the oil fence is determined by analyzing the potential flow, substituting the wake region as a rigid body which has its boundary at the closed separation streamlines. The pressure at the downstream side of the fence, the so called base pressure, is obtained from the existing experimental results. To verify the calculation method, pressure drag of some bluff bodies in an infinite-fluid medium is calculated, which shows good agreement with the experimental results. The deformed shape of the oil fence is obtained by solving, iteratively, the coupled equations governing the flow field and the deformation of the oil fence, respectively. The deformed shape and the decrease of draft of oil fences with different ballast mass in various current conditions are investigated.

• Journal of the Korean Ceramic Society
• /
• 제32권1호
• /
• pp.113-119
• /
• 1995

The green body was fabricated by a new forming method, pressureless powder packaing forming method, and the characteristics of sintered specimen were investigated. It was found that alumina ceramics prepared by the present method showed porous structure with narrow pore size distribution, and in case of abrasive powder sintered body, compared with dry-pressed specimen, had the nearly same density. Especially, the specimen prepared with spray-dried granules showed the characteristic that granules were not either deformed or fractured during forming and sintering process. Therefore, it was found that this new forming method was effective method in fabrication of porous ceramics on account of easy control of porosity and pore size and its high thermal stability.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제32권1호
• /
• pp.85-93
• /
• 2009

In this paper, the geometric design for the body of a 3"-PFA-lined plug valve is concerned, and body model which has less deformed PFA-resin after infection molding process is proposed. A CAE software is used to simulate the deformation due to heat in cooling. To reduce the deformation, some small shapes are added to PFA-resin surfaces related on wall of the valve housing. And thermal stress simulation with FEM methodology is followed after that. Also, the 3D-CAD package is used during the design processes. In this study, I tried to present the possibility to use the FEM analysis in the solid modeling process. So, the design engineer will be able to use analysis package effectively on his job within the limited range.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제26권8호
• /
• pp.1153-1164
• /
• 2002

The purpose of this study is to find out the creative visual expression in fashion illustration through the previous general theories on creativity. The creative visual expression, in fashion illustration works, can be summarized eight categories as follows. There are 'maximization & minimization'to emphasize the illustrators'emotions and contemporary trends, proposed specially in body expression, 'inversion' seen as the forms of contra-perspective, upside-down, rearrangement of parts, diverted process, etc, 'Unusual uses'to add the effect of caricature, parody, and humor to the fashion illustration works, 'extraordinary connection'seen as the shapes of various combination between animals, plants, stuff, and man, 'concealment & elimination'used frequently in creative visual expression includes a deformed human body, an abstracted human body, an extreme value contrast, simple colors, and dress in silhouette, 'association'seen in various methods; comparing the similar shapes, describing a certain situation or details for analogizing the whole, ‘illusion’ expressed in surreal, mysterious, and fairy depictions and 'substitution'to imitate the composition and colors of masterpieces, copy the parts.