• 제목/요약/키워드: deformational characteristics

검색결과 43건 처리시간 0.022초

화개지역에서 영남육괴 지리산 변성암복합체의 지질구조 (Geological Structure of the Jirisan Metamorphic Complex of the Yeongnam Massif in the Hwagae Area, Korea)

  • 이덕선;강지훈
    • 암석학회지
    • /
    • 제22권4호
    • /
    • pp.251-261
    • /
    • 2013
  • 영남육괴 지리산지구의 남동부에 위치하는 화개지역은 주로 선캠브리아기 지리산 변성암복합체로 구성되어 있으며, 선캠브리아기 구성암류는 남-북 방향의 밀착습곡과 동-서 방향의 개방습곡 형태의 암상분포를 보인다. 이 논문에서는 하동 회장암복합체의 서부에 위치하는 화개지역에서 지리산 변성암복합체의 변형된 암석구조에 대한 운동학적 기하학적 특징과 중첩된 변형구조들의 선후관계로부터 연구지역의 지질구조를 연구하였다. 그 결과, 연구지역의 지질구조는 적어도 세 번의 연성 변형단계를 거쳐 형성되었음을 알게 되었다. (1) $D_1$ 변형과 관련된 구조요소는 대부분 $D_2$ 변형에 의해 전위되어 $S_{0-1-2}$ 복합엽리로 인지된다. (2) $D_2$ 변형은 동-서 방향의 압축 지구조환경 하에서 남-북 방향의 $F_2$ 습곡과 $F_2$ 습곡축면에 (준)평행하게 발달하는 $D_2$ 연성전단대를 형성시켰다. (3) $D_3$ 변형은 남-북 방향의 압축 지구조환경 하에서 발생하여 그 이전 형성된 구조요소들의 방향성을 국부적으로 동북동 내지 서북서 방향으로 재배열시켰다. 이는 선캠브리아기 구성암류의 광역적인 남-북 방향의 밀착습곡과 동-서 방향의 개방습곡 형태의 암상분포는 각각 $D_2$ 변형, $D_3$ 변형과 밀접한 관련이 있음을 의미한다.

Geotechnical Engineering Progress with the Incheon Bridge Project

  • Cho, Sung-Min
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.133-144
    • /
    • 2009
  • Incheon Bridge, 18.4 km long sea-crossing bridge, will be opened to the traffic in October 2009 and this will be the new landmark of the gearing up north-east Asia as well as the largest & longest bridge of Korea. Incheon Bridge is the integrated set of several special featured bridges including a magnificent cable-stayed girder bridge which has a main span of 800 m width to cross the navigation channel in and out of the Port of Incheon. Incheon Bridge is making an epoch of long-span bridge designs thanks to the fully application of the AASHTO LRFD (load & resistance factor design) to both the superstructures and the substructures. A state-of-the-art of the geotechnologies which were applied to the Incheon Bridge construction project is introduced. The most Large-diameter drilled shafts were penetrated into the bedrock to support the colossal superstructures. The bearing capacity and deformational characteristics of the foundations were verified through the world's largest static pile load test. 8 full-scale pilot piles were tested in both offshore site and onshore area prior to the commencement of constructions. Compressible load beyond 30,000 tonf pressed a single 3 m diameter foundation pile by means of bi-directional loading method including the Osterberg cell techniques. Detailed site investigation to characterize the subsurface properties had been carried out. Geotextile tubes, tied sheet pile walls, and trestles were utilized to overcome the very large tidal difference between ebb and flow at the foreshore site. 44 circular-cell type dolphins surround the piers near the navigation channel to protect the bridge against the collision with aberrant vessels. Each dolphin structure consists of the flat sheet piled wall and infilled aggregates to absorb the collision impact. Geo-centrifugal tests were performed to evaluate the behavior of the dolphin in the seabed and to verify the numerical model for the design. Rip-rap embankments on the seabed are expected to prevent the scouring of the foundation. Prefabricated vertical drains, sand compaction piles, deep cement mixings, horizontal natural-fiber drains, and other subsidiary methods were used to improve the soft ground for the site of abutments, toll plazas, and access roads. Light-weight backfill using EPS blocks helps to reduce the earth pressure behind the abutment on the soft ground. Some kinds of reinforced earth like as MSE using geosynthetics were utilized for the ring wall of the abutment. Soil steel bridges made of corrugated steel plates and engineered backfills were constructed for the open-cut tunnel and the culvert. Diverse experiences of advanced designs and constructions from the Incheon Bridge project have been propagated by relevant engineers and it is strongly expected that significant achievements in geotechnical engineering through this project will contribute to the national development of the longspan bridge technologies remarkably.

  • PDF

해남 모이산 천열수 금-은 광호대의 지질구조와 광화작용 당시의 지구조환경 (Geological Structure of the Moisan Epithermal Au-Ag Mineralized Zone, Haenam and its Tectonic Environment at the Time of the Mineralization)

  • 강지훈;이덕선;류충렬;고상모;지세정
    • 자원환경지질
    • /
    • 제44권5호
    • /
    • pp.413-431
    • /
    • 2011
  • 옥천변성대 남서부에 위치하는 전남 해남군 황산면 모이산 지역에는 백악기 말 유천층군 해남층의 황산 화산쇄설 암을 모암으로 하는 천열수 금-은 광화대가 발달한다. 본 연구는 광화대의 형성과 관련된 지질구조를 파악하기 위해 모이산 지역의 층리배열, 습곡, 단층, 단열계, 석영맥의 특성, 단열계의 상대적인 발달순서 등을 조사하였고, 이를 바탕으로 광화작용이 발생할 당시의 지구조환경을 고찰해 보았다. 층리는 동북동 주향 방향이 우세하며 북북서 내지 남남동 방향의 저각 경사를 보이고 분산된 층리 배열은 경사-이동 단층 이외에 (동)북동 방향의 준수평-직립 개방습곡에 의해 규제되어 있다. 단열계는 적어도 6~7회의 변형단계를 걸쳐 형성되었다. D1 단계; 연장성이 우세한 동서 (D1-1)와 남북(D1-2) 방향의 주 단열조 형성기, D2 단계; 북서 방향의 인장단열 형성기, 동서(우수향)와 남북(좌수향) 방향의 공액 전단단열 운동기, D3 단계; 북동 방향의 인장단열 형성기, 동서(좌수향)와 남북(우수향) 방향의 공액 전단단열 재활동기, D4 단계; 연장성이 미약한 남북 방향의 인장단열 형성기, D5 단계; 북서 방향의 인장단열 재형성기. 동서(우수향)와 남북(좌수향)방향의 공액 전단단열 재활동기, D6 단계; 연장성이 미약한 동서 방향의 인장단열 형성기. 변형단계별 단열조의 출현빈도는 D1-1(19.73 %)> D1-2(16.44 %)> D3=D5(14.79 %)> D2(13.70 %)> D4(12.33 %)> D6(8.22 %) 순으로 우세하게 나타나고 평균개수/1 m는 D6(5.00개)> D5 = D4(4.67개)> D2(4.60개)> D3(4.13개)> D1-1(3.33개)> D1-2(2.83개) 순으로 높게 나타난다. 전체 단열조의 평균 조밀도는 420개로서 모이산 지역의 단열조는 평균 23.8 cm 간격 이상으로 발달한다. 석영맥의 방향성별 출현빈도는 동서 방향(52 %)> 북서 방향(28 %)> 남북 방향(12 %)> 북동 방향(8 %) 순으로 우세하게 나타난다. 전체 석영맥의 평균 조밀도는 4.14개로 나타나고 모이산 지역의 석영맥은 평균 24.2 cm 간격 이상으로 발달한다. 석영맥에 대한 미구조 연구결과, 천열수 금-은 광화작용(약 77.9~73.1 Ma)은 지구조적 응력이 아닌 천열수 파괴 단열작용과 직후의 정적인 지구조환경 하에서 기존에 형성된 연장성이 우세한 D1 단계의 동서 방향과 남북 방향의 단열조를 따라 발생한 것으로 보인다. 모이산 지역의 D1 단열작용은 유천층군과 불국사 화성압류의 화성활동과 변형을 초래하는 후기 백악기 이자나기판의 북향-사교 섭입작용과 관련하여 남북 방향의 압축력과 인정력이 교호하는 불안정한 지구조환경 하에서 발생하였던 것으로 고찰된다.