• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.110-118
• /
• 2013

This paper describes the development of DSSS wireless communication uplink system for missile remote control. In consideration of low probability of intercept, low probability of exploitation, anti-jam, low latency, and doppler frequency offset, we used DSSS partially DBPSK. Also we used the selective diversity with two receiving antennas to mitigate multipath interference which is the dominant channel impairment and the turbo product code(TPC) for forward error correction(FEC) to improve bit error rate performance.

• Journal of Hydrogen and New Energy
• /
• v.28 no.2
• /
• pp.129-136
• /
• 2017

Characteristics of $ZrO_2$ felt supported Cu/Zn catalysts have been investigated for the production of hydrogen via methanol steam reforming. Cu and Zn in different weight percent were loaded using wet impregnation over $ZrO_2$ felt support. The catalysts were characterized with BET and FE-SEM. The performance of these synthesized catalysts were investigated at SCR=1.5, $GHSV=2000h^{-1}$, temperature=$300{\sim}400^{\circ}C$, and pressure=2.5~19.5 barA. The results showed that the $Cu^{32.5}Zn^{7.5}ZrO_2$ catalyst was most active in terms of methanol conversion and hydrogen production. The methanol conversion in steam reforming of methanol was 84.6% at 19.5 barA and furnace $400^{\circ}C$ over $Cu^{32.5}Zn^{7.5}ZrO_2$ catalyst. The catalysts prepared using $ZrO_2$ felt show higher reactor temperature than the pellet type catalyst at same furnace temperature.

• International Journal of Aeronautical and Space Sciences
• /
• v.13 no.3
• /
• pp.361-368
• /
• 2012

This paper presents an approach on the design of a nonlinear controller to track a reference velocity for an air-breathing supersonic vehicle. The nonlinear control scheme involves an adaptation of propulsive and aerodynamic characteristics in the equations of motion. In this paper, the coefficients of given thrust and drag functions are estimated and they are used to approximate the equations of motion under varying flight conditions. The form of the function of propulsive thrust is extracted from a thrust database which is given by preliminary engine input/output performance analysis. The aerodynamic drag is approximated as a function of angle of attack and fin deflection. The nonlinear controller, designed by using the approximated nonlinear control model equations, provides engine fuel supply command to follow the desired velocity varying with time. On the other hand, the stabilization of altitude, separated from the velocity control scheme, is done by a classical altitude hold autopilot design. Finally, several simulations are performed in order to demonstrate the relevance of the controller design regarding the vehicle.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1366-1370
• /
• 2007

Predicting the noise radiated from vibrating structures is important in the automotive, aerospace, construction equipment, and defense industries. In this paper, a numerical implementation of the boundary element method in solving the Helmholtz integral equation for radiated noise prediction is presented. To predict the noise emitted by vibrating structure, the developed code can use the results from a structure analysis performed by a multi-purpose structural finite element code like ANSYS and directly measured data by non-contact vibration sensor like Laser Doppler Vibrometer. To verify the accuracy of developed code, two kinds of verification are perfomed. Firstly, the computer code used the harmonic analysis results of ANSYS in simple model and try to match with SYSNOISE. After matching with simulation results, the code compared with the result from SYSNOISE which used the velocity data from the LDV measurement with different number of points. The performance of the developed code for vibro-acoustic noise prediction is presented using the experimental results of the non-contact sensor

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.682-688
• /
• 2000

To improve the performance of a flexible robot arm one of the important things is the vibration displacement measurement of a flexible arm. Many types of sensors have been used to measure it, The most popular has been strain gauges which measures the deflection of the beam,. Photo sensors have also been for detecting beam displacement and accelerometers are often used to measure the beam vibration. But the vibration displacement can be obtained indirectly from these sensors. In this article a vision sensor is used as a displacement sensor to measure the vibration displacement of a flexible robot arm. Several schemes are proposed to reduce the image processing time and increase its accuracy. From the experimental results it is seen that the vision sensor can be an alternative sensor for measuring the vibration displacement and has a potential for on-line tip position control of flexible robot systems.

• Journal of Information Management
• /
• v.41 no.3
• /
• pp.45-66
• /
• 2010

The purpose of this study is to develop service quality measurement model(DL-SQI model) which are able to measure objectively service quality of digital libraries in Korea and to measure user perceived service quality performance with DL-SQI model. This study also investigates the influence of service quality on customer satisfaction and customer loyalty. Before measurement, two principal rules and indicator formula were made to measure the service quality. Finally service quality of three digital libraries selected as samples was measured and analyzed in various points of view. It was developed a DL-SQI Consequences Model and testified it through path analysis using structural equation model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.560-565
• /
• 2018

The SPICE (Sparse Iterative Covariance-based Estimation) algorithm estimates the azimuth angle by applying a sparse recovery method to the covariance matrix in the time domain. In this paper, we show how the SPICE algorithm, which was originally formulated in the time domain, can be extended to the frequency domain. Furthermore, we demonstrate, through numerical results, that the performance of the proposed algorithm is superior to that of the conventional frequency domain algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.500-507
• /
• 2018

A three-channel radio frequency (RF) monopulse receiver using a data signal with a maximum transmission rate of 274 Mbps was designed. A monopulse receiver using a broadband communication signal was designed to operate in the Ku band, and it consists of a down-conversion module and a signal-processing module. To satisfy the performance of the proposed RF monopulse receiver, a signal-processing function less than the reception sensitivity for each transmission rate according to the adaptive transmission rate is required. To minimize signal reception and mutual frequency interference of various bandwidths, two RF filters were applied. To verify the satisfaction of system requirements, an AWR Corp. simulation tool was used.

• The Korean Journal of Emergency Medical Services
• /
• v.21 no.3
• /
• pp.35-48
• /
• 2017

Purpose: The purpose of the study was to investigate the core competency of disaster management of 119 paramedics. Methods: A self-reported questionnaire was completed by 242 paramedics in C area from April 28 to May 12, 2017. The study instrument included general characteristics of the subjects (4 items), disaster experience, recognition, and preparedness (20 items), and importance and performance of disaster management core competency (24 items) by Likert 5-point scale. Data were analyzed using t-test, ANOVA, Pearson's correlation coefficient using IBM SPSS 24.0. Results: The seriousness of personal disaster was 4.02 points and the importance of disaster-related education was 4.28 points. The importance to core competency of disaster management was 4.39 points and the ability to perform core competency was 3.58 points. The seriousness of personal disaster and the importance of disaster-related education were positively correlated (r=.600, p=.000). The importance and ability to perform core competency were positively correlated (r=.389, p=.000). Conclusion: It is necessary to strengthen core competency of disaster management in paramedics who are the first defense line of disaster.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.5
• /
• pp.331-337
• /
• 2017

Thermal batteries, reserve power source, is activated by melting of molten salt at the temperature range of $350{\sim}550^{\circ}C$. To immobile the molten state electrolyte when the thermal battery is activated, the binder must be added in electrolyte. Usually, molten salts include 30~40 wt% of MgO binder to ensure electrical insulation as well as safety. However, the conventional MgO binder tends to increase ionic conductive resistance and thus the inclusion of the binder increases the total impedance of the battery. This paper mainly focused on the study of yttria stabilized zirconia (YSZ) as an alternative binder for molten salt. The chemical stability between the molten salt and YSZ is measured by XRD and DSC. And the sufficient path for ionic conduction on molten salt could be confirmed by the enhanced wetting behavior and the enlarged pore size of YSZ. The electrochemical properties were analyzed using single cell tests so that it showed the outstanding performance than that using MgO binder.