• 대한수학회지
• /
• 제32권4호
• /
• pp.775-784
• /
• 1995

Let $H$ be a separable, infnite dimensional, complex Hilbert space and let $L(H)$ denote the algebra of all bounded linear operators on $H$.

• 품질경영학회지
• /
• 제28권2호
• /
• pp.103-122
• /
• 2000

Process capability indices (PCI) $C_p\;C_{pk},\;C_m,\;and\;C_{pmk}$ are widely used to evaluate the process performance. The PCI's have been evolved to consider the 'off targetness' more adequately. However, all of these indices are found to be inconsistent with the proportion of nonconforming items, in some cases. That is, the PCI for a process may result in higher value even when the proportion of defectives increases. For these reasons, we propose a new capability index, $c_{pd}$, which is consistent with the defect rate. The characteristics of the new PCI, $c_{pd}$ are investigated with respect to the existing PCI's. Some statistical properties of an estimator for $c_{pd}$ are also investigated by a Monte Carlo simulation. Sensitivity study under minor deviation from normality is also performed to show the robustness of $c_{pd}$. A good estimator for $c_{pd}$ is under study.

• 대한전기학회논문지
• /
• 제40권8호
• /
• pp.731-740
• /
• 1991

This paper presents a knowledge based system to solve reactive power/voltage control problem in a power system. The methods to reduce inference time are proposed in inferring the solution of problem in the knowledge base which consists of heuristic rules and inowledge of experts. A set of indices drawn from the heuristic knowledge on the power system is utilized to make up for the defect of existing knowledge based systems which determine both the location and the amount of reactive power compensation devices. The concept of set of indices developed in this paper makes it possible to infer the amount of reactive power source only since the bus order list representing priority for the location of reactive power compensator to be switched on can be determined in advance. From the fact that there exists a relationship between the system voltage pattern and the reactive power pattern in operation, the pattern recognition technique is introduced to reduce the inference time in solving the severe voltage problem. To demonstrate the usefulness of the proposed knowledge based system, the IEEE 30 bus system is chosen as a sample system. The results of case study are also presented.

• Journal of Biosystems Engineering
• /
• 제16권3호
• /
• pp.272-280
• /
• 1991

The aims of this study were to investigate the feasivility of analyzing a few sorting factors such as size, coloration and defect of apples with a monochrome image processing system and to find apparent properties which could be effectively used for apple sorting. The results are summarized as follows. 1. A computer program was made to analyze the projection area, coloration and defect of an apple with a monochrome image processing system. 2. The algorithm developed to compute the projedtion area of an apple was between on the proportional relation between a given reference area and the corresponding number of pixels, and the computing time was 0.74 to 0.82 second depending on the size of apple. 3. The coloration of an apple was expressed as the ratio of the gray value of a reference color to that of a given bounded area of the stem end surface (defined as coloration index), and the computing time was about 3.0 seconds with this algorithm. 4. Defect of an apple could be isolated by lowpass filtering and image subtraction but it took about 20 seconds in computing time. 5. The coloration of the Fuji apple could be classified into 3 to 4 groups by the coloration index and also, it was found that the correlation coefficient between the indices and sugar contents was 0.74. 6. The coloration index obtained from a given bounded area of the stem end side of the Fuji apple could represent the coloration of total surface with a correlation coefficient of 0.922.

• 산업경영시스템학회지
• /
• 제23권55호
• /
• pp.13-24
• /
• 2000

6 sigma movement is the most prominent quality improvement methodology in practice. Measurement plays an important role in helping any organization improve quality. Therefore, the measurement systems analysis is the first step for the quality improvement of manufacturing process in 6 sigma movement. In this study, we investigate the effect of Gage Repeatability and Reproducibility(Gage R&R) in view of defect rate and process capability indices, and provide guidelines for acceptance of gage repeatability and reproducibility(%R&R) for six sigma quality.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.315-326
• /
• 2010

This study examined the overlapping resonances in the systems involving 1 open and 2 closed channels using the phase-shifted version of multichannel quantum-defect theory (MQDT). The results showed that 21 patterns for the q reversals in the autoionization spectra are possible depending on the relative arrangements of the two simple poles and roots of the quadratic equations. Complete cases could be generated easily using the q zero planes determined using only 3 asymmetric spectral line profile indices. The transition of the spectra of the coarse interloper Rydberg series from the lines into a structured continuum by being dispersed onto the entire Rydberg series was found. The overall behavior of the time delays was found to be governed by the dense Rydberg series, which is quite different from the one of the autoionization cross sections that is governed by an interloper, indicating that different dynamics prevail for them. This is in contrast to the two channel system where both quantities behave similarly. The dynamics obtained in the presence of overlapping resonances is as follows. The absorption process is instant and dominated by a transition to the interloper line. This process is followed by rapid leakage into the dense Rydberg series, which has a longer residence time before ionization than that of the interloper state. This is because the orbiting period is proportional to $\upsilon^3$ so that an excited electron has a shorter lifetime in the interloper state belonging to a lower member of the Rydberg series.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.865-870
• /
• 2018

A machine vision based industrial inspection includes defects detection and classification. Fast inspection is a fundamental problem for many applications of real-time vision systems. It requires little computation time and localizing defects robustly with high accuracy. Deep learning technique have been known not to be suitable for real-time applications. Recently a couple of fast region-based CNN algorithms for object detection are introduced, such as Faster R-CNN, and YOLOv2. We apply these methods for an industrial inspection problem. Three CNN based detection algorithms, VOV based CNN, Faster R-CNN, and YOLOv2, are experimented for defect detection on metal surface. The results for inspection time and various performance indices are compared and analysed.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.47-49
• /
• 1999

균일물질의 내부결함으로 발생되는 공기층이나 불순물층은 균일물질과 다른 굴절률을 가지고 있으므로 전자기파가 투과할 때 다굴절이 발생된다. 발생된 다굴절은 공기층이나 불순물층의 두께가 아주 작을 때 시간영역에서의 전자기파분석으로는 그 유무를 판단하는데 한계가 있다. 하지만 주파수영역에서는 다중반사에 의한 총투과율과 위상변화에 의해 그 존재유무를 판단할 수 있으며, 또한 Febry-Perot 이론에 의해 그 두께와 굴절률을 정확히 측정할 수 있다.

• 조명전기설비학회논문지
• /
• 제17권4호
• /
• pp.81-86
• /
• 2003

피크용 분산전원은 계통의 전체 운영비용을 줄일 수 있고, 대기용 분산전원은 수용가의 신뢰도를 향상시킬 수 있다. 피크용 분산전원과 대기용 분산전원은 해석하는데 있어서 다른 모델링을 세워야 하고 그에 따라 다른 방식으로 해석해야 하는데 이를 구현하기 위해서는 Monte-Carlo시뮬레이션 기법이 적합하다고 할 수 있다. 본 논문에서는 순차적 시뮬레이션 기법을 통해 두 가지 분산전원의 영향을 신뢰도 지수로 표현하고 이를 통해 두 가지 분산전원의 장단점을 살펴보도록 하겠다.

• 핵의학기술
• /
• 제16권2호
• /
• pp.49-56
• /
• 2012

좌심실 용적 및 구혈률은 관상동맥질환 환자의 치료에 있어 예후예측 및 경과 관찰에 매우 중요한 지표이며, 현재 게이트 심근관류 SPECT (Myocardial perfusion SPECT)를 이용하여 심근관류 이상을 진단하는 동시에 좌심실 용적 및 구혈률(Ejection fraction, EF)을 측정하는 방법이 널리 사용되고 있다. 게이트 심근관류 SPECT와 심초음파(Echocardiography)로 산출한 좌심실 용적 및 구혈률이 높은 상관성을 가진다는 많은 보고들이 있으나 심근관류결손의 유무와 정도에 상관없이 비교되었으며, 제한된 환자들에서 비교 분석이 시행되었다. 이에 본 연구에서는 $^{201}Tl$ 게이트 심근 관류 SPECT에서 부하기(G-Stress) 및 휴식기(G-Rest) 좌심실 구혈률을 관류 결손 여부와 성별, 심실 용적에 따라 심초음파와 비교하여 그 상관성을 알아보고자 하였다. 2011년 4월부터 2012년 5월까지 본원에서 $^{201}Tl$ 게이트 심근관류 SPECT 검사와 심초음파를 일주일 내 시행한 환자 중 성인 291명(남:여=165:126, 평균나이 $64.6{\pm}10.8$세)을 대상으로 하였다. 이 중 정상으로 진단받은 환자 190명과 가역성 관류결손, 고정 관류결손으로 판정 받은 환자 58명, 43명을 대상으로 연구 분석하였다. 데이터 분석에는 QGS (Quantitative gated SPECT) 소프트웨어를 이용하였고, 자동화된 방식으로 EF, 확장기말 용적(End-diastolic volume, EDV), 수축기말 용적(End-systolic volume, ESV)을 산출하였다. 본 연구에서는 심근관류결손의 가역성 여부와 성별을 기준으로 게이트 심근 관류 SPECT에서의 부하기/휴식기와 심초음파에서의 EF, EDV, ESV를 반복측정 분산분석(repeated-measures anova)과 Bland-Altman 분석을 이용하여 차이를 비교하고, pearson 상관계수를 구하여 각각의 상관관계를 분석 하였다. 전체 환자 중 부하기와 휴식기, 심초음파에서의 EF는 높은 상관관계(G-Stress와 G-Rest r=0.909, G-Stress와 EC r=0.833, G-Rest와 EC r=0.825)를 나타냈으나, 전체 환자 중 EF, EDV, ESV는 통계적으로 유의한 차이를 보였다(p<0.01). 관류 결손 여부에 따른 EF값의 차이는 정상 군에서 통계적으로 유의한 차이를 보였고(p<0.01), 관류 결손이 있는 환자 군에서 통계적으로 유의한 차이를 보였다(가역성 관류결손, 고정 관류결손 p<0.01). 성별에 따라 차이를 분석한 결과, 정상 군 중 남성에서의 EF는 통계적으로 유의한 차이를 보이지 않았고(p>0.05), 여성에서의 EF는 통계적으로 유의한 차이를 보였다(p<0.01). 여성환자 중, 좌심실용적으로 분류하였을 때 평균 확장기말 용적보다 적은 군에서 유의한 차이를 보였고, 평균 보다 큰 군에서는 통계적으로 유의한 차이를 보이지 않았다. $^{201}Tl$ 게이트 심근 관류 SPECT 중 부하기 및 휴식기에서의 좌심실 구혈률과 심초음파와의 상관관계는 전체적으로 높은 것으로 나타났다. 하지만 EF, EDV, ESV는 통계적으로 유의한 차이를 보였다. 관류 결손의 정도, 성별, 좌심실 용적은 LVEF의 정확성에 영향을 미칠 수 있을 거라 사료되며, 이에 대한 추가적인 연구가 필요할 것이다.