• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.1073-1076
• /
• 2005

Since the size of biosequence database grows exponentially every year, it becomes impractical to use Smith-Waterman algorithm for exact sequence similarity search. For fast sequence similarity search, researchers have been proposed heuristic methods that use the frequency of characters in subsequences. These methods have the defect that different sequences are treated as the same sequence. Because of using only the frequency of characters, the accuracy of these methods are lower than Smith-Waterman algorithm. In this paper, we propose an algorithm which processes query efficiently by indexing the frequency of characters including the positional information of characters in subsequences. The experiments show that our algorithm improve the accuracy of sequence similarity search approximately 5${\sim}$20% than heuristic algorithms using only the frequency of characters.

• Journal of Sensor Science and Technology
• /
• v.17 no.6
• /
• pp.437-446
• /
• 2008

Single crystalline ${ZnIn_2}{Se_4}$ layers were grown on thoroughly etched semi-insulating GaAs (100) substrate at $400^{\circ}C$ with hot wall epitaxy (HWE) system by evaporating ${ZnIn_2}{Se_4}$ source at $630^{\circ}C$. The crystalline structure of the single crystalline thick films was investigated by the photoluminescence (PL) and Double crystalline X-ray rocking curve (DCRC). The carrier density and mobility of ${ZnIn_2}{Se_4}$ single crystalline thick films measured from Hall effect by van der Pauw method are $9.41{\times}10^{16}cm^{-3}$ and $292cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the ${ZnIn_2}{Se_4}$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)$=1.8622 eV-$(5.23{\times}10^{-4}eV/K)T^2$/(T+775.5 K). After the as-grown ${ZnIn_2}{Se_4}$ single crystalline thick films was annealed in Zn-, Se-, and In-atmospheres, the origin of point defects of ${ZnIn_2}{Se_4}$ single crystalline thick films has been investigated by the photoluminescence (PL) at 10 K. The native defects of $V_{Zn}$, $V_{Se}$, $Zn_{int}$, and $Se_{int}$ obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment in the Se-atmosphere converted ${ZnIn_2}{Se_4}$ single crystalline thick films to an optical p-type. Also, we confirmed that In in ${ZnIn_2}{Se_4}$/GaAs did not form the native defects because In in ${ZnIn_2}{Se_4}$ single crystalline thick films existed in the form of stable bonds.

• Journal of Energy Engineering
• /
• v.22 no.3
• /
• pp.294-301
• /
• 2013

The accidents related to boilers are caused by defects with high risk which can lead to the explosion of the equipment. The number of boiler accidents from 1979 to 2006 is 100 andthe casualties totaled 379, and the scale of accidents has been growing larger every year. The analysis has found that the number of accidents caused by carelessness in management is 59, 72% of total 82 cases and 18by low level of water. The analysis of accidents in foreign countries showed a similar result. From the past till today most of the accidents have been resulted from bad handlingand maintenance. The analysis of accidents for the inspected boilers also showed that the major cause of the accidents was bad handling and maintenance of automatic controllers, safety devices, etc. And in the large-scale explosive accidents, the number one cause of them was the low level of water.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.3
• /
• pp.195-202
• /
• 2015

NHPP software reliability models for failure analysis can have, in the literature, exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, finite failure NHPP models that assuming the expected value of the defect and infinite failures NHPP models that repairing software failure point in time reflects the situation, were presented for comparing property. Commonly used in the field of software reliability based on exponential power distribution software reliability model finite failures and infinite failures were presented for comparison problem. As a result, finite fault model is effectively infinite fault models, respectively. The parameters estimation using maximum likelihood estimation was conducted. In this research, software developers to identify software failure property some extent be able to help is considered.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.41-46
• /
• 2011

The purpose of this paper is to analyze the causes of accidents related to the 3 phase 170 kV gas insulated switchgear of a power system collected from accident sites to secure data for the prevention of similar accidents and provide important points of view regarding diagnosis for the prevention of accidents involving gas insulated switchgears. The analysis results of the causes of accidents involving gas insulated switchgears showed deformation of the manipulation lever installed at the S-phase, disconnection of the insulation rod connection, melting of the upper conductor, a damaged tulip, damage to the lower spacer and the spacer at the breaker, etc. It is believed from this result that the potential for accidents has expanded due to accumulated energy as a result of repeated deterioration. The carbonization depth of a GIS was formed near the screw (T2, T3) used to secure the lower pole of the S-phase tulip. It is not known what has caused the screws to be extruded and melted. However, it is thought that an unbalanced electromagnetic force, micro-discharge, surface discharge, etc., have occurred at that point. In addition, even though 16 years have passed since its installation, there was no installation defect, act of arson, accidental fire, etc. General periodical inspection and diagnosis failed to find the factors causing the accidents. As a system contained in a closed metal container, it has a high risk factor. Therefore, it is necessary to design, install and operate a GIS in accordance with the standard operational procedure (SOP). In addition, it is necessary to apply conversion technology for periodical SF6 gas analysis and precision safety diagnosis. It is expected that tracking and managing these changes in characteristics by recording the results on the history card will provide a significant accident prevention effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6282-6288
• /
• 2014

$CO_2$ welding is used widely in the field. On the other hand, welding defects occur when welders cannot adjust the current and voltage needed for welding and have to stop working to adjust the current and voltage, causing sudden cooling down of the welding structure inside a vehicle or tank where the control panel is invisible or when work site is far. This study used three types of existing $CO_2$ welders. This also applied SS400 rolled steel for welding structural purposes for remote control torch welding, perform a welding test through v-groove butt welding with a remote control torch and existing $CO_2$ welding torch, conducted visual inspection on the appearance of a welded top bead. In addition, the appearance quality of the welding part was monitored mainly through penetrant testing and a bending test to evaluate the welding defect reduction and the effect on the performance and compatibility by replacing the existing welder.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.11
• /
• pp.29-35
• /
• 2015

The photo-response characteristics of polysilicon based metal-semiconductor-metal (MSM) photodetector structure, depending on deuterium treatment method, was analyzed by means of the dark-current and the light-current measurements. Al/Ti bilayer was used as a Schottky metal. Our purpose is to incorporate the deuterium atoms into the absorption layer of undoped polysilicon, effectively, for the defect passivation. We have introduced two deuterium treatment methods, a furnace annealing and an ion implantation. In deuterium furnace annealing, deuterium bond was distributed around polysilicon surface where the light current flows. As for the ion implantation, even thought it was a convenient method to locate the deuterium inside the polysilicon film, it creates some damages around polysilicon surface. This deteriorated the photo-response in our photodetector structure.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.10
• /
• pp.385-390
• /
• 2021

The gantry is a device that moves fine chips from the feeder to the PCB. While the gantry is moving the part, the camera checks the condition of the part. The purpose of this paper is to find the path with the shortest travel time of the gantry and calculate the travel time according to the path. stop_motion is a way to check the status of the parts currently in use. This paper presents the moving_motion method and the fly_motion method with maximum speed in front of the camera. In addition the signature method was used to inspect the condition of the parts. When comparing the moving time of the three types of gantry, the moving_motion method improved by 9.42% and the fly_motion method by 17.73% compared to stop_motion. When the fly_motion method proposed in this paper is used for the gantry movement path, it is expected that productivity will be improved.

• Journal of IKEEE
• /
• v.25 no.3
• /
• pp.548-555
• /
• 2021

This paper outlines the basic concepts, approaches and research trends of fault diagnosis and fault tolerant control applied to industrial processes, facilities, and motor drives. The main role of fault diagnosis for industrial processes is to create effective indicators to determine the defect status of the process and then take appropriate measures against failures or hazadous accidents. The technologies of fault detection and diagnosis have been developed to determine whether a process has a trend or pattern, or whether a particular process variable is functioning normally. Firstly, data-driven based and model-based techniques were described. Secondly, fault detection and diagnosis techniques for industrial processes are described. Thirdly, passive and active fault tolerant control techniques are considered. Finally, major faults occurring in AC motor drives were listed, described their characteristics and fault diagnosis and fault tolerant control techniques are outlined for this purpose.

• Physical Therapy Korea
• /
• v.28 no.2
• /
• pp.132-137
• /
• 2021

Background: Flat feet can be identified by assessing the collapse of the medial longitudinal arch (MLA) and these conditions can trigger epidemiological changes in the feet. Many of previous studies compared the muscle activity of lower body in terms of intervention and dynamics to treat the structural defect of flat feet. However, few studies have investigated or analyzed the muscle activity of gastrocnemius muscle in the subjects with flat feet. Objects: This study investigated the differences in changes of medial and lateral plantar flexors in subjects with flat feet during bipedal heel-rise (BHR) task and analyzed the differences in muscle activity between two groups by measuring the electromyography (EMG) of abductor hallucis (AH), tibialis anterior (TA), medial gastrocnemius (MG), lateral gastrocnemius (LG). Methods: A total of Twenty one adult females participated in this experiment. Subjects were assigned to groups according to the navicular drop test. The task was applied to the leg, where the heel lifting action prevailed. The muscle activity of the medial and lateral feet plantar flexors was evaluated, and the % maximum voluntary isometric contractions (%MVIC) of these were compared. Results: For the difference between groups the muscle activity (%MVIC) of LG muscle was statistically significantly low in flat feet group compared to healthy feet group (flat feet: 64.57, healthy feet: 90.17; p < 0.05). Conclusion: The results of this study will contribute to identifying the muscle activities of medial and lateral feet plantar flexors among subjects with flat feet, which can cause abnormal epidemiological changes in the feet.