• Journal of the Korean Vacuum Society
• /
• v.17 no.6
• /
• pp.566-575
• /
• 2008

We investigated the field emission characteristics from the planar field emitters made of double-walled carbon nanotubes (DWCNTs) synthesized by a catalytic chemical vapor deposition (CCVD) method. Transmission electron microscopy, Thermogravimetric and Raman analysis showed that the carbon materials have a low defect level in their atomic carbon structure, pointing to the synthesis of high-purity DWCNTs. For field emission properties of DWCNTs, the turn-on field of DWCNTs was $1.9\;V/{\mu}m$ and the current density was about $74\;mA/cm^2$ at $8.1\;V/{\mu}m$, which is sufficient for the applications of field emission displays and vacuum microelectronic devices. The DWCNT field emitters also exhibited a uniform field emission pattern and good field emission stability in a diode configuration.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.27-31
• /
• 2009

In this paper, the polymer adhesive bonding technology using wafer-level technology was investigated and warpage results were analyzed. Si and glass wafer was bonded after adhesive polymer layer and dam pattern for uniform state was patterned on glass wafer. In this study, warpage result decreased as the low of bonding temperature of Si wafer, bonding pressure and height of adhesive bonding layer. The availability of adhesive polymer bonding was confirmed by TC, HTC, Humidity soak test after dicing. The result is that defect has not found without reference to warpage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.2
• /
• pp.259-266
• /
• 1998

406MHz and INMARSAT-E EPIRB facility transmits the distress alerts by the relay of the polar-satellites and INTELSAT, but may cause the probability of delayed transmission because of the orbital period and not compliance with the implementation of GMDSS rules for small ships in A1 area.. Digital Selective Calling forms a critical part of the terrestrial elements of the GMDSS system and ensures the reliability and the efficiency in the system. In this paper, we suggests that new DSC EPIRB in the VHF band to overcome this defect for small ships in A1 area, and analyze the ITU-R recommendations and technical characteristics, design and implement the algorithm of calling sequences, frequency synthesizer for the RF signal and FSK moulation signals.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.139-144
• /
• 2000

This paper presents development of meander monitoring system base reliable detection at conveyer belt used for materials transport line of steel company. Conventional detection method is losed the confidence, because of the place with bad surroundings of measurement so much that materials production line are completely exposed to dust, moisture and vibration. For the solution of this problem, we developed infrared meander detection system using the infrared sensor array and one chip microprocessor which is available for bad surroundings and inexpensive. The reliability of the system was estimated by experiment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5398-5404
• /
• 2011

Environment-friendly vehicles using electricity vary, but electrical motor, battery, BMS, inverter, converter, etc., are the core technologies. This research paper deals with the die design and manufacture of the terminal part, one of the key parts of the electrical motor. This research sought to introduce problems such as assembly defect, correction of the R-part shape, correction of the location between holes, etc., in the process of manufacturing the electrical motor terminal die and to produce final products by correcting the problems that were tackled herein.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.1
• /
• pp.30-35
• /
• 2002

Dynamic routing uses routing protocols to select the best routes and to update the routing table. RP (Routing Information Protocol)using a distance-vector algorithm becomes generally known a routing protocol on the network. RIP selects the route with the lowest "hop count" (metric) as the best route. but RIP has a serious shortcoming. a mP router cannot maintain a complete routing table for a network that has destinations more than 15 hops away. To overcome this defect, It uses the OSPF (Open Shortest Path First) of link -state protocols developed for TCP/IP. It is suitable for very large networks and provides several advantages over RIP. This paper analyzes the traffic and the link efficiency between two protocols such as message delivery and delay, link utilization, message counts on the same network.e network.

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.379-381
• /
• 1994

Volume holograms recorded in photorefractive materials can find important applications in optical memories and optical computing systems. One problem with a photorefractive hologram is that it gets erased by the readout light. Nondestructive readout can be achieved by hologram fixing, and several fixing methods have been reported. Fixing is accomplished by thermally activated motion of an unknown ionic defect, which neutralizes the electronic space-charge patterns. At room temperature the ionic patterns are stabilized. When the electrons are partially redistributed by light, a net space-charge pattern appears, and tile fixed hologram can be read out. In this paper, theoretical modeling and some experimental results are presented for thermal fixing of volume phase holograms in photorefractive $LiNbO_3$:Fe. Thermal fixing can be done during or after recording and depends on fixing temperature ($100{\sim}200^{\circ}C$ range) and grating length. Fixed Slating can be erased completely at the temperature over $300^{\circ}C$. Theoretical modeling shows weil the compensation of electronic Slating by ionic grating and is in good agreement with experimental results. In experiments the dependence of thermal fixing on temperatures and grating lengths is investigated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.150-153
• /
• 2004

본 논문에서는 780 nm 고출력 레이저 다이오드의 신뢰성을 향상시키기 위하여 DLTS(deep level transient spectroscopy)을 이용하여 MOCVD(metalorganic chemical vapor deposition) 성장 조건 변화에 따른 $Al_{0.48}Ga_{0.52}As$와 $Al_{0.1}Ga_{0.9}As$ 물질에서의 깊은준위(deep level)의 거동을 조사하였다. DLTS 측정결과, MOCVD로 성장된 막에서만 나타나는 결함(defect)으로 추정되는 trap A(0.3 eV), DX center로 알려진 trap B, 갈륨(Ga) vacancy와 산소(O2) 원자의 복합체(complex)에 의한 결함인 trap D(0.6 eV) 및 EL2 라고 불리우는 trap E(0.9 eV)의 네 가지 깊은준위들이 관측되었고, 성장 조건의 변화에 따라 깊은 준위들의 농도가 감소하는 것을 관측함으로써 최적 성장 조건을 찾을 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1035-1037
• /
• 2005

The analysis of magnetic fields(2-D) induced by line currents, such as Overhead Trolley Lines or Transmission Lines, is not so easy by using the standard Finite Element Method(FEM). Mesh generation is one of the most important processes in the standard FEM. Because, the current region is relatively small compared with whole region, and actually is a line without thickness, the mesh refinement around the source lines yields many demerits. A way of supplement such a defect, we proposed the coupling scheme of analytical solution and FEM. In this study, the analytical solution is adopted around the region of line currents and FE solution is a lied to the rest of source region. And the two types of solution are coupled at the artificial boundary. To verify the usefulness of proposed algorithm, simplified model with magnetic material in FE region is chosen and analyzed. The results are compared with those of standard FEM. And the errors between them can be reduced by increasing harmonic orders.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.946-949
• /
• 2005

It is very a time-consuming and error-prone process to obtain the optimal injection condition, which can produce good injection molding products in some operational variation of facilities, from a seed injection condition. This study proposes a new approach to search the optimal injection molding condition using a neural network and a genetic algorithm. To estimate the defect type of unknown injection conditions, this study forces the neural network into learning iteratively from the injection molding conditions collected. Major two parameters of the injection molding condition - injection pressure and velocity are encoded in a binary value to apply to the genetic algorithm. The optimal injection condition is obtained through the selection, cross-over, and mutation process of the genetic algorithm. Finally, this study compares the optimal injection condition searched using the proposed approach. with the other ones obtained by heuristic algorithms and design of experiment technique. The comparison result shows the usability of the approach proposed.