• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.11
• /
• pp.76-83
• /
• 2007

The dark-field laser scattering system has been developed to inspect surface defects in infrared cut-off filters and then laser scattering characteristics against the defects are investigated. The qualitative analysis for the reliable and accurate detection performance is described through the correlation between incident angles of a laser and viewing ones of a camera. In this paper, reliable and important information with laser scattering is given for the surface defect inspection of IR filters. Its performance has been verified through various experiments.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.16-19
• /
• 2002

Random and/or periodic defects occur in all spun yarns. These irregularities can often lead to defects in finished fabric. Yarn evenness tests are used to obtain statistical data about yarn properties, such as CV%, which is useful in comparing several sets of similar data that differ in mean value but may have some commonality in relative variation. Although this statistical data is helpful in determining relative yarn Quality, accurate predictions of how the yarn will appear in fabric form are still difficult to obtain. As an promising alterative, wavelet analysis has been employed to localize yam defect so as to predict the visual qualifies of the fabrics.

• Journal of Mechanical Science and Technology
• /
• v.19 no.3
• /
• pp.820-825
• /
• 2005

This paper proposes non-destructive ESPI technique to evaluate inside defects of semiconductor package quantitatively. Inspection system consists of ESPI system, thermal loading system and adiabatic chamber. The technique has high feasibility in non-destructive testing of semiconductor and gives solutions to the drawbacks in previous technique, time-consuming and the difficulty of quantitative evaluation. In result, most of defects are classified in delamination, from which it is inferred to the insufficiency of adhesive strength between layers and nonhomogeneous heat spread. The $90\%$ of tested samples have a delamination defect started at the around of the chip which may be related to heat spread design.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.20-24
• /
• 2004

Antifatigue failure technology take an important the part of current industries. Currently, the shot peening is used for removing the defect from the surface of steel and improving the fatigue strength on surface. Therefore in this paper the effect of compressive residual stress by shot peening on fatigue crack growth characteristics in stress ratio(R=0.1, 0.3, 0.6)was investigated with considering fracture mechanics. There is difference between shot peening specimen and unpeening specimen. Fatigue crack growth rate of shot peening specimen was lower than that of unpeening specimen. Fatigue lift shows more improvement in the shot peening material than in the unpeening material. And compressive residual stress of surface on the shot peening processed operate resistance force of fatigue crack propagation. That is the constrained force about plasticity deformation was strengthened by resultant stress, which resulted from plasticity deformation and compressive residual stress in the process of fatigue crack propagation.

• Interaction and multiscale mechanics
• /
• v.4 no.2
• /
• pp.139-153
• /
• 2011

In this paper we develop a fully anisotropic pressure and temperature dependent model to investigate the effect of the microstructure on the shock response of ${\beta}$-HMX molecular single and polycrystals. This micromechanics-based model can account for crystal orientation as well as crystallographic twinning and slip during deformation and has been calibrated using existing gas gun data. We observe that due to the high degree of anisotropy of these polycrystals, certain orientations are more favorable for plastic deformation - and therefore defect and dislocation generation - than others. Loading along these directions results in highly localized deformation and temperature fields. This observation confirms that most of the temperature rise during high rates of loading is due to plastic deformation or dislocation pile up at microscale and not due to volumetric changes.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.2E
• /
• pp.91-97
• /
• 2002

One of the most important things in mobile phone service is Hand-Off (H/O). Meantime soft H/O and softer H/O have been used between the same generations (2G↔2G) and there is little problem. With user's needs and the development of communication technology, the system with different generation coexists and pilot beacon and time-periodic beacon are used for H/O between generations (2.5G↔2G) to start service, but it is not economic and efficient. To improve such problems, ENHHO developed in April 2001 has recently used. Unfortunately, this method also has the defect of momentary cutoff of communication information during the procedure of H/O in case of more than 5 pilot signals. Accordingly, we suggest algorithm to improve the problem of ENHHO and examines its propriety by analyzing the results of field survey using the algorithm.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1973-1974
• /
• 2006

The mean shift algorithm has achieved considerable success in object tracking due to its simplicity and robustness. It finds local maxima of a similarity measure between the color histograms of the target and candidate image. However, the mean shift tracking algorithm using only color histograms has a serious defect. It doesn't use the spatial information of the target. Thus, it is difficult to model the target more exactly. And it is likely to lose the target during the occlusions of other objects which have similar color distributions. To deal with these difficulties we use both color information and spatial information of the target. Our proposed algorithm is robust to occlusions and scale changes in front of dynamic, unstructured background. In addition, our proposed method is computationally efficient. Therefore, it can be executed in real-time.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.57
• /
• pp.63-76
• /
• 2000

In today's competitive, market-driven world, a company's survival rests in its ability to provide quality performance products accompanied by total customer satisfaction. To satisfy the needs of customers, companies strive for defect free performances. This requires companies establish an integrated quality management system based on ISO 9000, ISO 14000, QS-9000, AS-9000, TL-9000, 100 PPM, and six sigma. This paper suggests that how to integrate implementation of quality certification systems and six sigma is an important approach in the continuous quality improvement, and six sigma efforts have become one of the key success approach. Through the various survey of total quality management system approach, it is intended to provide a chance to benchmark or give a cue on how to conduct the quality management innovation.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.99-107
• /
• 2008

Product liability(PL) is the producer's compensation to customers for damage incurred by product defects. This paper studies on the organizational culture, promotion process, system construction, system level, product safety review, product safety assurance, system operation, and its effectiveness and necessity of recognition for the PL system of small and medium-sized firms in Gangwon-Do province. The results show that the firms have product safety regulations, but the number of firms which its employees understand the regulations is less than the number of firms which do not understand. Also the number of firms which is preparing PL prevention and insurance, and counterplan for accidents seems to be not in large numbers.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.3
• /
• pp.133-141
• /
• 1997

In the process of car body design, various surfaces are generated from the given boundary curves. Depending upon the method of the surface generation and the quality of the boundary curves provided, the resulting surfaces may have global or local irregularities in many cases. Thus it would be necessary for the designer to evaluate the surface quality and to modify the surface or to use the different generation method based on the evaluation results. This capability is very important because the defect of the surface quality detected in the production stage will require the rework of the dies and will cause a big loss in cost and time. A method of surface interrogation using reflection line is introduced. In this paper, We applied reflection mapping to generate reflection lines on the trimmed NURBS surface. Since reflection lines are obtained from reflection mapping that uses simple and physically acceptable mapping algorithm, they can be efficiently used to simulate the reflection test on the real part in the production line.