• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.946-951
• /
• 2001

This experimental study is to investigate the intermittent spray characteristics of a pintle nozzle. High speed camera used in this expreiment with 9000fps. The factor, which controls the diesel spray, is the Injection pressure, ambient pressure and ambient temperature. In this paper, experiments were conducted free spray for the ambient pressure(3, 4, 5Mpa), nozzle Injection pressure(10, 14, 18MPa) and ambient temperature(293, 473K). With the higher opening pressure, the spray tip velocity and spray penetration increases while the spray angle decreases, On the other hand, With the higher ambient pressure, the spray angle increase while the spray tip penetration and spray tip velocity decrease. also, With the higher ambient temperature, the spray penetration decrease while the spray angle decrease.

• Journal of Life Science
• /
• v.5 no.2
• /
• pp.57-62
• /
• 1995

Casein or soybean protein was subjected to there action with caffeic acidtyrosinase system at 30-35$\circ$C, pH 6.8 with aeration for 5hr. The resulting brown proteins were washed with acetone until the washings were on longer colored. However, modified protein still retained a light brown. The effects of the modified proteins and brown compounds on male Wistar strain rats were studied by pair-feeding of a cholesterol-free diet for 14days. Significant decrease in protein digestibility for the rats fed with the modified proteins were observed. Weight gain and protein digestibility were not influenced by feeding brown compounds, but the feeding of brown compound from casein caused an enlargement of caecum. The concentrations of serum cholesterol and triglyceride in the rats fed with modified proteins and brown compounds were mostly unchanged against the rats fed with untreated proteins. These results suggest that the decrease in protein digestibility induced by enzymic browning-reaction did not cause the decrease in concentration of serum cholesterol.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.2
• /
• pp.173-178
• /
• 2007

This paper is to establish an appropriate model for predicting the temperature decreases in the batch transferred from the refining process to the caster in steel-making companies. Mathematical modeling of the temperature decreases between the processes is difficult, since the reaction mechanism by which the temperature changes in a molten steel batch is dynamic, uncertain and complex. Three soft computing techniques are examined using the same data, namely the multiple regression, fuzzy regression, and neural net (NN) models. To compare the accuracy of these three models, a limited number of input variables are selected from those variables significantly affecting the temperature decrease. The results show that the difference in accuracy between the three models is not statistically significant. Nonetheless, the NN model is recommended because of its adaptive ability and robustness. The method presented in this paper allows the temperature decrease to be predicted without requiring any precise metallurgical knowledge.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.1
• /
• pp.49-57
• /
• 1986

The vibrations problem of thin orthotropic skew plates of linearly varying thickness is analyzed using the small deflection theory of plates. Using dimensionless oblique coordinates, the deflection surface can be expressed as a polyonmial series satisfying the boundary conditions. For orthotropic plates which is clamped on all the four edges, numerical results for the first two natural frequencies are presented for various combinations of aspect ratio, skew angle and taper parameter. The properties of material used are one directional glass fibre reinforced plastic GFRP. The results obtained may be summarised as follows: 1. In case of the first mode vibration of plates with increase in the skew angle, the natural frequencies of plates decrease. 2. As the aspect ratio decrease, the natural frequencies of plates decrease. 3. For the identical skew angle, natural frequencies of plates increase with the taper parameter of thickness.

• Journal of the Korean Ceramic Society
• /
• v.23 no.1
• /
• pp.1-6
• /
• 1986

The shrinkage rate of solid state sintering has been theoretically derived by combining the rate equation of material transport and the net free energy change resulting from the decrease of solid-vapor interface and the increase of grain boundary during sintering. For a sinteing model an idealized situation of the spherical particles with BCC packing was taken as the initial condition and the shrinkage was assumed to occur by forming the flat circualr grain boundaries on each particle. The plotted shrinkage rates as a function of grain boundary to surface energy ratio $(gamma_g/gamma_s)$ have shown that the relative density increases linearly at the initial stage of sintering but the shrinkage rate is decreased upon further sintering due to a decrease in driving force for densificaton. It has been also shown that the densification is critically affected by the $gamma_g/gamma_s$ ratio. In order to get the complete densificatin the ratio should be less than $sqrt{3}$. Any additive or atmospheric condition causing the decrease of$_g/gamma_s$ ratio will enhance sintering.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.3
• /
• pp.187-193
• /
• 1990

In the present experiment, the relationship between rumination and the amount of roughage eaten by sheep was investigated in detail. Daily time spent eating was obviously changed along with an increase or decrease in daily hay intake. Daily time spent ruminating and daily number of boli regurgitated was also linearly increased or decreased with an increase or decrease of daily hay intake, and there were regression lines between daily amount of hay eaten and daily ruminating time or daily number of boli with statistical significant coefficients. Cyclic rate (total rumination time(s)/number of boli regurgitated) and daily number of rumination periods did not change in an outline along with the changes in daily hay intake. From these results, it can be suggested that daily dry matter intake by sheep could be presumed by measuring daily time spent ruminating when they were fed only roughage feed.

• Structural Engineering and Mechanics
• /
• v.65 no.3
• /
• pp.343-348
• /
• 2018

This paper reports mechanical behavior of recycled fine aggregate concretes after high temperatures. It is found that compressive strength of recycled fine aggregate concretes decline significantly as the temperature rises. The elastic modulus of recycled fine aggregate concretes decreases with the increase in temperature, and the decrease is much quicker than the decrease in compressive strength. The split tensile strength of recycled fine aggregate concrete decrease as the temperature rises. Through the regression analysis, the relationship of the mechanical behavior with temperature are proposed, including the compressive behavior, elastic modulus and split tensile strength, which are fitting the test data.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.316-316
• /
• 2014

Two different transparent conducting oxide (TCO) layers of Al-doped ZnO (AZO) and $WO_3$ were prepared by a rf sputtering process. Working pressure, deposition time, and target-to-substrate distance were varied for the sputtering process to improve electrical properties of the resulting layer. Thickness of the TCO layers was measured by a profile meter of ${\alpha}$-step. To evaluate the electrical conductivity, surface resistivity of the TCO layers was measured by a four-point probe technique. Decrease of the working pressure resulted in increase of deposition rate and decrease of surface resistivity of the resulting layer. Increase of the layer thickness due to increased deposition time resulted in decrease of surface resistivity of the resulting layer. The shorter the target-to-substrate distance was, the lower was the surface resistivity of the resulting layer.

• The Journal of Korean Physical Therapy
• /
• v.5 no.1
• /
• pp.79-87
• /
• 1993

The purpose of this literature review was to identify the physiological changes with aging. The results of this renew were to follows : We have seen a wide variety of such changes in the cells and in all organ systems. 1. At least 40 percent of people over 65 will die of cardiac disease, 15 percent of cerebrovascular disease, and possibly another 5 percent of other types of vascular impairment. 2. The increase rigidity of the thoracic wall and the decreased strength of the expiratory muscles decrease the propulsive effectiveness of the cough. 3. The density of capillaries per motor units is decreased. 4. Starting before age 40 in both sexes there is a shift from an increase in bone mass to a progressive decrease. 5. Histologic studies show a lim age-correlated decrease in the number of Pacini's. Merkel's, and Meissner's corpuscles.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.2
• /
• pp.214-221
• /
• 2014

The deterioration in wood by the brown-rot fungus (Fomitopsispalustris) and the white-rot fungus (Trametesversicolor) were measured using ultrasonic velocity. Those were used for the decay exposure and 4 wood species of wood as the test specimens, Pinusdensiflora, Larixkaempferi, Pinuskoraiensis and Pinusrigida, were chosen with both the brown- and white-rot culture petridish during 12 weeks. After 12 weeks, the decrease rate of ultrasonic velocity was measured at 10~15%. In both brown- and white-rot exposure experiments, P. rigida showed significant decrease in ultrasonic velocity (20%), L. kaempferi on the other hand did not show decrease in ultrasonic velocity. After the fungal exposure experiment, the inside of specimens was investigated by computer tomography (C/T). After C/T investigation, bending tests were performed.