• Knowledge Management Research
• /
• v.18 no.1
• /
• pp.117-138
• /
• 2017

While prior work has noted the importance of knowledge creation in gaining competitive advantages, much less is understood about why firms do not actually use what they create. Building upon institutional approaches to organization studies, we offer a new framework to explain the gap between knowledge creation and utilization. We test our framework in an empirical context of sustainable innovation and environmental technologies where ideas of environmental sustainability have recently gained public popularity and shaped how interested audiences make evaluative assessments of firms. In such a context, firms are apt to perceive the social attention toward sustainability to be a normative pressure, which causes them to create new knowledge and develop technologies consistent with the pressure. Using data from the government-initiated certification system for green technologies, our study finds that firms do not always fully implement new environmental technologies they develop in response to the certification program, the situation we refer to as knowledge decoupling. We also examine a set of conditions under which knowledge decoupling becomes more or less amplified. Taken together, our findings show how a firm's knowledge creation and utilization is shaped by its external institutional environment as well as internal learning processes.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.1
• /
• pp.25-37
• /
• 1992

Interior noise in a car is known to have an important influence on product acceptability. This noise is closely correlated with structural-acoustic vibration. When considering noise problem, the structural-acoustic relation of a vehicle cabin model needs to be identified. However, it is very difficult to get the modal parameters of this kind of cabin structure composed of thin plates: because it not only can be excited by the acoustic vibration of cavity, but also tends to have decoupling effects of one plate from another. In order to obtain modal parameters more precisely, various excitation techniques, i.e. impact, pure random, burst random, and swept sine testing are applied for the first step. In the case of the cabin model, impact and swept sine testing show good results. Next, the determination of the excitation point by trial- and-error and the accurate measurements of FRF's are performed with these methods. The modal parameter extraction is carried out for the final step. This paper proposes a new approach to find the modal parameters more reliably in the case of high decoupling effects. That is, the convergence of MIF and MCF in each panel, which provide some criteria for the validity of the obtained modal parameters, is observed. And from those results, the pretty accurate modal parameters can be determined. A comparative assessment between the modal testing and the FEM is also performed.

• Asia-Pacific Journal of Business
• /
• v.13 no.1
• /
• pp.1-17
• /
• 2022

Purpose - This study was aimed to investigate whether the outcomes of green innovation brought positive effects to Chinese firms' ESG performance. Design/methodology/approach - Green innovation patents and ESG performance data of Chinese listed firms were empirically analyzed using panel data fix-effect linear estimations. Findings - The study found that green innovation performance enhanced Chinese firms' ESG performance. Also, the results showed that corporate social responsibility decoupling weakened this relationship and state ownership positively moderated this relationship, whereas corporate philanthropic giving did not have significant impact. Research implications or Originality - The findings indicated that green innovation was beneficial to enhancing corporate sustainability performance. In addition, the study highlighted the role of CSR communications and state ownership in interacting the positive effect that green innovation performance brings to corporate ESG performance.

• Journal of Digital Convergence
• /
• v.10 no.6
• /
• pp.111-131
• /
• 2012

Mass Customization combines the advantages of mass production and customization. Mass customization has been praised as an innovative approach that would result in changes in business paradigm. However, there is no consensus on the concept of mass customization, but only a generally accepted framework exists to explain successful practices. Prior cases in mass customization are those of the small-medium sized or Internet-based companies. We in this paper explore the mass customization cases of market-leading manufacturers. Although those traditional organizations may be not for swift change, the cases of those companies are important because they target mass markets. Lampel and Mintzberg[35] proposed a continuum of strategies ranging from pure standardization to pure customization. This study investigates mass customization strategies of three companies. In this paper, the cases of cosmetics and sports shoe can be described as tailored customization, and the household appliances case can be classified as customized standardization. These three cases are compared with each other from the customers' decoupling point. Findings and implications of this research are discussed.

• Environmental and Resource Economics Review
• /
• v.30 no.2
• /
• pp.269-297
• /
• 2021

Bioplastics are attracting attention as a substitute for conventional petroleum-based plastics because they are carbon neutral and can be biodegradable. This study estimated economic and environmental impact of regulating the petroleum-based plastics industry and fostering the bioplastics industry using a Recursive Dynamic CGE Model of the Korean Economy. Results show that the regulation of the conventional plastics industry exhibits a positive environmental impact by reducing greenhouse gases and plastic waste and a negative economic impact with a decrease in GDP. Meanwhile, fostering the bioplastics industry with regulation on conventional plastics industry has similar levels of greenhouse gas and waste reduction effects when there is only regulation on the conventional plastics industry. It is also shown that expanding the production of bioplastics industry offsets existing economic losses as a form of increased GDP. If petroleum-based plastics are replaced through the expansion of bioplastics production, it can contribute to the decoupling of greenhouse gas emissions and plastic waste from economic growth.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.163-172
• /
• 1995

100 MW급 유류연소 드럼형 열병합발전소의 주증기온도 제어를 위한 비선형 process model based control (PMBC)을 개발하고 그 성능을 PID 알고리즘과 비교하였다. 비선형 PMBC에서는 프로세스의 메캐니즘을 비교적 충실히 반영하는 모델이 필요한데, 사용된 모델은 first principle approach를 사용하여 개발된 것으로 제어기 성능 평가와 설계에 적합한 정교한 것이다. 비선형 PMBC는 비선형 피드백, feedforward, decoupling을 제공하고 분산제어에 적합하면서 모델링 오차에 민감하지 않은 장점이 있다. PMBC와 PID 제어의 성능을 부하증가와 연료의 열량변화등의 외란에 비교한 결과, PMBC가 PID에 비하여 속응성, 절대오차 적분치, 제어노력등에서 월등하게 우수한 것을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.15-22
• /
• 2004

This paper presents the channel analysis considering power distribution network(PDN) system of PCB. For achieve the target PDN system we proposed the useful design approach for acquiring the characteristic target of power distribution network in overall frequency ranges. The proposed method is based on the hierarchical approach related to frequency ranges and the path-based equivalent circuit model to consider the interference of the current paths between the decoupling capacitors and the board through it is a lumped model for fast and easy calculation, experimental results show that the proposed model is almost as precise as the numerical analysis. The analysis of PDN system shows that although the effective inductance of package dominatly affects the power noise and the signal transfer through data channel, the board PDNs also can not be neglected for achieving the accurate channel signaling. Therefore, we must design concurrently the chip, package, and board from the initial spec design of high speed digital system.

• Journal of Power Electronics
• /
• v.17 no.2
• /
• pp.411-421
• /
• 2017

An approach based on a 2D lumped model is presented to quantify the voltage transfer gain (VTG) in power converter low power planes. The advantage of the modeling approach is the ease with which typical noise reduction devices such as decoupling capacitors or ferrite beads can be integrated into the model. This feature is enforced by a new modular approach based on effective matrix partitioning, which is presented in the paper. This partitioning is used to decouple power plane equations from external device impedance, which avoids the need for rewriting of a whole set of equation at every change. The model is quickly solved in the frequency domain, which is well suited for an automated layout optimization algorithm. Using frequency domain modeling also allows the integration of frequency-dependent devices such inductors and capacitors, which are required for realistic computation results. In order to check the precision of the modeling approach, VTGs for several layout configurations are computed and compared with experimental measurements based on scattering parameters.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.12 s.354
• /
• pp.23-32
• /
• 2006

Fast and accurate power bus design (FAPUD) method for multi-layers high-speed digital boards is devised for the power supply network design tool for accurate and precise high speed board. FAPUD is constructed, based on two main algorithms of the PBEC (Path Based Equivalent Circuit) model and the network synthesis method. The PBEC model exploits simple arithmetic expressions of the lumped 1-D circuit model from the electrical parameters of a 2-D power distribution network. The circuit level design based on PBEC is carried with the proposed regional approach. The circuit level design directly calculates and determines the size of on-chip decoupling capacitors, the size and the location of off-chip decoupling capacitors, and the effective inductances of the package power bus. As a design output, a lumped circuit model and a pre-layout of the power bus including a whole decoupling capacitors are obtained after processing FAPUD. In the tuning procedure, the board re-optimization considering simultaneous switching noise (SSN) added by I/O switching can be carried out because the I/O switching effect on a power supply noise can be estimated over the operation frequency range with the lumped circuit model. Furthermore, if a design changes or needs to be tuned, FAPUD can modify design by replacing decoupling capacitors without consuming other design resources. Finally, FAPUD is accurate compared with conventional PEEC-based design tools, and its design time is 10 times faster than that of conventional PEEC-based design tools.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.445-445
• /
• 2000

This paper proposes the MIMO indirect adaptive fuzzy controller to control the two-link manipulators. The input-output linearization technique, equivalent control input plus integral term, augmented error model and recursive least square adaptive law are used fer the controller. The linear type of fuzzifier-defuzzifier fuzzy logic system used for nonlinear function makes easy to farm the error model and able to follow the adaptive system approach. Such that control approach, the control system is not required joint speed and accerelation measurement and easy to implement and tune. The simulation results showed that the proposed controller has good control performance, stability, very small tracking error, decoupling, fast convergence, robust to parameter variation and load.