• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.31 no.1
• /
• pp.13-27
• /
• 2013

This study investigated flora and vascular plants area around Buyongdae where include optimum view point Okyeonjeongsa and Gyeomamjeongsa in Hahoe Village, Andong. Based on the findings, the aim of results was attempted to suggest the management plan of the vegetation area around Buyongdae which designated UNESCO World cultural heritage and folk village in Korea. The results of the study is as the following. All flora of this site, Buyongdae in Andong, were 301 taxa; 89 families, 217 genera, 251 species, 1 subspecies, 38 varieties and 11 forms. Vegetation of each of areas in site was classified Pinus densiflora as representative forest around Buyongdae, Quercus variabilis forest around Gyeomamjjeongsa and Koelreuteria paniculata forest in river cliff of Buyongdae. The 14 taxa(Polygala tenuifolia, Koelreuteria paniculata, and others) as the rare plants and the 7 taxa(Weigela subsessilis, and others) as endemic species were recorded in the surveyed site among the whole flora. The specific plants which is categorized to degree by the Ministry of Environment appeared as 32 taxa; degree IV was 4 species; Polygala tenuifolia, etc. and degree III was 10 species; Hypodematium glandulosopilosum, Pyrrosia petiolosa, etc. and degree I was 13 species; Hemiptelea davidii, Zizyphus jujuba var. jujuba, etc. Also, the 11 taxa were recorded in limestone area as the chamaephyte; Hypodematium glandulosopilosum, Celtis koraiensis, Siphonostegia chinensis, Artemisia gmelini, and others. The naturalized plants recorded as 25 taxa; Viola arvensis, Erechtites hieracifolia, etc. and invasion of Sicyos angulatus which is ecosystem disturbing plants. The naturalization rate(NR) was 8.3% and the urbanization index(UI) was 7.8% by field survey. For recovery of indigenous to traditional vegetation landscape in Buyongdae, Pinus rigida of upper-growth and Alnus sibirica of middle-growth need thinning. In addition, the site demands both sustainable management through long-term monitering and gradual elimination method for the naturalized plants including Sicyos angulatus where found in Kyumamjeongsa. Particularly, intentional planting for decoration and cultivation around Hwachunseowon, Helianthus tuberosus must be substitute with the native plants. Meanwhile, Polygala tenuifolia is potently demanded preventing habitate, confirming additional habitate, seed securing and preservation of gene resource internally or externally. Koelreuteria paniculata; denoting feature of river cliff, including Hypodematium glandulosopilosum, Siphonostegia chinensis, Zizyphus jujuba var. jujuba, Pyrrosia petiolosa, and Celtis koraiensis, also need an assertive preservation. Futhermore, Wisteria floribunda for. floribunda, located around Galmo rock to Chunggil course, remained by colonizing form, need preservation and observation for a while. Beside that, the information boards are required to educate visiting user about safe regulations on the narrow way in rock hill.

• Journal of Science of Art and Design
• /
• v.5
• /
• pp.87-129
• /
• 2003

The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

• Journal of the Korean Society of Costume
• /
• v.36
• /
• pp.183-203
• /
• 1998

The wave of Avant-garde swept away all in the unique social background so called 'October Revolution' and the early 1900 Russian society which was able to absorb and accept anything. The Russian avant-garde has been affected by the Cubism and the Futurism those had peculiarly appeared in the early twentieth century, spreaded out to three spheres: the Suprematism, the Rayonism and the Constructivism. The Russian Constructivism has appeared in this background, concretely and ideally ex-pressed the ideology of the revolution into the artistic form and made an huge influence to the whole Russian society. The Constructivist like Tatlin, naum Gabo, Pevaner, Rodchenko, Stepanova, Popova and Exter gave great effect on the Soviet Constructive fashion design in 1920's after the Revolution. The Soviet costume in 1920s hold in common the characteristicss of the Constructive graphic as it is, geometrical and abstractive form, energetic and motility. In fashion design, these graphic qualities have been showed as the application of geometrical form and architectural image, physical distortion and transformation. And in textile design, the simple, dynamical presentation has been appeared. We can classify the Soviet costume at this time into three occasions. The first term is from late 1910 th mid 1920, and it is altered from folk costume design to modern one. With Lamanova as the first on the list, using the folk mitif, the Constructive expression of simple form has been gradually revealed in design. Designers like Makarova, Pribylskaia and Mukhina produced the plane, simple chemise style with the decoration of the Russian traditional motif. From early to late 1920 is the second term, and it is at the pick of the most active processing of the Constructive design. Not only at the costume in daily life but also at the theatrical costume and textile, the con-structive design has been represented all avail-able fields. Many Constructivists including Stepanova, Popova, Exter and Rodchenko took part in the textile design and costume design so as to evlvo their aesthetic concept. The third term is from late 1920 to early 1930. The socialistic realism has dominated over the whole culture and art, the revolutionary dynamic motif has been presented also in textile design. The formative features of Soviet Constructive fashion design are; silhouette, from, motif, color and fabric. The first, the silhouette : a straight rectangular silhouetted has been expressed through the whole period and a volumed one with distorted human body shape has introduced in the theatrical costume design. The second, the form: many lengthened rectangular forms have been made at beginnings, but to the middle period, geometrical, architectural forms have been more showed and there are energy and movement in design. At the last period, only a partial feature-division has been seen. The third, the motif; no pattern or ethnic motif has been partly used at beginnings, a figure like circle, tri-angle has gradually appeared in textile design. At latter period, a real-existent motif like an airplane has been represented with graphing and simplicity. The fourth, the color ; because of insufficient dyeing, neutral color like black or grey color has been mainly covered, but after middle term, a primary color or pastel tone has been seen, contrast of the fabric; without much development of textile industry after the Revolution, thick and durable fabrics have been the main stream, but as time had going to the last period, fabrics such as linen, cotton, velvet and silk have been varously choesn. At the theatrical costume, new materials like plastics and metals that were able to accentuate the form. The pursuit of popularity, simplicity and functionalism that the basic concept of Constructive fashion is one of the "beauty" which has been searching in modern fashion. And now we can appreciate how innovative and epochal this Soviet Constructive fashion movement was.ement was.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.945-951
• /
• 1999

A simple and practical method for the determination of gardenia yellow in foods was developed. In this method, analysis of gardenia yellow in food products has been carried out by the detection of crocetin and/or geniposide as indicator compounds. As a new analytical method for gardenia yellow, we adopted crocetin, which is produced from colored components of gardenia yellow by alkaline hydrolysis, as an indicator compound. The analysis of gardenia yellow was performed by reverse phase high performance liquid chromatography using a Capcell pak $C_{18}$ column at wave length 240 nm (geniposide) and 435 nm (crocetin). The recovery rates of geniposide and crocetin were found to be 93.4% and 87.8% for Dan Mu Ji, 90.2% and 85.9% for milk, 92.8% and 86.5% for snack, respectively. With this method, the range of crocetin and geniposide contents $({\mu}g/g)$ were as follows: $ND{\sim}1.7$ and $ND{\sim}14.1$ for Dan Mu Ji, $ND{\sim}0.2$ and $ND{\sim}13.6$ for milk, $ND{\sim}1.6$ and $ND{\sim}0.9$ for snack, respectively. The detection limits of crocetin and geniposide were 0.07 ${\mu}g/g$ and 0.05 ${\mu}g/g$, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.1
• /
• pp.3-11
• /
• 1989

This study was carried out to investigate the physical and mechanical properties. durability of adhesive bond and paint film for the basic data which were required to determine the suitability as a raw material for furniture the laminated veneer lumber (LVL) with pitch pine (Pinus rigida Mill). The results obtained were as follows; 1) The proper pressing time for making the LVL was over 45 second per milimeter of LVL thickness. 2) The bending strength of the LVL was lower than that of the solid wood but the compressive strength of the LVL was similar to that of the solid wood. The strength increased with the decrease of veneer thickness. 3) The impact bending absorbed energy of the LVL was 0 to 0.3 kg.m/$cm^2$ in the direction of parallel to the grain. The energy of the LVL was lower than that of the solid wood (0.68 kg.m/$cm^2$). 4) In warm water soaking and cold-dry tests, delamination of adhered layers surface crack, swelling, and color change were not found when the hot pressing time was over 45 second per milimeter of LVL thickness. As a result of soak under vacuum test shrinkage in the direction of parallel to the grain was about -1.0 percent and. was about 3.0 percent in the direction of the perpendicular to the grain. 6) The film cacks on the LVL's surface after the wet and cold-dry test were not found at all. 7) In the use of the LVL for interior decoration it was considered that the surface of the LVL be overlaid crossly with fancy veneers of birch and paulownia, etc. This cross overlayirg methods have resulted in few cracks on the fancy veneer.

• 대한공업교육학회지
• /
• v.34 no.1
• /
• pp.87-112
• /
• 2009

The aim of this research is to suggest the model of reconstruction and remodelling of S high school of broadcast for converting into a specialized one in the section of broadcast industry. The method of reconstruction of the laboratories by each department is as follows. First, the names of laboratories, ground plans, and perspective drawings are designed according to the principle of constructionism. Second, each department is recommended to install 7 laboratories. For the department of broadcasting facilities, a laboratory of processing broadcasting machines, a laboratory of broadcasting machines, and a laboratory of screen picture machines are needed. For the department of broadcasting, electricity, and communication, a laboratory of image and sound edition, a laboratory of broadcasting and communication, a laboratory of broadcasting system, and a laboratory of stage illumination. For the department of broadcasting stage construction, a laboratory of broadcasting stage building, a laboratory of broadcasting stage design, a laboratory of broadcasting stage decoration and etc. Third, an office room is designed by department in the form of seminar room and places for practice is formed by department to be a laboratory. Fourth, a room for industrial-educational cooperation is installed by department, by which education of industrial-educational cooperation is carried out harmoniously. And one example of a remodeled laboratory by one department is shown with laboratory name, ground plan, perspective drawing, and running method. Especially employment of teachers working both school and business, professional club which is concerned with broadcasting technique, and attraction of enterprise in school is suggested as important elements to manage broadcasting laboratories efficiently. Finally, it is desirable for us to attract private capital, that is, Build-Transfer-Lease(BTL) because much budget is required for purchasing the broadcasting equipments and remodelling the laboratories to succeed as specialized high school on broadcasting section.

• Journal of the Korean Society of Costume
• /
• v.33
• /
• pp.117-142
• /
• 1997

This study is on perfume case that is one of a great number of ornaments which was designed by out ancestors. We had developed the tradition and the history of perfume case bag fan-weight etc. These have the same function as the present perfume. case. There were basket-shaped perfume cases which were the smellest one among the personal girdle ornaments in the silla era. The various patterned perfume case were made of gold metal coral platinum or green jadeite etc. In the single-crop trinkets a embroidered perfume bag with the gold and silver thread whose forms perfectly match their functions appeared during the Yi Dynasty. There was also a perfume bag which was one of the daily necessities. A precious "jul perfume" was carried by noble women. A fan-weight perfume bag was attached to the fan to emphasize the intrinsic beauty of utility and function. It is necessary to know the function of prefume case. As perfume case is weared on the clothes it was given more decorative effects as well as the function of medicinal amulet with a sweet smell. Therefore it is very important for us to study perfume case that has various function as an ornament. So The purpose of this study is to investigate the practical and decorative side of perfume case with the general examines of perfume finding how to practice use through our life. The results were as follows; 1. The first use of perfume is perfume through smoke which is for ceremony of religion It removes human body odor by degrees and spreads a sweet odor. Also the materials for making perfume of early age is aromatic plants which will be used flour-made flowers stems. As the materials for making perfume use is increasing today we can invent alcohol perfume today 2. Our country the custom of perfume-used is wide. Among them men's perfume-used was very special phenomenon. For example men were wearing perfume bag in the Silla era. Because perfume represented wealth and noble in those days. They shew off social position personality through perfume-used. 3. One of early religion ceremony article there was the perfume. And perfume case was means for containing perfume. Gradually the perfume case was used widly as increasing needs of perfume in human life. 4. In the middle period of 'Koryo' Dynasty perfume cases had a close relationship with clothes but after Mongolian has been attacked 'Koryo' there were changes in wearing clothes therefore the position of perfume cases were transfered to coat string that was the origin of decoration style that they began. That is to say the perfume case has been influenced the position of perfume case shapes with changing of fashion. 5. The perfume case has been made manifest various function as an ornament. In the practical side First medical-perfume in perfume case has been played an important role in first-aid medicine in critical condition. Second it was amulet for self protection. That is the shape pattern color materials perfume of the perfume case was represented the amuletive nature. Third it was used as substitute article of perfume. Modern women use liquid-perfume as our ancestors used perfume case bag or jul perfume As started above. Also In the decorative side the perfume case has a beautiful formative arts by itself as well as a close relationship with clothes. That well as a close relationship with clothes. That is when the perfume case is worn on the clothes costume is showed aesthetices. That is the materials shapes color pattern of the perfume case we can see the visual beauty also the materials colors embroidered pattern knots tassel that are used the perfume case are increased the decorative beauty of costume. Sixth the symbol in pattern of the pattern case is shown ancetor's wealth and rank health longevity immortality many-born-boy in those days. Today the perfume case is not used with changing of costume by degrees, Accordingly I hope that the result of this study is an influened in devlopment of the perfume case design with matching the modern fashion.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.62-79
• /
• 2020

The rock-carved seated Avalokiteśvara statue at Ganghwa Bomunsa Temple is a giant rock-carved Buddhist statue that was built in 1928 during the Japanese colonial era. Although it is a year-recorded Buddhist statue that occupies a prominent place in modern Korean Buddhist sculpture history, it has not been the subject of in-depth discussion due to weak research on modern Buddhist sculptures. In this study, to examine the various significant aspects of the rock-carved Seated Avalokiteśvara statue at Bomunsa Temple as a modern Buddhist sculpture, I have managed to determine its construction year, artificers, and patrons by deciphering the inscription around the rock-carved statue; in addition I have researched the effects of the rock shapes and landforms on the formation of the Buddhist statue by comparing and analyzing the points of view of both artificers and worshipers. I have also identified the specific circumstances of the time of construction from interviews with the descendants of artificers. A monk from Geumgangsan Mountain, Lee Hwaeung, took the role of sponsor and chief painter to construct the rock-carved seated Avalokiteśvara statue at Bomunsa temple. In the beginning of its construction in 1928, more than 100 donators jointly sponsored the construction of the statue. Gansong Jeon Hyoungphil sponsored alone at the time of the place of worship's expansion in 1938. Bomunsa Temple has been regarded as one of the top-three sacred places of Avalokiteśvara Bodhisattva together with Naksansa Temple in Yang Yang and Boriam in Nam Hae, due to the construction of the rock-carved statue. It took about three months to construct the statue. Lee Hwaeung drew a rough sketch and then Un Songhag and five masons from Ganghwa Island took part in the carving process. We can observe the line drawing technique around the rock-carved statue because the statue was carved based on the rough sketch of the monk painter. The aspect of Lee Hwaeung as a painter is revealed; therefore, we can identify the clue of painting pattern leading to Seogongchulyou- Hwaunghyoungjin- Ilonghyegag. The rock-carved seated Avalokiteśvara statue at Bomunsa Temple is a typical Avalokiteśvara that wears a jeweled crown and holds Kundica. It makes a strong impression as it has a big square-shaped face and a short neck and is unsophisticated in general. The artificers solved the issue of visual distortion of the rock-carved statue caused by carving on a 10-meter high and 40-degree sloping rock by controlling motion to its maximum, omitting detailed expression by emphasizing symmetry, and adjusting the head-to-body proportion to be almost one-to-one. In this study, especially, I presume the unified form of sacred sculptures and Buddhist altars, without making a Buddhist altar like the rock-carved seated Avalokiteśvara statue at Bomunsa Temple, to be a key characteristic of modern Buddhist sculptures. Furthermore, I make newly clear that the six letters of Sanskrit carved on nimbus, which had been interpreted as a Six-Syllable Mantra, are a combination with Jeongbeopgye and Sabang Mantras. In addition, three iron rings driven on eaves rock were used as a reference point, and after construction they were used as a decoration for the Bodhisattva with hanging wind chimes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.690-697
• /
• 2006

This study has been carried out to estimate mean concentration and the daily intake of 2 artificial sweeteners (aspartame and sucralose) by analyzing food samples. Total number of samples was 755 and the number of samples detected for sweeteners was 33 (detection rate was 4.4%). Contribution rate to total estimated daily intake (%) of artificial sweeteners in food categories was high in candy for aspartame and sucralose. Total Estimated Daily Intakes $({\Sigma}EDI)$ for different age groups were high in $13{\sim}19$ years old for aspartame and $7{\sim}12$ years old for sucralose. Total estimated daily intakes $({\Sigma}EDI)$ of men and women were 5.10 mg/person/day and 4.88 mg/person/day, respectively. Total estimated daily intakes $({\Sigma}EDI)$ of artificial sweeteners were shown as follows; 3.75 mg/person/day for aspartame and 1.27 mg/person/day for sucralose, respectively and assuming a body weight of 55 kg. These values were ranged from $0.15{\sim}0.17%$ of acceptable daily intake (ADI) evaluated by FAO/WHO and $1.0{\sim}21.4%$ of theoretical maximum daily intake (TMDI), and therefore, judged to be safe.

• Journal of Korean Society of Forest Science
• /
• v.10 no.1
• /
• pp.7-16
• /
• 1970

There are 19 species of bamboo in Korea, among which few are of commercial value. The Phyllostachys has wide range of utilization, for sea weed production, industrial production of various bamboo wares, etc. The total export from Chenla-Namdo to some more than ten countries was recorded 204,000,000 won worth in 1969. As civilization develops so does the techniques of bamboo works, and they in turn accelerate the demand for bamboo wood of better quality. In the light of this trend, the author attempted to make bamboo plants to develope a quadragular culm with elaborate design as disired instead of the original round one, with the expectation that it might be widely welcomed by hand workers, interior decorators. Here are some facts found out in this experiment: 1). The greater the diameter of the shoot at the eye level was, the better result was brought, and as shown in Fig. 5 the rate of success was 72% with the shoots of 7.5 cm thick. 2). The shoots of 30 cm in length showed 100% of success, developing into a desired quadrangular culms without fail(See Fig. 6). 3). The intensity of wood fiber increased as time lapsed, without receiving any influence by the weather (See Fig. 7, 8). 4). During the growing, the culm proved to be flexible enough to bend up to 90 degree (See Fig. 9). 5). In an attempt to promote the value of bamboo by decoration, the author tried to impress rectangular indents on the culm. The indention using a qudangular board 1cm smaller in width than the shoot diameter gave 100% success (See Fig. 10). 6). Design experiment was also successful both in coloration and impressing and the resulting designs delicately depended on the kinds of chemicals used and their combination (Table 2) (See Fig. 12, 13, 14). With the above mentioned findings, the author concludes that the mass production of quadrangular bamboo culm is quite a promissing as an new industry to develope bamboo works to a more valuable one. This research was carried out with the research fund provided by the Ministry of Education in 1969.