• Title/Summary/Keyword: decay characteristics

Search Result 518, Processing Time 0.026 seconds

원형수직 충돌 수분류에 의한 고온강판의 냉각특성 연구 (Cooling Characteristics of a Hot Steel Plate by a Circular Impinging Liquid Jet)

  • 오승묵;이상준
    • 대한기계학회논문집
    • /
    • 제16권6호
    • /
    • pp.1150-1155
    • /
    • 1992
  • 본 연구에서는 제철소 열연공정의 냉각효율 개선을 위한 기초연구로 수행되었 다. 전열면의 초기온도가 900.deg. C이상일 때 층류 냉각방식에 의한 고온강판의 냉각특 성에 영향을 주는 모든 인자를 엄밀히 고려하는 것은 매우 어려운 일이다.따라서 본 연구에서는 노즐과 고온면 사이 거리(L), 유량(Q), 냉각 초기온도 등을 실제 작업 조건에 가깝게 변화시켜 가면서 수냉반경의 변화를 중심으로 전열면의 냉각 특성을 해 석하였다.

고해상도 위성자료를 활용한 마른 잎 탐지 (Detection of Decay Leaf Using High-Resolution Satellite Data)

  • 심수영;진동현;성노훈;이경상;서민지;최성원;정대성;한경수
    • 대한원격탐사학회지
    • /
    • 제36권3호
    • /
    • pp.401-410
    • /
    • 2020
  • 최근 지구 온난화의 영향으로 변화하는 한반도 식물계절에 대한 연구가 많이 이루어지고 있다. 그러나 지리적인 특성상 봄철 식물계절에 비해 실측이 어려운 가을철 식물계절의 연구는 미비한 실정이다. 이에 본 연구에서는 대표적인 가을철 식물계절인 단풍과 낙엽 등을 '마른 잎'으로 정의하고 Landsat-8 위성영상을 기반으로 마른 잎 탐지를 수행하였다. NDVI를 이용하여 마른 잎의 1차 경계 값을 산출하고, 건강한 잎과의 분광특성 차이 및 NDWI를 이용하여 마른 잎의 2차 경계 값을 산출하였다. 본 연구의 마른 잎 탐지 알고리즘의 정확도 검증을 위해 POD, FAR 값을 이용하였으며, 검증 결과 POD는 98.619, FAR은 1.203으로 높은 정확성을 보였다.

칠레산 수입포도 '레드글로브' 품종에 발생한 부패병 병원균의 동정 (Identification of Pathogens Causing Grape Rot on 'Red Glove' Variety Imported from Chile)

  • 송민지;이혁인;예미지;김대호;홍승범;차재순
    • 식물병연구
    • /
    • 제18권3호
    • /
    • pp.217-224
    • /
    • 2012
  • 수확 후 부패는 큰 경제적 손실과 포도의 품질을 낮추는 요인이다. 또한 이는 포도 수출의 중요한 제한 요인 중 하나이다. 본 연구에서는 칠레로부터 수입한 '레드글러브' 품종의 부패병과 원인 병원균을 동정하였다. 포도 수입항 근처의 저장창고로부터 부패병이 발생한 포도를 수집하였다. 수입포도 '레드글러브' 품종에서 melting decay, 잿빛곰팡이병, 푸른곰팡이병의 3가지 부패병이 관찰되었다. 전형적인 melting deay로부터 분리한 세균은 16S rDNA의 염기서열과 지방산 프로필을 기초로 Gluconobacter cerinus로 동정하였다. 건전한 포도에 접종에 의해 분리균은 melting decay의 특징인 포도 알 표피의 열과와 괴저를 유도하였다. 잿빛곰팡이병과 푸른곰팡이병 병징을 보이는 포도로부터 Botrytis cinerea와 Penicillium expansum을 분리하였다. 이 2가지 균류는 형태적 특징과 beta-tubulin 유전자의 염기서열을 기초로 동정하였다. 이들은 한국에서 가장 많이 생산되는 '캠벨얼리' 품종에서 강한 병원성을 보여 주었다.

주성분 분석을 이용한 홍삼의 내부품질과 자기공명특성 분석 (Analysis of Internal Quality and Magnetic Resonance Characteristics of Red Ginseng Using PCA)

  • 김성민;김철수
    • Journal of Biosystems Engineering
    • /
    • 제28권3호
    • /
    • pp.261-268
    • /
    • 2003
  • Ten MHz pulsed NMR spectrometer was used to measure the magnetic resonance characteristics of Korean red ginseng. The difference in the internal structures of good and bad red ginsengs was examined by their NMR characteristics. Average values of $T_1$ and free induction decay(FID) ratios of under grade Korean red ginseng were the highest among the three groups categorized as normal, medium and under grades Korean red ginseng and average values of $T_2$ and $T_2$$^{*}$ of them were the lowest among the three groups. Principal component analysis(PCA) was used to observe the contribution of measured NMR values to the grade of Korean red ginseng. The measured $T_1$, $T_2$, $T_2$$^{*}$ and FID ratio of 79 Korean red ginsengs classified as normal grade, medium grade and under grade were examined using PCA analysis. Cumulative variance of PC1 through PC3 occupied more than 90% of total variance at first and second NMR measurement. Plots of PC scores for the most important PCs showed that normal red ginseng samples were distributed around the left region of PC1 axis and most of the undergrade red ginseng samples were scattered around the right region of PC1 axis.

한국 범종에 대한 음향 및 선호도 분석 (Acoustic Characteristics and Timbre Preferences of Korean Bells)

  • 박상하;이민구;한나라;성굉모
    • 한국음향학회지
    • /
    • 제30권5호
    • /
    • pp.273-280
    • /
    • 2011
  • 본 논문에서는 전국 각지의 범종 소리를 녹음하고 이를 크기에 따라 두 개의 그룹으로 분류한 후, 두 그룹에 대하여 주관청취 평가를 시행하여 사람들이 어떤 범종 소리를 선호하는지 조사하였다. 또한, 범종 음향 분석을 통해 부분음의 위치, 크기, 맥놀이 주기, 20 dB 감쇠 시간을 분석하였다. 이후, 분석된 음향학적 파라미터와 선호도의 상관관계를 파악함으로써 선호도가 높은 범종과 선호도가 낮은 범종을 구분짓는 음향학적 특징을 알아보았다.

자외선 가속열화에 따른 옥외용 폴리머 절연재료의 표면열화 분석 (Analysis of Surface Degradation on Accelerated UV-treated Polymeric Housing Materials for Outdoor Insulator)

  • 연복희;이상용;허창수;심대섭;조한구
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제50권10호
    • /
    • pp.479-488
    • /
    • 2001
  • The effects of accelerated Ultraviolet (UV) radiation on High temperature vulcanized (HTV), Room temperature vulcanized (RTV) silicone rubber and two types of ethylene propylene diene terpolymer (EPDM) used for composite insulator were inverstigated by hydrophobicity class (HC), surface voltage decay after corona charging, SEM-EDS, FTIR and XPS. The contact angle in two kinds of silicone rubber was scarcely change, but EPDM occurred to the loss of hydrophobicity followed by surface cracking and chalking. The surface voltage decay on UV-treated silicone rubber and EPDM showed a different decay trend with UV treatment. EDS and XPS analysis indicated that the oxygen content increased with UV treatment time in all samples. For silicone rubber, the oxidized groups of inorganic silica-like structure increased with UV treatment time. The oxidized carbon of C=0, O=C-O in EPDM increased. These oxidized surface for each material had different electrostatic characteristics, so deposited charges were expected to have different impacts on their surface hydrophobicity. The degradation mechanism based on our results was discussed.

  • PDF

ICP 장치를 이용한 초전도 자속 흐름 트랜지스터의 링크 제작 (Fabrication of the Superconducting Flux Flow Transistor Using the ICP Etching Method)

  • 강형곤;임연호;임성훈;최효상;한윤봉;한병성
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제50권10호
    • /
    • pp.494-499
    • /
    • 2001
  • The effects of accelerated Ultraviolet (UV) radiation on High temperature vulcanized (HTV), Room temperature vulcanized (RTV) silicone rubber and two types of ethylene propylene diene terpolymer (EPDM) used for composite insulator were investigated by hydrophobicity class (HC), surface voltage decay after corona charging, SEM-ES, FTIR and XPS. The contact angle in two kinds of silicone rubber was scarcely change, but EPDM occurred to the loss of hydrophobicity followed by surface cracking and chalking. The surface voltage decay on UV-treated silicone rubber and EPDM showed a different decay trend with UV treatment. EDS and XPS analysis indicated that the oxygen content increased with UV treatment time in all samples. For silicone rubber, the oxidized groups of inorganic silica-like structure increased with UV treatment time. The oxidized carbon of C=O, O=C-O in EPDM increased. These oxidized surface for each material had different electrostatic characteristics, so deposited charges were expected to have different impacts on their surface hydrophobicity. The degradation mechanism based on our results was discussed.

  • PDF

신축 주택의 톨루엔 발생량 모델을 이용한 건강위해성 평가 (Risk Assessment by Toluene Source Emission Model in Indoor Environments of New Houses)

  • 김영희;양원호;손부순
    • 한국환경보건학회지
    • /
    • 제32권5호
    • /
    • pp.398-403
    • /
    • 2006
  • Indoor air quality can be affected by indoor sources, ventilation, decay and outdoor levels. Understanding the effectiveness of indoor air quality control depends on knowledge of the characteristics of air pollutants in indoor air, especially their quantities and persistence, and the relevance of indoor sources to these factors. Toluene within new and established houses has been determined and factors significant to its presence have been identified. A total of 30 selected houses in Seoul, Asan and Daegu areas that were constructed within 4 years and over 4 years of construction were measured the concentration of toluene from July to September in 2004. Toluene emission decay of double-exponential model exhibited good fit of $Y=276.37e^{-1.21x}(R^{2}=0.34,\;P=0.06)$ for 2 years and then $Y=51.54e^{-0.11x}(R^{2}=0.40,\;P=0.0)$ from 23 years in new houses. In case of living in new houses, noncarcinogenic health effects of exposure to toluene was 1.38 of hazard quotient (HQ) comparing to toluene reference dose of 0.13 mg/kg-day.

CaO와 $TiO_2$분말로 합성된 $CaTiO_3$:Pr형광체의 발광구조 해석과 음극선 발광특성 (The Luminescent Mechnism and Cathodoluminescence of $CaTiO_3$:Pr Synthesized with CaO and $TiO_2$ Powders)

  • 박용규;한정인;곽민기;이인규;김대현
    • 한국전기전자재료학회논문지
    • /
    • 제11권8호
    • /
    • pp.646-651
    • /
    • 1998
  • In this present study, the luminescence characteristics and mechanism of energy $CaTiO_3$:Pr phosphor were studied using disk specimens sintered at various temperatures and envirenment. A single-phase $CaTiO_3$:Pr was synthesized by sintering above 140$0^{\circ}C$ and its crystal structure was found to be perovskite orthorhombic. A dominant peak around 360 nm and a broad peak around 395 nm were observed in the PLE(Photoluminescence Excitation) spectrum of $CaTiO_3$:Pr with fixed emission wavelength at 612 nm, the decay time of 360 nm excitation was found to be longer than that of 395 nm excitation. From this result, it is assumed that the free carrier excited to 360 nm is transferred to 395 nm energy level. Therefore, the decrease in 395 nm intensity observed in CaTiO$_3$:Pr specimens sintered in Ar gas environment induced shorter decay time and improved CL luminescence.

  • PDF

포도 품종간 송이 부위별 생리적 특성과 수확 후 냉각과 유통성 관계 (Physiological properties of grape cluster portions between cultivars and the effect of postharvest cooling on the marketability)

  • 민정호;임병선;최윤수;이경민;김달우;황용수
    • 농업과학연구
    • /
    • 제39권1호
    • /
    • pp.1-8
    • /
    • 2012
  • Rapid loss of grape berry quality after harvest occurs due to poor postharvest management. Understanding physiological properties between cultivars is required to develop practical technologies to control fast quality deterioration of tables grapes. Physiological characteristics of whole cluster, rachis and berries were examined to find their effects on postharvest behaviour of table grapes. 'Tamnara' showed high respiration rate and browning of rachis compared to 'Campbell Early'. Weight loss of rachis of 'Cheongsoo' was highest of three cultivars. Berry decay in 'Cheongsoo' begins at the connection portion between peduncle and berry, and berry decay of 'Cheongsoo' was the most severe among three cultivars. Precooling at $0^{\circ}C$ showed better results than cooling at $10^{\circ}C$ regardless of cultivars but cooling effect decreased when simulated marketing period increased up to 10 days. Plastic film wrapping was effective on reducing decay in general but not at higher marketing temperature. For successful commercialization of newly developed grapes, the inhibition technology of rachis browning in 'Tamnara' is required and decay control in 'Cheongsoo' through establishment of cold chain system is recommended.