• Journal of Radiation Protection and Research
• /
• 제21권1호
• /
• pp.27-39
• /
• 1996

DUPIC핵연료주기로 인해 변화되는 경수로 사용 후 핵연료 물질의 핵종별 농도, 방사능, 붕괴열, 위해지수 및 방사선원항등을 시간의 함수로 그 변화특성을 분석하고, 각 인자별로 크게 영향을 미치는 주요핵종의 거동을 물질농도 측면에서 추적 분석평가하였다. 방사성물질 농도에 있어서 연소도 19,000 MWD/MTU의 사용 후 DUPIC핵연료에 존재하는 악티나이드 양은 연소도 35,000 MWD/MTU의 경수로 사용후 핵연료에 비해 약 2% 감소한 반면 핵분열생성물의 양은 약 20% 증가된 것으로 나타났다. 그리고 사용 후 DUPIC핵연료의 방사능 및 붕괴열은 일반적인 사용후핵연료 특성과는 달리, 방사성물질 농도 변화와 비례하지 않는 것으로 나타났다. 사용후 DUPIC핵연료가 갖는 감마 스펙트럼을 경수로핵연료의 경우와 비교해 볼 때, 전체적인 특징은 사용후 DUPIC핵연료의 경우가 $0.01{\sim}0.575MeV$의 낮은 에너지 범위에서는 경수로핵연료 보다 약 $40{\sim}50%$ 낮은 감마선 세기를 보여주고 있으나, 3.5 MeV이상의 높은 에너지 범위에서는 사용후 DUPIC핵연료의 감마선 세기가 휭씬 크게 나타났다. 중성자 선원항은 모두 악티나이드 물질의$({\alpha},\;n)$ 반응 및 자발핵분열에 의해 결정되고 있고, 특히 Cm-244의 자발 핵분열에 의한 중성자선원이 지배적인 것으로 나타났다. 이런 이유 때문에 Cm-244의 농도가 약 3.3배 큰 사용후 DUPIC핵연료의 중성자 선원이 경수로핵연료보다 4배 이상 크게 나타났다.

• 한국해양공학회지
• /
• 제10권3호
• /
• pp.117-124
• /
• 1996

A fluidized bed combustion chamber is widely used to incinerate waste material. The most important factor designing the incinerator is the flow characteristics in a fluidized bed, because combustion efficiency is influenced by the flow characteristics. This paper has invesitigated the flow characteristics of bubbles in fluidized bed by means of meassuring a pressure fluctuation in the fluidized bed. A pressure probe system has used to measure the pressure. The data concerned with bubble rising velocity, bubble size, distribution of bubbles and frequency of bubble generation or decay are obtained to find the flow characteristics of bubbles in the fluidized bed. The result obtained from this experimental study can be used to design the fuel feeding system of fluidized bed combustion type incinerator. And it is possible to predict the mixing of waste material and fluidizing material.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권2호
• /
• pp.82-86
• /
• 2000

Humidity sensors using $TiO_2$ thin films were fabricated on the multi-electrode device by Sol-Gel method and their wettability, surface potential decays and humidity sensing characteristics were investigated. Contact angle of thin films was $28^{\cic}\;at\; 400^{\circ}C$ and surface potential decayed rapidly at $400^{\circ}C$. The specimen showed best humidity sensing characteristics at $400^{\circ}C$. From the results, they were confirmed that humidity sensing characteristics of thin films have connection with contact angle and surface potential decays.

• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.52-59
• /
• 2012

Among many factors to be considered for higher safety level requirements, the hull stability in intact and damaged conditions in seaways is of utmost importance. Since the assessment of a damaged ship is complicated due to the highly non-linear behavior, it is widely acknowledged that computational fluid dynamics (CFD) methods are one of the most feasible approaches. Although many research activities are being reported on the damaged ship stability recently, most of them are not designed for validation of CFD studies. In this study, well-designed model tests were performed to build a CFD validation database, which is essential in developing better CFD methods for the damage stability assessment. The geometry of the damaged compartment and test conditions were determined based on preliminary CFD simulations. Free roll decay tests in calm water with both intact and damaged ships were performed and the roll motion characteristics were compared. The damaged ship showed a larger roll damping coefficient and more rapid decrease of roll amplitude than the intact ship. The primary reason of these efforts can be explained by the movement of the flooded water.

• 한국재료학회지
• /
• 제20권7호
• /
• pp.364-369
• /
• 2010

A $SrAl_2O_4:Eu^{2+},Dy^{3+}$ phosphor powder with stuffed tridymite structure was synthesized by glycine-nitrate combustion method. The luminescence, formation process and microstructure of the phosphor powder were investigated by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence spectroscopy (PL). The XRD patterns show that the as-synthesized $SrAl_2O_4:Eu^{2+},Dy^{3+}$ phosphor was an amorphous phase. However, a crystalline $SrAl_2O_4 $ phase was formed by calcining at $1200^{\circ}C$ for 4h. From the SEM analysis, also, it was found that the as-synthesized $SrAl_2O_4:Eu^{2+},Dy^{3+}$ phosphor was in irregular porous particles of about 50 ${\mu}m$, while the calcined phosphor was aggregated in spherical particles with radius of about 0.5 ${\mu}m$. The emission spectrum of as-synthesized $SrAl_2O_4:Eu^{2+},Dy^{3+}$ phosphor did not appear, due to the amorphous phase. However, the emission spectrum of the calcined phosphor was observed at 520 nm (2.384eV); it showed green emission peaking, in the range of 450~650 nm. The excitation spectrum of the $SrAl_2O_4:Eu^{2+},Dy^{3+}$ phosphor exhibits a maximum peak intensity at 360 nm (3.44eV) in the range of 250~480 nm. After the removal of the pulse Xe-lamp excitation (360 nm), also, the decay time for the emission spectrum was very slow, which shows the excellent longphosphorescent property of the phosphor, although the decay time decreased exponentially.

• 한국해양공학회지
• /
• 제32권1호
• /
• pp.1-8
• /
• 2018

In order to analyze the response of the offshore structure numerically, the linear potential theory is generally applied for simplicity, and only the radiation damping is considered among various damping forces. Therefore, the results of a numerical simulation can be different from the motion of the structure in a real environment. To reduce the differences between the simulation results and experimental results, the viscous damping, which affects the motion of the structure, is also taken into account. The appropriate damping model is essential for the numerical simulation in order to obtain precise responses of the offshore structure. In this study, various damping models such as linear or quadratic damping and the nonlinear drag force from numerous slender bodies were used to simulate the free decay motion of the platform, and its characteristics were confirmed. The optimized damping model was found by comparing the simulation results to the experimental results. The hydrodynamic forces and wave exciting forces of the structure were obtained using WAMIT, and the free decay test was simulated using OrcaFlex. A free decay test of the scale model was performed by KRISO.

• 상하수도학회지
• /
• 제28권1호
• /
• pp.91-101
• /
• 2014

Three water treatment plants(WTPs) in Jeju island whose source water have different characteristics from those of the mainland of Korea were investigated. Coefficients of bulk water decay($k_b$) of free chlorine at $5^{\circ}C$ for ES, GJ, NW WTPs were $-0.003hr^{-1}$, $-0.002hr^{-1}$ and $-0.001hr^{-1}$ respectively based on bottle tests. To simulate the free chlorine variations in the distribution system using EPANET, ES WTP was chosen. Free chlorine concentrations of several sites were less than the drinking water quality standards(i.e., 0.1 mg/L); E5(0.03 mg/L), E6(0.02 mg/L), W21(0.02 mg/L) and W25(0.03 mg/L). To maintain more than 0.1 mg/L of free chlorine in the distribution system, at least 1.9 mg/L of chlorine was needed at the WTP, which suggested rechlorination was needed to supply palatable tap water to customers. Two sites, one that diverged into E5 and E6 in the east-line and another located before E21 in the west-line were selected for the appropriate rechlorination locations. The recommended rechlorination dosages were 0.42 mg/L for the east and 0.27 mg/L for the west. The simulated results indicated that the free chlorine could be reduced to 0.4 mg/L at the WTP with rechlorination, and taps with excessive free chlorine could be more stabilized(i.e., 0.1~0.4 mg/L).

• 한국생태학회:학술대회논문집
• /
• 한국생태학회 2002년도 VIII 세계생태학대회
• /
• pp.127-131
• /
• 2002

In order to elucidate the characteristics of standing crop biomass, production and nutrient content of dead bole in mature ecosystem, we surveyed the dynamics of decaying bole of old-aged deciduous forest in 1993 and 2002 in Kwangnung Experimental Forest Station. In addition, we and estimated annual bole production, water content, wood density and nutrient content and compared the results with that of temperate ecosystem. Total dead wood biomass was estimated to be 5.6ton/ha in 1993 and 17.6ton/ha in 2002. Standing dead tree accounted for a total of 1.1ton/ha in 1993 and 4.8ton/ha in 2002, which was 20% and 27% of the sum of dead bole mass in 1993 and 2002, respectively. Annual production of bole biomass was 1.3 ton/ha/yr. These values fall into the low range of dead wood biomass for the mature temperate ecosystems. Tree species composing standing bole was mainly Quercus and Carpinus trees. This bole species composition resembles alive species composition of this forest. Water content of bole increased as positive logarithmically, but wood density of bole decreased as negative exponentially along with the progress of decay. N, P, Ca and Mg concentrations in decaying boles generally increased with decay, except for K. Annual nutrient input via dead bole is 1.6kg/ha/yr for N, 0.04 kg/ha/yr for P. 1.0 kg/ha/yr for K, 1.7kg/ha/yr for Ca and 0.3 kg/ha/yr for Mg, respectively.

• 한국대기환경학회지
• /
• 제30권2호
• /
• pp.95-109
• /
• 2014

In this study, the concentration of odorants released from albumin (EA) and yolk (EY) portions of boiled egg samples were determined as a function of storage time. The concentrations were measured at storage days of 0, 1, 3, 6, and 9 under room temperature. As such, odorants produced during both fresh and decay conditions were measured through time. A total of 19 compounds were selected as the main target odorants along with 12 reference compounds. GC-MS (for VOC) and GC-PFPD system (for sulfur gases) equipped with thermal desorption (TD) system were employed for odorant analysis in this work. The initial concentrations measured from the chamber system were converted into flux terms ($ng{\cdot}g^{-1}{\cdot}min^{-1}$). The EA showed the highest concentration of $H_2S$ (234 $ng{\cdot}g^{-1}{\cdot}min^{-1}$) at EA-0, and the concentrations of AT (Acetone) was also seen clearly in the range of 11.7 (EA-0) to 58.6 $ng{\cdot}g^{-1}{\cdot}min^{-1}$ (EA-9). The EY showed similar patterns. EtAl (Ethyl alcohol) increased 9.47 (EA-1) to 96.7 $ng{\cdot}g^{-1}{\cdot}min^{-1}$ (EA-9) in EA samples. Ketone, alcohol, sulfur groups generally exhibited high concentrations compared to other odorants. These data were also compared in relation to olfactometry related dilution-to-threshold (D/T) ratio by air dilution sensory (ADS) test and sum of odor intensity (SOI).

• 한국식품과학회지
• /
• 제35권6호
• /
• pp.1110-1116
• /
• 2003

신선 편의가공 양파제품의 적정 포장방법을 탐색하고자 polyolefin계 유연 필름(LDPE, PP)을 이용한 수동 MAP, 20% $O_2/10%\;CO_2/70%\;N_2$ 혼합기체 또는 에틸렌 흡수제를 첨가한 능동 MAP, LDPE 필름으로 감압 포장한 MVP 등의 적용 가능성을 조사하였다. 박피 양파의 포장방법을 달리하여 $10^{\circ}C$에서 28일간 저장하면서 이화학적, 미생물, 관능적 품질변화를 측정하여 개별 품질인자에 대한 포장처리 효과를 검토하였다. 전체적으로 포장방법에 따른 저장중 박피 양파의 표면색, 중량 감소, 미생물 증식은 차이를 분명하게 구분하기 어려웠으나, 외관품질과 부패율 측면에서는 일정한 차이를 식별할 수 있었다. 결과적으로 기체투과성 LDPE 필름에 일정수준의 진공을 적용하여 밀봉 포장한 MVP가 다른 포장구에 비해 상대적으로 박피 양파의 저장품질을 우수하게 유지하는 것으로 확인되었다.