• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.385-393
• /
• 2016

This paper presents the new position estimation method which contains the optical displacement sensor and the dead reckoning based position estimation algorithm for automation of hull cleaning robot. To evaluate feasibility of the proposed position estimation method on the hull cleaning robot, it was applied on the small scale robot model which has an identical drive method with the hull cleaning robot and then a set of the position estimation experiments were performed. The experimental results of the position estimation demonstrate that the estimated results with the optical displacement sensors is more accurate than used rotary encoder method. In addition, it continuously calculated the robot position quite close to the real robot driving path. In a follow-up study, the proposed position estimation method will be complemented and exploited on the actual hull cleaning robot by adding additional sensor modules that correct measurement errors.

• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.133-139
• /
• 2015

This paper surveys vision based autonomous navigation technologies for unmanned systems. Main branches of visual navigation technologies are visual servoing, visual odometry, and visual simultaneous localization and mapping (SLAM). Visual servoing provides velocity input which guides mobile system to desired pose. This input velocity is calculated from feature difference between desired image and acquired image. Visual odometry is the technology that estimates the relative pose between frames of consecutive image. This can improve the accuracy when compared with the exisiting dead-reckoning methods. Visual SLAM aims for constructing map of unknown environment and determining mobile system's location simultaneously, which is essential for operation of unmanned systems in unknown environments. The trend of visual navigation is grasped by examining foreign research cases related to visual navigation technology.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.521-534
• /
• 2021

Purpose: In this paper, we propose an indoor positioning scheme based on pedestrian dead reckoning using inertial measurement unit. By minimizing the effects of the orientation error of smart-phone, the more accurate estimation for the direction, the step count, and the stride can be achieved. Method: The effectiveness and the performance of the proposed scheme is evaluated by experiments, and it is compared with the conventional scheme in the same conditions. Result: The results showed that the positioning error of the proposed scheme was 0.76m, while that of the conventional scheme was 1.84m. Conclusion: Sine most people carry his/her own smart-phone, the proposed scheme can be helpful to recognize where he/she was and was heading when the fast evacuation is needed in indoors.

• Journal of the Korean Society of Safety
• /
• v.36 no.5
• /
• pp.71-78
• /
• 2021

There are regularly planned overhaul periods in thermal power plants, which involve the maintenance of the boiler of the power plants. However, thermal power plants workers are always exposed to risk during overhaul periods owing to the narrow space and significant dust inside the boiler. Therefore, it is essential to develop a safety monitoring system that is suitable for operating in this type of environment. In this study, we developed not only a worker three-dimensional (3D)-location monitoring system that can monitor and record the entry/exit of workers, their 3D-location, and fall accidents but also a method to secure the working environment and operation efficiency. This system comprises of a worker tag, which was equipped with an inertial measurement unit, a barometric pressure sensor, and a Bluetooth low energy (BLE), and the tags were given to each worker. In addition, the location of workers inside the boiler was measured using a pedestrian dead reckoning (PDR) method and BLE beacons. The location data of the workers tag were transmitted to the integrated database (DB) server through a gateway, and to the administrator monitoring system. The performance of the system was demonstrated inside an actual thermal power plant boiler, and the accuracy and reliability of the system were verified through a number of repeated tests. These results provide insights on designing a new system for monitoring enclosed spaces.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.3
• /
• pp.271-280
• /
• 2023

Pedestrian Dead Reckoning (PDR) methods using initial sensors are being studied to provide the location information of smart device users in indoor environments where satellite signals are not available. PDR can continuously estimate the location of a pedestrian regardless of the walking environment, but has the disadvantage of accumulating errors over time. Unlike this, WiFi signal-based wireless positioning technology does not accumulate errors over time, but can provide positioning information only where infrastructure is installed. It also shows different positioning performance depending on the environment. In this paper, an integrated positioning technology integrating two positioning techniques with different error characteristics is proposed. A technique for correcting the error of PDR was designed by using the location information obtained through WiFi Measurement-based fingerprinting as the measurement of Extended Kalman Filte (EKF). Here, a technique is used to variably calculate the error covariance of the filter measurements using the WiFi Fingerprinting DB and apply it to the filter. The performance of the proposed positioning technology is verified through an experiment. The error characteristics of the PDR and WiFi Fingerprinting techniques are analyzed through the experimental results. In addition, it is confirmed that the PDR error is effectively compensated by adaptively utilizing the WiFi signal to the environment through the EKF to which the adaptive error covariance proposed in this paper is applied.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.128-135
• /
• 2006

This paper proposes the control method of fuzzy based sensor fusion by using the self localization of environment, position data by dead reckoning of the encoder and world map from sonic sensors. The proposed fuzzy based sensor fusion system recognizes the object and extracts features such as edge, distance and patterns for generating the world map and self localization. Therefore, this paper has developed fuzzy based control of mobile robot with experimentations in a corridor environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1348-1351
• /
• 1997

The federated Kaman filter(FKF) is being widely used in many multisensor navigatiion systems. It is know that the FKF has advantages of simplicity and fault-tolerance over other decentralized filter techniques. In this paper, optimal and suboptimal FKF configuratiions are mentioned and a covariance analysis technique for the suboptimal FKF is newly presented. The suboptimal FKF configuration, known as No-reset(NR) mode, has better fault tolerance capability than the optimal FKF coniguratioin. In the suggested technique, a suboptimal fusion process of FKF is considered a swell as suboptimal gains of local filters. An upper boun of error covariance for suboptimal FKF is derived. Also, it is mathematically shown that this bound is smaller thanexisting bound in the literatrue. A vehicle-navigaion system is designed using the FKF. In thissystem, a map constraing equation is introduced and used as a measurement equatioin of Kalman filter. Performance analysis is done by the suggested covariance analysis techniques.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.1
• /
• pp.33-43
• /
• 2018

In this paper, we describe an sound tracking mobile robot suitable for areas where GPS is not available. Sound sensors are attached to four sides of the robot in order to locate the person in a danger, and the robot is supposed to move to the yelling person. The traveling distance of the mobile robot is calculated by the encoder attached to the wheel of the mobile robot. The moving direction of the mobile robot is measured by a gyro sensor on the robot. When the person in danger pushes a button of the mobile robot, the mobile robot transmits the trajectory data to a designated server.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.9
• /
• pp.1071-1084
• /
• 1992

In this paper, the method for navigation and obstacle avoidance of the autonomous mobile robot is proposed. The proposed algorithms are based on the fuzzy inference system which is able to deal with imprecise and uncertain information. The self-tuning algorithm, which adopts the simplex method, modifies the parameters of membership functions of the input-output linguistic variables by changing the support of these fuzzy sets according to the integral of absolute error(IAE) of the system response. The wall-follwing navigation and obstacle avoidance of the mobile robot are based on range data measured from the internal sensors(encoder) and the outer sensors(sonar sensor). In addition, the algorithm for the obstacle detection proposed in this paper is based on the expert's experience. Finally, the effectiveness of navigation and obstacle avoidance algorithm is demonstrated through simulation and experiment.