• Title/Summary/Keyword: de-construction

검색결과 294건 처리시간 0.027초

Planing Hull의 선형선택(船型選擇)에 따르는 유체역학적(流體力學的) 고찰(考察) (The Hydrodynamical Study on the Selection of Planing Hull Forms.)

  • 박선영;최상혁
    • 대한조선학회지
    • /
    • 제2권1호
    • /
    • pp.9-14
    • /
    • 1965
  • Ship designers make every efforts to get faster ships in accordance with the development of the Naval Architecture. But for the speed lying over factor length ratio 2.5-3.0, we could put a powerful engine into the conventional round bottom displacement type vessels, but it is very difficult in view point of economy, weight and volume. The principal cause of these speed obstacles is the wave making resistance and researchers are trying to decrease this resistance. One of the resolving ways, planing hulls were applied to small high boats. Planing hull's advantage is not restricted to speed, but the workmanship of the planing hull is easier than those of displacement type vessels of round bottom. Planing hull, therefore, are widely applicable to the intermediate speed boats, which don't have enough high speed to take planing advantage, as well as high speed boats. We will discuss related phenomena of the planing hull in details and this paper we particularly interested in the interjection point(speed length ratio 3.0-3.5 by Mr. D. De Groots) between semi-planing and full planing hulls on the resistance characteristic curve. The paper by Prof. Keuck Chun Kim, "Some Characteristics of Straight Framed V-bottom Hull Forms", Journal of the society of Naval Architects of Korea, Vol.1, No.1, Dec.5, 1964, is referred to the V-bottom hull forms belonging to low speed region and determines practical applicable limit of the speed length ratio combined with construction costs, under which are still used by large commercial vessels. This is the interesting contrast between his and authors. We will further discuss the speed length ratio which is considered as a beginning point to planing effect. For this analysis, we choose 3 model ships: Model (1) and (2) have the same principal dimensions, model 3 varied dimension. Model (1) is full-planing hull, (2) is semi-planing hull and (3) is complete planing hull. They are aimed to collect proper design data for purposed ships.

  • PDF

Prediction of the remaining service life of existing concrete bridges in infrastructural networks based on carbonation and chloride ingress

  • Zambon, Ivan;Vidovic, Anja;Strauss, Alfred;Matos, Jose;Friedl, Norbert
    • Smart Structures and Systems
    • /
    • 제21권3호
    • /
    • pp.305-320
    • /
    • 2018
  • The second half of the 20th century was marked with a significant raise in amount of railway bridges in Austria made of reinforced concrete. Today, many of these bridges are slowly approaching the end of their envisaged service life. Current methodology of assessment and evaluation of structural condition is based on visual inspections, which, due to its subjectivity, can lead to delayed interventions, irreparable damages and additional costs. Thus, to support engineers in the process of structural evaluation and prediction of the remaining service life, the Austrian Federal Railways (${\ddot{O}}$ BB) commissioned the formation of a concept for an anticipatory life cycle management of engineering structures. The part concerning concrete bridges consisted of forming a bridge management system (BMS) in a form of a web-based analysis tool, known as the LeCIE_tool. Contrary to most BMSs, where prediction of a condition is based on Markovian models, in the LeCIE_tool, the time-dependent deterioration mechanisms of chloride- and carbonation-induced corrosion are used as the most common deterioration processes in transportation infrastructure. Hence, the main aim of this article is to describe the background of the introduced tool, with a discussion on exposure classes and crucial parameters of chloride ingress and carbonation models. Moreover, the article presents a verification of the generated analysis tool through service life prediction on a dozen of bridges of the Austrian railway network, as well as a case study with a more detailed description and implementation of the concept applied.

일본 지방도시의 문화전략과 '지역다움'의 논리 (The Politics of Space in Cultural Strategies of Japanese Local Cities)

  • 조아라
    • 한국지역지리학회지
    • /
    • 제14권5호
    • /
    • pp.480-491
    • /
    • 2008
  • 세계화와 탈산업화 속에서 장소간 경쟁이 치열해짐에 따라, 많은 도시는 문화전략을 통해 도시재생과 경쟁력 강화를 꾀하고 있다. 이 글은 일본의 지방도시에서 전개되고 있는 문화전략에 주목하여 '지역다움'이 그 핵심 키워드가 되고 있음을 밝히고, 이에 담겨있는 논리를 밝히고자 하였다. 일본의 지방 도시는 고도경제성장 이후 사회적 가치관의 전환, 중앙정부의 일련의 문화정책, 지자체의 적극적인 문화전략 속에서 '일본인의 고향'으로 자리매김 되었다. 최근에는 분권개혁 속에서 지역다움'이 지방도시 문화전략의 강력한 담론으로 등장하고 있다. 지역다움은 표면적으로는 '지역의 개성' 또는 '실존적 장소성'이라는 논리로 정당화되는데, 그 이면에는 행위주체간 사회적 역학관계가 지역다움을 정의하는 주요 논리로 작동하고 있다. 결과적으로 일본에서 지역다움은 국가다움의 틀 속에 제한되는 문제가 나타난다. 지리학에서는 지방도시의 문화전략에서 지역다움이 구성되는 논리에 주목하여 이를 신중하게 접근할 필요가 있다.

  • PDF

현대미술에 나타난 사진의 활용과 그 유형학적 분류 (Application and Its Typological Classification of Photographs Shown in Contemporary Art)

  • 이경률
    • 비교문화연구
    • /
    • 제33권
    • /
    • pp.193-239
    • /
    • 2013
  • A photograph, which was applied to contemporary art, plays a very important role in the whole of the multiplied and diversified contemporary arts today. The application of photos, which were shown in contemporary art following the 1950s, can be classified into five types according to role and function of a photo in the process of developing a work. However, this classification is shown a little ambiguously. That is because photos of being utilized by artists are indicated very diversely depending on their artistic strategy and situation. As the first type, a few painters utilize a photo as mirror of reality in order to materialize a challenging and revolutionary idea with going against traditional picture in their pictorial practice. As the second classification, especially American painters utilize a photo as material component of forming their picture like photo-montage or collage. The combined application of this medium is first doing genre de-construction and hybridization of post-modernism in the 1980s while ultimately aiming at social criticism or political satire. The third type implies particularly a case that avant-garde artists utilize a photo as evidence of a work. In this case, a photo is employed as evidence of a work, which disappears in the temporal space essentially like body art, land art, and performance. Also, as the fourth type is a case of utilizing a photo for artistic concept of a work, not pictorial practice of picture, it is utilized often as important artistic strategy of conceptual artists. The final type of utilizing photo is a case of applying photo as formative tool on behalf of dye-stuffs or crayon in order to record a section of reality, which always continues regardless of event or meaning any more, in the traditional picture. In this case, a work is indicated as a photo of having a form of picture, namely, as Forme-tableau. The main subject is indicated there as a daily case of being repeated always the extremely common and revived theme.

중국 현대 상업건축 실내 공간의 문화적 표현특성에 대한 사례연구 (A Case Study on the Characteristics of Cultural Expression in Contemporary Commercial Architecture Design in China)

  • 위더셩
    • 한국콘텐츠학회논문지
    • /
    • 제19권10호
    • /
    • pp.32-44
    • /
    • 2019
  • 본 논문은 문화적 표현특성을 기초로, 중국 6개 최대 도시의 대표적인 현대 상업건축 공간 사례에 대해 비교분석을 진행한 것이다. 본 논문에서는 중국 현대 상업용 건물의 실내공간 문화가 지속 가능한 발전을 이루기를 기대한다. 6개 사례를 각각 문화의 전통성, 지역성, 대중성, 기술성, 생태성 5가지 관점에서 분석했고 결과는 다음과 같다. 첫째, 문화의 전통성은 상업건축의 실내공간에서 구체적인 지역의 전통적 요소를 중시하도록 요구한다. 둘째, 문화의 지역성은 상업건축의 실내공간이 있는 곳의 경제발전 정도, 역사적 내막, 지리적 환경조건, 기후 등 사회와 자연환경 요인과 밀접하게 연관되어 있다. 셋째, 문화의 대중성은 상업건축의 실내공간을 통해 대중문화의 통합화, 레저화, 오락화, 기호화를 나타낸다. 넷째, 문화의 기술성은 현지의 문화성을 가진 시공 방법, 구조 형식, 재료를 상업건축 실내공간에 통합하는 것이다. 다섯째, 문화의 생태성은 상업건축의 실내공간에 식물을 배치하고, 건강하고 쾌적하며 안전한 환경을 만드는 것이다.

Compacted expansive elastic silt and tyre powder waste

  • Ghadr, Soheil;Mirsalehi, Sajjad;Assadi-Langroudi, Arya
    • Geomechanics and Engineering
    • /
    • 제18권5호
    • /
    • pp.535-543
    • /
    • 2019
  • Building on/with expansive soils with no treatment brings complications. Compacted expansive soils specifically fall short in satisfying the minimum requirements for transport embankment infrastructures, requiring the adoption of hauled virgin mineral aggregates or a sustainable alternative. Use of hauled aggregates comes at a high carbon and economical cost. On average, every 9m high embankment built with quarried/hauled soils cost $12600MJ.m^{-2}$ Embodied Energy (EE). A prospect of using mixed cutting-arising expansive soils with industrial/domestic wastes can reduce the carbon cost and ease the pressure on landfills. The widespread use of recycled materials has been extensively limited due to concerns over their long-term performance, generally low shear strength and stiffness. In this contribution, hydromechanical properties of a waste tyre sand-sized rubber (a mixture of polybutadiene, polyisoprene, elastomers, and styrene-butadiene) and expansive silt is studied, allowing the short- and long-term behaviour of optimum compacted composites to be better established. The inclusion of tyre shred substantially decreased the swelling potential/pressure and modestly lowered the compression index. Silt-Tyre powder replacement lowered the bulk density, allowing construction of lighter reinforced earth structures. The shear strength and stiffness decreased on addition of tyre powder, yet the contribution of matric suction to the shear strength remained constant for tyre shred contents up to 20%. Reinforced soils adopted a ductile post-peak plastic behaviour with enhanced failure strain, offering the opportunity to build more flexible subgrades as recommended for expansive soils. Residual water content and tyre shred content are directly correlated; tyre-reinforced silt showed a greater capacity of water storage (than natural silts) and hence a sustainable solution to waterlogging and surficial flooding particularly in urban settings. Crushed fine tyre shred mixed with expansive silts/sands at 15 to 20 wt% appear to offer the maximum reduction in swelling-shrinking properties at minimum cracking, strength loss and enhanced compressibility expenses.

Computational optimized finite element modelling of mechanical interaction of concrete with fiber reinforced polymer

  • Arani, Khosro Shahpoori;Zandi, Yousef;Pham, Binh Thai;Mu'azu, M.A.;Katebi, Javad;Mohammadhassani, Mohammad;Khalafi, Seyedamirhesam;Mohamad, Edy Tonnizam;Wakil, Karzan;Khorami, Majid
    • Computers and Concrete
    • /
    • 제23권1호
    • /
    • pp.61-68
    • /
    • 2019
  • This paper presents a computational rational model to predict the ultimate and optimized load capacity of reinforced concrete (RC) beams strengthened by a combination of longitudinal and transverse fiber reinforced polymer (FRP) composite plates/sheets (flexure and shear strengthening system). Several experimental and analytical studies on the confinement effect and failure mechanisms of fiber reinforced polymer (FRP) wrapped columns have been conducted over recent years. Although typical axial members are large-scale square/rectangular reinforced concrete (RC) columns in practice, the majority of such studies have concentrated on the behavior of small-scale circular concrete specimens. A high performance concrete, known as polymer concrete, made up of natural aggregates and an orthophthalic polyester binder, reinforced with non-metallic bars (glass reinforced polymer) has been studied. The material is described at micro and macro level, presenting the key physical and mechanical properties using different experimental techniques. Furthermore, a full description of non-metallic bars is presented to evaluate its structural expectancies, embedded in the polymer concrete matrix. In this paper, the mechanism of mechanical interaction of smooth and lugged FRP rods with concrete is presented. A general modeling and application of various elements are demonstrated. The contact parameters are defined and the procedures of calculation and evaluation of contact parameters are introduced. The method of calibration of the calculated parameters is presented. Finally, the numerical results are obtained for different bond parameters which show a good agreement with experimental results reported in literature.

귀에트 주택에 나타난 르 꼬르뷔지에의 건축개념 및 제5원칙에 관한 고찰 (A Study on the Features of Architectural Concept Applied in Maison Guiette and Le Corbusier's 'Five Points of a New Architecture')

  • 김종성
    • 대한건축학회논문집:계획계
    • /
    • 제35권7호
    • /
    • pp.89-99
    • /
    • 2019
  • The purpose of this study is to reveal the meaning of Le Corbusier's works focused on Maison Guiette. This House was completed in 1926, 4 year later than the work of the Citrohan and also, this house is the only remaining mixed use Dwelling in Belgium. It offers a fine example of the early architectural concepts of Le Corbusier's. Despite these important facts, the meanings of the ideas of this house have not been paid attention as much as other houses constructed at the same period, such as Maison La Roche, Maison Stein de Monzie, Villa Savoye, etc. In his book, 'Oeuvre Complete 1910-1929', Le Corbusier mentioned as follows: "A special solution imposed by Belgian housing developments characterized by a dimension of 6 meters of frontage and a very great depth. The staircase serving the various floors is like the ladder of Jacob climbs Charlie Chaplin in the "Kid" and This house is an architectural experiments of his ideas. And this study aims at analysing the relationship between Maison Guiette and spaces on the basic of Le Corbusier's 'Five Points of a New Architecture' which had a great effects on architectural history and became a fundamental elements for the change into the Modern housing. By analysing the points in regard with the Features of Architectural Concept Applied in Maison Guiette, The Five Points are the background of the interpenetration of the interior and the exterior. To attain this, this research appraises each points in detail in regards with Maison Guiette. The study of Maison Guiette will be an important architectural subject to clarify the meaning of his later works and ideas.

프랑스와 한국의 리모델링 사례분석을 통한 아파트 계획과 주택정책 비교 연구 (A Study on the Housing Policies and Design Characteristics of Apartment Remodeling by Comparative Analysis between Korea and France Cases)

  • 장한두;제해성
    • 대한건축학회논문집:계획계
    • /
    • 제35권9호
    • /
    • pp.131-142
    • /
    • 2019
  • The purpose of this study was to find out the characteristics of housing policies and apartment designs by comparison of supplying and remodeling apartments between France and Korea. The literature review was used in Korea cases and the literature review, site investigation, and expert interviews were used in France cases. At first, by reviewing the related literatures about the apartment developments and regenerations in France and Korea, twelve remodeling cases were represented respectively in Ile de France and Seoul. As a result, in housing policy, the Korean housing market had a shortage of low-priced houses related to biased apartment developments by private sector dependence. Consequently, the living in Korea generally required the high price in low quality houses. But in France, the housing policies were very successful in housing quantity, quality, and expense. It is involved in balances between the public housing supply and the activation of a private housing market based on the government support policy. Nevertheless, in the success of the apartment as a house type, apartments in France means the social elimination because of the supply method problems and the management failures of HLM institutions. However, in Korea, the apartment implies the successful life of the middle class population because of the competitive evolutions during 40 years as a market housing. Secondly, In the characteristics of remodeling, the remodeling in Korea was for property value improvements. It mainly executed to expand the size of a house by expansion of living space. However the remodeling in France was for social mixes and connections with the surrounding area. It mostly performed by various design methods such as vertical merging houses, partial removal, reconstruction, and construction of a local community centers and mixed-use residential buildings. This study shows the simultaneously remodeling features of those two countries. These findings can be used in developing effective strategies for the public housing regenerations in Korea and other countries.

빅데이터와 개인정보: 규제변화의 필요성 (Big Data and Personal Information: Needs for Regulatory Change)

  • 이호선
    • 한국정보통신학회논문지
    • /
    • 제23권12호
    • /
    • pp.1565-1570
    • /
    • 2019
  • 빅데이터를 활용한 다양한 가능성에 대해서는 최근 수년 동안 지속적으로 이야기되어 왔다. 한편으로 개인정보보호의 중요성 또한 점차 강조되고 있는 것이 현실이다. 빅데이터의 활용성을 높이기 위해 개인과 관련된 다양한 정보들을 취합하는 과정에서 개인을 어느 정도까지 특정할 것인가 또는 빅데이터를 구축하고 활용하는 여러 기업들이 개인정보를 어느 수준까지 활용하여 개인화 서비스를 제공해야 하는가와 같은 문제들이 발생하고 있다. 본 논문에서는 개인정보의 보호와 관련하여 유럽의 GDPR과 미국 캘리포니아주의 CCPA 사례를 살펴보고 국내의 빅데이터3법 개정안에 대해 살펴보았다. 또한 개인정보의 빅데이터 활용에 있어 비식별화된 정보의 재식별 가능성에 대한 고려, 개인정보 사용 동의의 사회적 비용 측면, 민간과 정부의 빅데이터 구축과 결합에서 발생가능한 문제, 규제환경 형성에서의 정책적 시사점에 대해 논의하였다.