• Korea Trade Review
• /
• v.42 no.4
• /
• pp.139-157
• /
• 2017

Whether an investor can invoke a dispute settlement procedure stipulated in other BIT based on the MFN clause in the original BIT is an important issue. There is a difference in the interpretation of MFN clause in which the scope of the treatment stipulates the slightly different contents for each investment treaty. Therefore, this study considered ICSID arbitration cases related to the applicability of MFN clause for investment dispute settlement provisions. There are two different approaches for the applicability of MFN clause by arbitral tribunals. At first, the expanded interpretation of the MFN clause can be applied to procedural regulations, in that the purpose of the investment treaty is to protect foreign investors and to ensure their status. So, foreign investors can invoke a BIT of a third country that is advantageous to them. Second, the limited interpretation of the MFN clause can not be applied to procedural regulations. Without explicit regulation, the term treatment can not be considered to include dispute resolution provisions. And the BIT that the host state has concluded with third country is a treaty that applies only to the contracting party, so it can not be used by foreign investors of other nationality. Therefore, this study suggests concretely stipulating the scope of MFN clause under the investment treaty, highlighting that certain restrictions should be applied to the MFN clause. Furthermore, it is required continually investigating and analyzing the database of the scope of MFN clause.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.75-87
• /
• 2013

This study developed a GIS-based suitability assessment model of coastal zoning system that is needed in the substantial classification of coastal zoning system according to the establishment of law about coastal zoning system. First, this study investigated several kinds of regulations, GIS database and application system related coastal area. Also, grid data model was selected as the GIS analytical model for calculating items of suitability assessment of coastal zoning system. And Grid-based analytical method was suggested for calculating items composing of sea and spatial location characteristics including physical one. Critical values of items were presented using standards that were suggested in coastal regulations and land suitability assessment. Especially, this study presented a calculation method of continuous pattern as fuzzy set function for reflecting the characteristics of GIS data. And this study classified the suitability grade using Z-score and developed model designating coastal zone as conservation management priority, utilization management priority, and planning management priority. This study is judged that very efficient business performance is possible if we consider the spatial coverage of study area and GIS database when the suitability assessment model of coastal zoning system that is suggested in this study, is applied to business works.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11S
• /
• pp.3702-3713
• /
• 2000

Telecommunications standards have two different types of regulations: one is a law. enacted by government which all telecommunications related industries must observe. The other is a recommendatory standards. formulated by either government agency or some standardization organizations. Observation of these standards is not obligatory. However, technical standards are strict laws and ordinances based on common judgement and various conditions for evaluation of levels and limits. This paper deals with enhancing productivity of enactment and revision of technical standards. Through database of above related information we secure information continuity and public property of cyber space for the public. In this paper. we also classify recent data within the website in and out of the country offering four different methods of information retrieval and management system. The four retrieval methods suggested in this paper are itemized keyword retrieval. hierarchical retrieval, regulatory keyword retrieval and chronological keyword retrieval. These various retrieval methods provide the public with information of enactment and amendment of laws and regulations in the cyber space. thereby guarantees the sharing of information. Finally the important feature of the information retrieval system implemented in this paper is the online updating capability of law and regulations through the internet.

• Preventive Nutrition and Food Science
• /
• v.10 no.1
• /
• pp.29-33
• /
• 2005

To facilitate establishing regulations for irradiated foods, Korean traditional soybean-based fermented powdered doenjang (PD), kanjang (PK), kochujang (PKC) and chungkukjang (PC) were irradiated at 1, 3, 5 and 7 kGy, and subjected to irradiation detection analyses as part of establishing a database for detecting irradiated foods. Photostimulated luminescence (PSL) and electron spin resonance (ESR) were applied as the detection methods. Using PSL analysis, the irradiated PD, PK and PKC could be easily distinguished from the non-irradiated ones, while irradiation of the PC at 5 kGy or higher was detectable. The ESR spectra of the irradiated PD, PK and PKC exhibited symmetrical multiplet lines, which might be induced from the crystalline sugar, whereas, the PC showed a single signal at the paramagnetic centers. The signal intensity increased with incremental increases of irradiation doses distinguishing the irradiated samples from the control. In addition, the peak height also revealed that irradiation induced an increment in the intensity of single and/or multiplet lines of the ESR signals, resulting in clear confirmation of irradiation. Thus, the data from this study could be used as references for detecting irradiated soybean-based fermented powdered sauces.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.2
• /
• pp.105-114
• /
• 2017

Objectives: The Ministry of Employment and Labor's enforcement programs, such as workplace monitoring inspection, are one of the major public efforts to protect worker's health. Therefore, a more effective inspection method is required for workplace monitoring, which is helpful for controlling health hazards in the workplace. Methods: For this study, we investigated the related safety and health laws, regulations, and inspection guidelines from the USA, Japan, and Korea. We also analyzed the provisions of industrial safety and health acts, which are related to enhancing the reliability of workplace monitoring. We applied the process of opinion convergence through an experts meeting for our research. Results: We proposed an efficient inspection scheme for workplace monitoring that includes how to select companies(mainly randomized inspections by using a workplace measurement database and workers' compensation insurance database), how to proceed with the inspection process(mainly unannounced visits), and who should carry out this project. Conclusions: We conclude that our proposal for the inspection of workplace monitoring could be a very effective tool for reducing the numbers of companies that do not undertake workplace monitoring and could produce reliable monitoring results.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.4
• /
• pp.423-432
• /
• 2017

Objectives: This study was conducted to evaluate asbestos handling history of workers at automobile manufacturing plants in Korea. Methods: National regulations on asbestos and Korea Occupational Safety and Health Agency(KOSHA) database on the information of asbestos containing products were reviewed. We investigated asbestos related materials from one automobile manufacturing plant. Material safety data sheets(MSDS) collected in 2010, work environment monitoring results reported from 2000 to 2013, trade union reports and asbestos survey reports were reviewed. We also interviewed workers with long career and did walk-through survey. Results: The Ministry of Labor in Korea has permitted asbestos manufacturing since 1990. In 1997, the use of crocidolite and amosite asbestos were banned. In 2007, the Korean government announced a total ban on the manufacturing, importation and use of all kinds of asbestos, which took full effect in 2009. A total of 174 asbestos products information from KOSHA database was analyzed. Extruded cement panel for building, special brake for crane farm machinery, gasket, joint sheet and thermal insulator were produced until 2007. From automobile manufacturing plant survey, we confirmed that asbestos containing materials(ACM) such as gasket, heating induction materials have been used until 2011. Asbestos containing building materials(ACBM) such as bamlites, slate and ceiling tex were reported at 122 asbestos dismantling projects in 2014. Conclusion: Although the use of all kinds of asbestos were banned from 2009, ACMs and ACBMs installed before 2009 were still found at automobile manufacturing plant until 2011 and 2014 respectively. In particular, asbestos slates should be managed because most of slates had not been removed until 2014.

• Journal of the Korean Society of Safety
• /
• v.29 no.3
• /
• pp.98-106
• /
• 2014

This study proposes severity analysis for pedestrian accidents by improving variables which were used for general severity analysis. The existing variables were collected based on the interviews with policeman or witnesses and evidence of accidents. Therefore, existing variables were subjective and had several measurement errors. In order to improve such problems, this study collected variables from vehicle recorder of taxi which recorded the moment of accidents. As a result, explanatory power of independent variables was enhanced and the complete objective variables could be collected. After collecting variables, ordered probit model was developed by utilizing vehicle recorder database. Fitness of ordered probit model was 0.23. Vehicle speed and pedestrian's eye direction variables were the most critical factors for severity of pedestrian accident. In addition, severity analysis for vulnerable pedestrian was carried out. As a result, it was revealed that vehicle speed, pedestrian's eye direction and safety zone variables affected the severity of pedestrian accidents most. Particularly, vehicle speed variable is the most important factor. Consequently, driver's defensive driving and compliance to the regulations are the priority to reduce severity of pedestrian accidents and prevent pedestrian accident.

• International conference on construction engineering and project management
• /
• 2024.07a
• /
• pp.1238-1245
• /
• 2024

The construction industry faces the challenge of providing effective, engaging, and rule-specific safety learning. Traditional methodologies exhibit limited adaptability to technological advancement and struggle to deliver optimal learning experiences. Recently, there has been widespread adoption of information retrieval and ontology-based chatbots, as well as content delivery methods, for safety learning and education. However, existing information and content retrieval methods often struggle with accessing and presenting relevant safety learning materials efficiently. Additionally, the rigid and complex structures of ontology-based approaches pose obstacles in accommodating dynamic content and scaling for large datasets. They require more computational resources for ontology management. To address these limitations, this paper introduces iSafe Chatbot, a novel framework for construction safety learning. Leveraging Natural Language Processing (NLP) and Large Language Model (LLM), iSafe Chatbot aids safety learning by dynamically retrieving and interpreting relevant Occupational Safety and Health Administration (OSHA) rules from the comprehensive safety regulation database. When a user submits a query, iSafe Chatbot identifies relevant regulations and employs LLM techniques to provide clear explanations with practical examples. Furthermore, based on the user's query and context, iSafe Chatbot recommends training video content from video database, enhancing comprehension and engagement. Through advanced NLP, LLM, and video content delivery, iSafe Chatbot promises to revolutionize safety learning in construction, providing an effective, engaging, and rule-specific experience. Preliminary tests have demonstrated the potential of the iSafe Chatbot. This framework addresses challenges in accessing safety materials and aims to enhance knowledge and adherence to safety protocols within the industry.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.3
• /
• pp.348-356
• /
• 2013

Denim washing is processed with different washing techniques such as stone washing, chemical washing, sand washing, and bio washing. Cellulase bio washing can meet environmental regulations that enhance and rectify problems associated with traditional decolorization techniques; however, stone washing needs to be added to the processing because it produces a low decolorization effect. There is also the problem of additional strength reduction. To prevent these problems, a new enzyme for bio washing is required. This study examines the optimum laccase treatment conditions on denim and evaluated the characteristics of laccase-treated denims to establish a database of eco-friendly new decolorization process on denim using a new laccase enzyme. The results show that the optimum conditions of laccase on denim are a pH of 4.0, $30^{\circ}C$, 7% (o.w.f.), and 6 hours in 10 mM of buffer concentration. UV absorbance and HPLC identified isatin coexist with anthranilic acid in solution after laccase treatment on denim. Results of the surface color, the surface morphology and the tensile strength indicate that laccase treatment shows an excellent decolorization effect without fiber damage. The wet cleaning fastness and the perspiration fastness also improved.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.72-79
• /
• 2009

Recently, the internal combustion engines have focused on reducing the $CO_2$ gas in order to cope with severe regulations for fuel economy. Therefore, various new technologies have been developed. Among them, cooling system is spotlighted because it has great effect on fuel economy. In this study, we measured the friction losses of engine parts according to engine speed and oil temperature. We also obtained optimized oil temperature which has the minimum friction losses. Then, we selected optimized oil temperature range and gave informations of friction losses for each engine parts. In addition, we analyzed relationship between coolant temperature and oil temperature by using engine performance test system. From this experiment, we obtained the database for relationship between coolant temperature and oil temperature. Then, we found the optimal temperature about engine oil. We analyzed BSFC and exhaust emissions by controlling the high coolant temperture. If we controlled coolant temperature more higher, BSFC has a little difference but exhaust emissions such as THC and CO have reduced. By using these experimental results, we predicted that IC engine have more low fuel consumption and exhaust emissions by optimized cooling control strategy.