• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.526-531
• /
• 1992

Partial derivatives are easily computed analytically assuming that all the geometric information is known. However, there are computational difficulties in getting accurate partial derivatives directly from a range image since an image is a discrete version of continuous data contaminated with some noise. In this paper, we develop a general window function to compute partial derivatives based on the least square surface fitting method. A dynamic selective surface fitting method is introduced to make the window less sensitive to noise. Any degree of partial derivative can be obtained by a simple convolution between an image and window functions.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.1
• /
• pp.11-16
• /
• 2010

Wafer Pre-Alignment is to find the center and the orientation of a wafer and to move the wafer to the desired position and orientation. In this paper, an area camera based pre-aligning method is presented that captures 8 wafer images regularly during 360 degrees rotation. From the images, wafer edge positions are extracted and used to estimate the wafer's center and orientation using least squares circle fitting. These data are utilized for the proper alignment of the wafer. For accurate alignments, camera calibration methods using high order polynomials are used for converting pixel coordinates into real-world coordinates. A complete pre-alignment system was constructed using mechanical and optical components and tested. Experimental results show that alignment of wafer center and orientation can be done with the standard deviation of 0.002 mm and 0.028 degree, respectively.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.408-413
• /
• 2011

In this paper, a real-coefficient approach to Adaptive Frequency Sampling (AFS) technique is developed for efficient equivalent circuit modeling of RF components. This proposed method is advantageous than the vector fitting technique and the conventional AFS method in terms of fewer samples leading to a lower order of a rational function on a given data and to a direct conversion to an equivalent circuit for PSPICE(Personal Simulation Program with Integrated Circuit Emphsis) simulation, respectively. To validate the proposed method, the distributed equivalent circuit of a presented multi-layered RF low-pass filter is obtained using the proposed real-coefficient AFS, and then comparisons with EM simulation and circuit simulation for the device under consideration are achieved.

• Applied Microscopy
• /
• v.41 no.1
• /
• pp.75-79
• /
• 2011

For quantitative analysis of nano-crystal structure, we reported the accuracy improvement method of lattice parameters measured from electron diffraction. For calculation of Au lattice parameters used as a standard crystal structure, it was considered two different acquisition methods (detector and enegy-filter) and three different calculation methods (conventional, least-square and regression fit). As a result, the measurement reliability could be enhanced by using CCD camera which gives higher performance, while energy-filtering did not affect the improvement the camera constant accuracy. Also, the accuracy of lattice parameters could be improved up to $10^{-4}$ order by regression fitting with correction formula. Finally, it is expected that the combination of regression fitting and intensity extraction from energy-filtered precession electron diffraction gives a solution of quantitative structure analysis for unknown nano-crystals.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.12
• /
• pp.1836-1842
• /
• 2012

Torque is proportional to the rate of change of inductance in a switched reluctance motor (SRM), and hence, phase inductance is an important parameter in determining the behavior of an SRM. Therefore, the accurate prediction of inductance with respect to rotor position makes a significant contribution to designing an SRM and its analytical approach is not straightforward due to nonlinear flux distribution. Although several different approaches using a finite element analysis (FEA) or curve-fitting tool have been employed to compute phase inductance [2-5], they are not suitable for a simple design procedure because the FEA necessitates a large amount of time in both modeling and solving with complexity for every motor design, and the curve-fitting requires the data of flux linkage from either an experimental test or an FEA simulation. In this paper, phase inductance is predicted by means of a permeance method, and the proposed approach is analytically verified in terms of the accuracy of estimated inductance compared to inductance obtained by FEA.

• Communications for Statistical Applications and Methods
• /
• v.13 no.2
• /
• pp.327-341
• /
• 2006

Winkler (1990, 2001), Sitter and Skinner (1994), Wilson and Sitter (2002) present a method which applies linear programing to designing surveys with multi-way stratification, primarily in situation where the desired sample size is less than or only slightly larger than the total number of stratification cells. A comparison is made with existing methods both by illustrating the sampling schemes generated for specific examples, by evaluating sample mean, variance estimation, and mean squared errors, and by simulating sample mean for all methods. The computations required can, however, increase rapidly as the number of cells in the multi-way classification increase. In this article their approach is applied to multi-way stratification using real data.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1995.10b
• /
• pp.15-24
• /
• 1995

This paper describes a system that can be used to recognize an unknown material regardless of the fuzzy neural network(FNN). There are some problems to realize the recognition system using temperature response. It requires too many memories to store the vast temperature response data and it has to be filtered to remove noise which occurs in experiment. And the temperature response is influenced by the change of ambient temperature. So, this paper proposes a practical method using curve fitting to remove above problems of memories and noise. and FNN is proposed to overcome the problem caused by the change of ambient temperature. Using the FNN which is learned by temperature responses on fixed ambient. Temperatures and known thermal conductivity, the thermal conductivity of the material can be inferred on various ambient temperatures. So the material can be recognized by the thermal conductivity.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.34-40
• /
• 2012

Flux linkage of phase windings or phase inductance is an important parameter in determining the behavior of a switched reluctance motor (SRM) [1-8]. Therefore, the accurate prediction of inductance at aligned and unaligned rotor positions makes a significant contribution to the design of an SRM and its analytical approach is not straightforward due to nonlinear flux distribution. Although several different approaches using a finite element analysis (FEA) or curve-fitting tool have been employed to compute phase inductance [2-5], they are not suitable for a simple design procedure because the FEA necessitates a large amount of time in both modeling and solving with complexity for every motor design, and the curve-fitting requires the data of flux linkage from either an experimental test or an FEA simulation. In this paper, phase inductance at aligned and unaligned rotor positions is estimated by means of numerical method and magnetic equivalent circuit as well, and the proposed approach is analytically verified in terms of the accuracy of estimated inductance compared to inductance computed by an FEA simulation.

• Journal of Fashion Business
• /
• v.12 no.1
• /
• pp.109-119
• /
• 2008

The purpose of this study is to dvelop the basic pattern of wome which are fitting for 75A. The collected data were statistcally processed usig the SPSS 10.0 for Mans Standard Deiation, Cronbach's $\alpha$, etc. This study suggested a size chart for body measurement for constructing basic brssiere patterns with size of 75A. The construction of this experimental brassiere were lower cup, upper cup, front panel and wing and characterized by a round cup wired as well as a full cup embrcing the entire breasts. The drafting method for constructing basic brassiere patterns for 75A was completed by selecting a total of 11subjects, and two wearing tests were carried out with the subjects. the dimensions and shapes of the basic brassiere pattern suggested in this research proved to be fitting and to have a wearing effect that brings together and supports the breasts.

• Journal of Magnetics
• /
• v.18 no.1
• /
• pp.57-64
• /
• 2013

Flux linkage of phase windings is a key parameter in determining the behavior of a switched reluctance motor (SRM) [1-8]. Therefore, the accurate prediction of flux linkage at aligned and unaligned rotor positions makes a significant contribution to the design of an SRM and its analytical approach is not straightforward due to nonlinear saturation in flux. Although several different approaches using a finite element analysis (FEA) or a curve-fitting tool have been employed to compute phase flux linkage [2-5], they are not suitable for a simple design procedure because the FEA necessitates a large amount of time in both modeling and solving with complexity for every motor design, and the curve-fitting requires the data of flux linkage from either an experimental test or an FEA simulation. In this paper, phase flux linkage at aligned and unaligned rotor positions is estimated by means of a reluctance network, and the proposed approach is analytically verified in terms of accuracy compared to FEA.