• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.90-104
• /
• 2019

In this study, CALPUFF modeling was performed, using a real surface and upper air meterological data to predict trustworthy modeling-results. Pollutant-releases from windscreen chambers of enclosed poultry farms, P1 and P2, and from a open poultry farm, P3, and their diffusing behavior were modeled by CALPUFF modeling with volume sources as well as by finally-adjusted CALPUFF modeling where a linear velocity of upward-exit gas averaged with the weight of each directional-emitting area was applied as a model-linear velocity ($u^M_y$) at a stack, with point sources. In addition, based upon the scenario of poultry farm-releasing odor and particulate matter (PM) removal efficiencies of 0, 20, 50 and 80% or their corresponding emission rates of 100, 80, 50 and 20%, respectively, CALPUFF modeling was performed and concentrations of odor and PM were predicted at the region as a discrete receptor where civil complaints had been frequently filed. The predicted concentrations of ammonia, hydrogen sulfide, $PM_{2.5}$ and $PM_{10}$ were compared with those required to meet according to the offensive odor control law or the atmospheric environmental law. Subsequently their required removal efficiencies at poultry farms of P1, P2 and P3 were estimated. As a result, a priori assumption that pollutant concentrations at their discrete receptors are reduced by the same fraction as pollutant concentrations at P1, P2 and P3 as volume source or point source, were controlled and reduced, was proven applicable in this study. In case of volume source-adopted CALPUFF modeling, its required removal efficiencies of P1 compared with those of point source-adopted CALPUFF modeling, were predicted similar each other. However, In case of volume source-adopted CALPUFF modeling, its required removal efficiencies of both ammonia and $PM_{10}$ at not only P2 but also P3 were predicted higher than those of point source-adopted CALPUFF modeling. Nonetheless, the volume source-adopted CALPUFF modeling was preferred as a safe approach to resolve civil complaints. Accordingly, the required degrees of pollution prevention against ammonia, hydrogen sulfide, $PM_{2.5}$ and $PM_{10}$ at P1 and P2, were estimated in a proper manner.

• Korean Journal of Family Social Work
• /
• no.58
• /
• pp.5-36
• /
• 2017

This study aims to empirically analyze whether the women's cognitive attitude toward gender role, which is formed through social norms, enforces the gender division of housework. In this study, 4,435 married women aged 18-59 years from the 5th wave dataset of Korean Longutudinal Survey of Women and Family Data were selected for analysis. Using the Structural Equation Model(SEM), we examine the direct effect of "attitude toward behavior" and "subjective norm" on the domestic working hours and whether those two independent variables, such as "attitude toward behavior" and "subjective norm," influence the mediator variable "Behavior Intention" which in turn affect the dependent variable. The study reveals that "attitude toward the gender division of housework" has a statistically significant direct effect on the domestic working hours as well as an indirect effect operating through "behavior intention." And"subjective norm "has only a statistically significant indirect effect on the domestic working hours, operating through "behavior intention." Despite the fact that many women are now aware that various work-life balance policies are avaliable to mitigate the gender inequality of domestic works, it is proven that the gender division of housework becomes worse. The reason behind this is not only because there exist some problems in implementing the institutions themselves, but also because women's deeply internalized self-perception of gender role based on the traditional patriarchal culture somehow exacerbates the gender division of housework. Hence, in order to instill a progressive change in gender division of housework, it is important for women to try to change the way they perceive the stereotypical gender roles as well as for men to treat women equally.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.1
• /
• pp.45-52
• /
• 2019

This experiment was carried out to study the change of productivity and feed value in different types of hilly pasture. The pasture utilized in the experiment was placed on the experimental farm of Pyeongchang Campus of Seoul National University. Forage production type(FP; Orchardgrass 18 + Tall Fescue 12 + Timothy 5 + White clover 5 kg/ha) and Public farm type(PF: Orchardgrass 12 + Tall Fescue 18 + Timothy 5 + White clover 5 kg/ha) pasture were established in September 3, 2014 and utilized (cutting or grazing) four times every year. Growth characteristics, yield and forage quality were investigated for two years. Plant height of grasses was the highest in the $1^{st}$ cutting and legumes was in the $2^{nd}$ cutting. Dry matter (DM) content was highest at every the $1^{st}$ cut grasses significantly lower at the $2^{nd}$ harvest (p<0.05). However, there was no significant difference in the $2^{nd}$, $3^{rd}$ and $4^{th}$ harvest in 2016. In the botanical composition change, the portion of legume was gradually increased after pasture establishment and the ratio of weed and bare land was higher at $2^{nd}$ and $3^{rd}$ cutting, but it was decreased at $4^{th}$ harvest. There was no significant difference in 2016 of fresh yield between two farm types (p>0.05). The yield of dry matter showed similar trend of fresh yield and forage production type was higher than that of public farm type (p<0.05). The forage intake by livestock was 1,452 kg/ha in 2015 and 1,743 kg/ha in 2016. Pasture utilization ratio of public farm type pasture was highest in the $3^{rd}$ grazing time. Forage quality of pasture in relation to management type had not significant difference, but there was difference in harvest times. Crude protein (CP) was the lowest in the $1^{st}$ harvest and total digestible nutrient (TDN) was highest in the $1^{st}$ harvest and lowest in the $4^{th}$ harvest. Based on the above results, it is found that the establishment of pasture suitable for farm's situation is important for set up of Korean model of hilly pasture. Although the forage production type is superior on forage productivity, it is recommended that the results will be provided as basic data for management of public farm type in the future.

• Korean Journal of Environment and Ecology
• /
• v.33 no.4
• /
• pp.472-480
• /
• 2019

Selection of the plant material for planting to reduce fine dust should comprehensively consider the visual characteristics, such as the shape and texture of the plant leaves and form of bark, which affect the adsorption function of the plant. However, previous studies on reduction of fine dust through plants have focused on the absorption function rather than the adsorption function of plants and on foliage plants, which are indoor plants, rather than the outdoor plants. In particular, the criterion for selection of fine dust reduction species is not specific, so research on the selection criteria for plant materials for fine dust reduction in urban areas is needed. The purpose of this study is to identify the priorities of eight indicators that affect the fine dust reduction by using the fuzzy multi-criteria decision-making model (MCDM) and establish the tree selection criteria for the urban planting to reduce fine dust. For the purpose, we conducted a questionnaire survey of those who majored in fine dust-related academic fields and those with experience of researching fine dust. A result of the survey showed that the area of leaf and the tree species received the highest score as the factors that affect the fine dust reduction. They were followed by the surface roughness of leaves, tree height, growth rate, complexity of leaves, edge shape of leaves, and bark feature in that order. When selecting the species that have leaves with the coarse surface, it is better to select the trees with wooly, glossy, and waxy layers on the leaves. When considering the shape of the leaves, it is better to select the two-type or three-type leaves and palm-shaped leaves than the single-type leaves and to select the serrated leaves than the smooth edged leaves to increase the surface area for adsorbing fine dust in the air on the surface of the leaves. When considering the characteristics of the bark, it is better to select trees that have cork layers or show or are likely to show the bark loosening or cracks than to select those with lenticel or patterned barks. This study is significant in that it presents the priorities of the selection criteria of plant material based on the visual characteristics that affect the adsorption of fine dust for the planning of planting to reduce fine dust in the urban area. The results of this study can be used as basic data for the selection of trees for plantation planning in the urban area.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.1
• /
• pp.55-64
• /
• 2019

The flowering seasons can be advanced due to climate change that would cause an abnormally warm winter. Such warm winter would increase the frequency of crop damages resulted from sudden occurrences of low temperature before and after the vegetative growth stages, e.g., the period from germination to flowering. The degree and pattern of freezing damage would differ by the development stage of each individual fruit tree even in an orchard. A critical temperature, e.g., killing temperature, has been used to predict freeze damage by low-temperature conditions under the assumption that such damage would be associated with the development stage of a fruit flower bud. However, it would be challenging to apply the critical temperature to a region where spatial variation in temperature would be considerably high. In the present study, a phenological model was used to estimate major bud development stages, which would be useful for prediction of regional risks for the freeze damages. We also derived a linear function to calculate a probabilistic freeze risk in spring, which can quantitatively evaluate the risk level based solely on forecasted weather data. We calculated the dates of freeze damage occurrences and spatial risk distribution according to main production areas by applying the spring freeze risk function to apple, peach, and pear crops in 2018. It was predicted that the most extensive low-temperature associated freeze damage could have occurred on April 8. It was also found that the risk function was useful to identify the main production areas where the greatest damage to a given crop could occur. These results suggest that the freezing damage associated with the occurrence of low-temperature events could decrease providing early warning for growers to respond abnormal weather conditions for their farm.

• Journal of agriculture & life science
• /
• v.53 no.6
• /
• pp.23-33
• /
• 2019

In accordance with a change in the management information system containing the management record and planning for the entire national forest in South Korea by an amendment of the relevant law (The national forest management planning and methods, Korea Forest Service), in this study, average, the maximum, and the minimum values for DBH were presented while only average values were required before the amendment. In this regard, there is a need for an estimation algorithm by which all the existing values for DBH established before the revision can be converted to the highest and the lowest ones. The purpose of this study is to develop an estimation equation to automatically show the minimum and the maximum values for DBH for 12 main tree species from the data in the national forest management information system. In order to develop the estimation equation for the minimum and the maximum values for DBH, there was exploited the 6,858 fixed sample plots of the fifth and the sixth national forest inventory between in 2006 and 2015. Two estimation models were applied for DBH-tree age and DHB-tree height using such growth variables as DBH, tree age, and height, to draw the estimation equation for the maximum and the minimum values for DBH. The findings showed that the most suitable model to estimate the minimum and the maximum values for DBH was Dmin=a+bD+cH, Dmax=a+bD+cH with the variables of DBH and height. Based on these optimal models, the estimation equation was devised for the minimum and the maximum values for DBH for the 12 main tree species.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.6
• /
• pp.135-154
• /
• 2020

This paper analyzes the 5,521 samples of the small and medium-sized businesses(SMBs) obtained from the Korea Credit Guarantee Fund. From January 2014 to September 2019, 85% of the SMBs have 5 or fewer full-time employees. The proportion of SMBs is overwhelmed by the elderly men, and most founders are the CEO. Also, about 87% of the workplace types are rented, while 64% of the CEO's residence types are owner-occupation. 47% of the financial grade score is less than 10 points out of 100 and 80% of SMBs have less than 200 million won of the loan guarantee. In particular, the total guarantee loan amount or the days of net guarantee have significantly positive relations with the working period of the CEO in the same industry, the number of employees, the operation period of SMBs, and the corporate business type. In the case of the financial grading score which has the highest weight in overall credit rating gets higher with the higher number of employees, the longer the operation period, and the corporate business type. However, the quantified non-financial grading score has no significant relationship with other explanatory variables, except for the corporate business type. This implies that a non-financial grade score is measured by other determinants that are not observed by the Korea credit guarantee fund. The pure non-financial grade score has positive relations with the working period of the CEO. Overall, this paper would help Korean SMBs upgrade their credit ratings and expand the money supply when there is no standardized credit rating model or no publicly available evaluation criteria for SMBs. We expect this paper provides important insights for further research and policy-makers for SMBs. In particular, to address the financial needs of thin-filers such as SMBs, technology-based financial services (TechFin) would use alternative data to evaluate the financial capabilities of thin-filers and to develop new financial services.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.1
• /
• pp.55-69
• /
• 2021

For the national economic development, the participation of women in the social and economic activities is crucial. The popularization of start-ups, digital transformation, and WEconomy trends have lowered the barriers to opportunities for women to start a business and provide an environment in which women can grow faster. This paper examines the significance and process of success of women entrepreneurs and the characteristics of innovation strategies and achievements by linking the recently changing business environment of a company, factors influencing the success of women entrepreneurship, and innovation activities. To this end, four companies' cases were analyzed in the fields of distribution/service and consumer products/services, which are areas of large investment among female startups. The result shows that women entrepreneurs recognize the meaning of success as creating and continuing to create a 'corporate value through establishing a trust relationship with customers' within the 'balance between personal life and work.' In terms of the business ecosystem, women entrepreneurs strive for 'business activities based on the win-win growth of consumers, producers and sellers' for success, and rather 'focus on the process with a problem-solving approach' rather than achieving performance-oriented goals. Also through excellent power of observation, flexibility, and execution power, women entrepreneurs conduct business by adapting to changing trends. In terms of innovation activities, the innovation strategy of women-led companies puts priority on 'creating the value customers want' and focuses on innovation in the 'customer-centric business model' rather than technological innovation. As such, women-led companies show several differentiated characteristics, which enable them to create corporate value and achieve sustainable growth. The barriers to challenges and opportunities for women to start a business have been lowered, and an ecosystem has been created for female startups to grow. But why are there still so few women entrepreneurs, and the answer to where we need to close these gaps is ultimately a close analysis and investigation of the field. We must present milestones for growth steps through the accumulation of case studies of women startups that have exited. In addition, women can stand as economic agents only when the policy targets are subdivided and specific approaches to child-rearing and childcare for women entrepreneurs must be taken. This paper expects to serve as basic data for follow-up studies and become the basis of research for women entrepreneurs to grow as economic agents.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.1
• /
• pp.21-28
• /
• 2021

Purpose Brown fat, or brown adipose tissue (BAT), is involved in non-shivering thermogenesis and creates heat through glucose metabolism. BAT activation occurs stochastically by internal factors such as age, sex, and body mass index (BMI) and external factors such as temperature and environment. In this study, as a retrospective, electronic medical record (EMR) observation study, statistical analysis is conducted to confirm BAT activation and various factors. Materials and Methods From January 2018 to December 2019, EMR of patients who underwent PET/CT scan at the National Cancer Center for two years were collected, a total of 9155 patients were extracted, and 13442 case data including duplicate scan were targeted. After performing a univariable logistic regression analysis to determine whether BAT activation is affected by the environment (outdoor temperature) and the patient's condition (BMI, cancer type, sex, and age), A multivariable regression model that affects BAT activation was finally analyzed by selecting univariable factors with P<0.1. Results BAT activation occurred in 93 cases (0.7%). According to the results of univariable logistic regression analysis, the likelihood of BAT activation was increased in patients under 50 years old (P<0.001), in females (P<0.001), in lower outdoor temperature below 14.5℃ (P<0.001), in lower BMI (P<0.001) and in patients who had a injection before 12:30 PM (P<0.001). It decreased in higher BMI (P<0.001) and in patients diagnosed with lung cancer (P<0.05) In multivariable results, BAT activation was significantly increased in patients under 50 years (P<0.001), in females (P<0.001) and in lower outdoor temperature below 14.5℃ (P<0.001). It was significantly decreased in higher BMI (P<0.05). Conclusion A retrospective study of factors affecting BAT activation in patients who underwent PET/CT scan for 2 years at the National Cancer Center was conducted. The results confirmed that BAT was significantly activated in normal-weight women under 50 years old who underwent PET/CT scan in weather with an outdoor temperature of less than 14.5℃. Based on this result, the patient applied to the factor can be identified in advance, and it is thought that it will help to reduce BAT activation through several studies in the future.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.56-65
• /
• 2022

Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.