• Journal of Korea Water Resources Association
• /
• v.51 no.1
• /
• pp.11-18
• /
• 2018

The climate change impacts on hydrological components and water balance in Jeju Island were evaluated using multiple climate models and watershed model, SWAT-K. To take into account the uncertainty of the future forecast data according to climate models, climate data of 9 GCMs were utilized as weather data of SWAT-K for future period (2010-2099). Using the modeling results of the past (1992-2013) and the future period, the hydrological changes of each year were analyzed and the precipitation, runoff, evapotranspiration and recharge were increasing. Compared with the past, the change in the runoff was the largest (up to 50% increase) and the evapotranspiration was relatively small (up to 11% increase). Monthly results show that the amount of evapotranspiration and the amount of recharge are greatly increased as the amount of precipitation increases in August and September, while the amount of evapotranspiration decreases in the same period. January and December showed the opposite tendency. As a result of analyzing future water balance changes, the ratio of runoff, evapotranspiration, and recharge to rainfall did not change much, but compared to the past, the runoff rate increased up to 4.3% in the RCP 8.5 scenario, while the evapotranspiration rate decreased by up to 3.5%. Based on the results of other researchers and this study, it is expected that rainfall and runoff will increase gradually in the future under the assumption of present climate change scenarios. Especially summer precipitation and runoff are expected to increase. As a result, the amount of groundwater recharge in Jeju Island will increase.

• Journal of Korea Water Resources Association
• /
• v.54 no.12
• /
• pp.1243-1254
• /
• 2021

For water resources operation or agricultural water management, it is important to accurately predict evapotranspiration for a long-term future over a seasonal or monthly basis. In this study, reference evapotranspiration forecast (up to 12 months in advance) was performed using statistically predicted monthly temperatures and temperature-based Hamon method for the Han River basin. First, the daily maximum and minimum temperature data for 15 meterological stations in the basin were derived by spatial-temporal downscaling the monthly temperature forecasts. The results of goodness-of-fit test for the downscaled temperature data at each site showed that the percent bias (PBIAS) ranged from 1.3 to 6.9%, the ratio of the root mean square error to the standard deviation of the observations (RSR) ranged from 0.22 to 0.27, the Nash-Sutcliffe efficiency (NSE) ranged from 0.93 to 0.95, and the Pearson correlation coefficient (r) ranged from 0.97 to 0.98 for the monthly average daily maximum temperature. And for the monthly average daily minimum temperature, PBIAS was 7.8 to 44.7%, RSR was 0.21 to 0.25, NSE was 0.94 to 0.96, and r was 0.98 to 0.99. The difference by site was not large, and the downscaled results were similar to the observations. In the results of comparing the forecasted reference evapotranspiration calculated using the downscaled data with the observed values for the entire region, PBIAS was 2.2 to 5.4%, RSR was 0.21 to 0.28, NSE was 0.92 to 0.96, and r was 0.96 to 0.98, indicating a very high fit. Due to the characteristics of the statistical models and uncertainty in the downscaling process, the predicted reference evapotranspiration may slightly deviate from the observed value in some periods when temperatures completely different from the past are observed. However, considering that it is a forecast result for the future period, it will be sufficiently useful as information for the evaluation or operation of water resources in the future.

• The Journal of Bigdata
• /
• v.3 no.2
• /
• pp.87-99
• /
• 2018

This study analyze the factors affecting the number of bidders in public contracts by collecting contract data such as purchase of goods, service and facility construction through KONEPS among various forms of public contracts. The reason why the number of bidders is important in public contracts is that it can be a minimum criterion for judging whether to enter into a rational contract through fair competition and is closely related to the budget reduction of the ordering organization or the profitability of the bidders. The purpose of this study is to analyze the factors that determine the participation of bidders in public contracts and to present the problems and policy implications of bidders' participation in public contracts. This research distinguishes the existing sampling based research by analyzing and analyzing many contracts such as purchasing, service and facility construction of 4.35 million items in which 50,000 public institutions have been placed as national markets and 300,000 individual companies and corporations participated. As a research model, the number of announcement days, budget amount, contract method and winning bid is used as independent variables and the number of bidders is used as a dependent variable. Big data and multidimensional analysis techniques are used for survey analysis. The conclusions are as follows: First, the larger the budget amount of public works projects, the smaller the number of participants. Second, in the contract method, restricted competition has more participants than general competition. Third, the duration of bidding notice did not significantly affect the number of bidders. Fourth, in the winning bid method, the qualification examination bidding system has more bidders than the lowest bidding system.

• Journal of Korea Water Resources Association
• /
• v.55 no.6
• /
• pp.393-404
• /
• 2022

Reliable terrestrial rainfall observations from satellites at finer spatial resolution are essential for urban hydrological and microscale agricultural demands. Although various traditional "top-down" approach-based satellite rainfall products were widely used, they are limited in spatial resolution. This study aims to assess the potential of a novel "bottom-up" approach for rainfall estimation, the parameterized SM2RAIN model, applied to the C-band SAR Sentinel-1 satellite data (SM2RAIN-S1), to generate high-spatial-resolution terrestrial rainfall estimates (0.01° grid/6-day) over Central South Korea. Its performance was evaluated for both spatial and temporal variability using the respective rainfall data from a conventional reanalysis product and rain gauge network for a 1-year period over two different sub-regions in Central South Korea-the mixed forest-dominated, middle sub-region and cropland-dominated, west coast sub-region. Evaluation results indicated that the SM2RAIN-S1 product can capture general rainfall patterns in Central South Korea, and hold potential for high-spatial-resolution rainfall measurement over the local scale with different land covers, while less biased rainfall estimates against rain gauge observations were provided. Moreover, the SM2RAIN-S1 rainfall product was better in mixed forests considering the Pearson's correlation coefficient (R = 0.69), implying the suitability of 6-day SM2RAIN-S1 data in capturing the temporal dynamics of soil moisture and rainfall in mixed forests. However, in terms of RMSE and Bias, better performance was obtained with the SM2RAIN-S1 rainfall product over croplands rather than mixed forests, indicating that larger errors induced by high evapotranspiration losses (especially in mixed forests) need to be included in further improvement of the SM2RAIN.

• Journal of Korean Home Economics Education Association
• /
• v.35 no.1
• /
• pp.1-14
• /
• 2023

The objective of the study was to examine the associations of dietary carbohydrate and fat intake with the prevalence of metabolic syndrome in Korean women. A cross-sectional study was employed based on data from the Korea National Health and Nutrition Examination (2007-2016). A total of 22,850 women aged 19 to 69 years were studied after excluding responses from pregnant or lactating women and those with missing metabolic values. Dietary intake data were collected with a 24-hour recall method. Dietary carbohydrate and fat intakes were divided into quintiles. After controlling for confounding variables, a multivariable logistic regression and general linear model were used. The findings indicated that HDL cholesterol levels were lower (p for trend<0.01), while triglyceride levels (p for trend=0.04), waist circumference (p for trend<0.01), and systolic blood pressure (p for trend<0.01) were higher among participants in the highest quintile of carbohydrate intake compared to those in the lowest quintile. Participants in the highest quintile of fat intake had lower waist circumference (p for trend=0.02), triglyceride level (p for trend<0.01), and systolic blood pressure (p for trend<0.01), while higher HDL cholesterol level (p for trend<0.01) compared to those in the lowest fat intake quintile. Metabolic syndrome was more likely to be present in the highest quintile of carbohydrates intake than in the lowest quintile (5^th quintile vs. 1^st quintile, OR: 1.32; 95% CI: 1.11 to 1.57). However, metabolic syndrome was less likely to be present in the highest quintile of fat intake than in the lowest quintile (5^th quintile vs. 1^st quintile, OR: 0.73; 95% CI: 0.61 to 0.86). This study revealed that high dietary carbohydrate intake and low dietary fat intake were associated with metabolic syndrome in Korean women.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.103-119
• /
• 2023

Since the Korean government has decided to apply the policy of BIM (Building Information Modeling) to the entire construction industry, it has experienced a positive trend in adoption and utilization. BIM can reduce workloads by building model objects into libraries that conform to standards and enable consistent quality, data integrity, and compatibility. In the domestic architecture, civil engineering, and the overseas landscape architecture sectors, many BIM library standardization studies have been conducted, and guidelines have been established based on them. Currently, basic research and attempts to introduce BIM are being made in Korean landscape architecture field, but the diffusion has been delayed due to difficulties in application. This can be addressed by enhancing the efficiency of BIM work using standardized libraries. Therefore, this study aims to provide a starting point for discussions and present a classification system for objects and attribute information that can be referred to when creating landscape libraries in practice. The standardization of landscape BIM library was explored from two directions: object classification and attribute information items. First, the Korean construction information classification system, product inventory classification system, landscape design and construction standards, and BIM object classification of the NLA (Norwegian Association of Landscape Architects) were referred to classify landscape objects. As a result, the objects were divided into 12 subcategories, including 'trees', 'shrubs', 'ground cover and others', 'outdoor installation', 'outdoor lighting facility', 'stairs and ramp', 'outdoor wall', 'outdoor structure', 'pavement', 'curb', 'irrigation', and 'drainage' under five major categories: 'landscape plant', 'landscape facility', 'landscape structure', 'landscape pavement', and 'irrigation and drainage'. Next, the attribute information for the objects was extracted and structured. To do this, the common attribute information items of the KBIMS (Korean BIM Standard) were included, and the object attribute information items that vary according to the type of objects were included by referring to the PDT (Product Data Template) of the LI (UK Landscape Institute). As a result, the common attributes included information on 'identification', 'distribution', 'classification', and 'manufacture and supply' information, while the object attributes included information on 'naming', 'specifications', 'installation or construction', 'performance', 'sustainability', and 'operations and maintenance'. The significance of this study lies in establishing the foundation for the introduction of landscape BIM through the standardization of library objects, which will enhance the efficiency of modeling tasks and improve the data consistency of BIM models across various disciplines in the construction industry.

• Korean small business review
• /
• v.41 no.4
• /
• pp.1-36
• /
• 2019

The purpose of this study is to identify the relationships among purposes and contents of smart factory building and continuous utilization of smart factory. Specifically, this study identifies two types of purposes of smart factory building as follows: (1) improving productivity, (2) increasing flexibility. In this study, three aspects of smart factory building contents were suggested like this: (1) automation area (facility automation vs. work automation), (2) big data system focus (radical transformation vs. incremental improvement), and (3) value chain integration area (internal value chain integration vs. external value chain integration). In addition, we looked at how firm size moderates the purposes - contents - continuous utilization of smart factory relationship. A questionnaire survey was conducted on 151 manufacturing companies. More specifically, out of 151 companies, 100 are small-and-medium-sized enterprises and 51 large-sized enterprises. All questionnaires were targeted at companies with Smart Factory level above level 2. The analysis results of this study using Smart PLS statistical programs are as follows. First, the purposes of smart factory building including increasing productivity and flexibility had positive impacts on all of the contents of smart factory building. Second, all of smart factory building contents had positive impacts on the continuous use of smart factory except big data system for incremental improvement of manufacturing process. Third, the impacts of smart factory building purposes implementation on smart factory building contents varied depending on whether the purpose is productivity improvement or flexibility. Fourth, it was founded that firm size moderated the relationships of purposes - contents - continuous utilization of smart factory in such a way that large-sized firms tend to empathize the link between flexibility and smart factory building contents for continuous use of smart factory, while small-and-medium-sized-firms emphasizing the link between productivity and smart factory building contents. Most of the previous studies have focused on presenting current smart factory deployment cases. However, it is believed that this research has made a theoretical contribution in this field in that it established and verified a research model for the smart factory building strategy. Based on the findings from a working-level perspective, corporate practitioners also need to have a different approach to smart factory building, which should be emphasized depending on whether their purpose of building smart factory is to increase productivity or flexibility. In particular, since the results of this study identify the moderating effect of firm size, it is deemed necessary for firms to implement a smart factory building strategy suitable for their firm size.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.62-73
• /
• 2008

In this paper, domestic standard revision plan of dynamic frequency method which is used both in unmanned automatic toll collection system and manned collection system of the express highway is presented. For such ETCS, the infrared rays (870 nm) of active frequency method and the frequency integrated method (5.8 GHz) are adopted and extended to be operated to the all around the Toll Gate. This standardization plan is based on inter connection reference model between OSI (Open System Interconnection) in process of ITS short range radio communication standardization of 5.8 GHz bandwidth to support traffic information and control system service, and the derived revision plan by starting from physical layer which support interoperability for multiple access between RSE (Road Side Equipment) and OBE (On Board Equipment), in which is categorized into physical layer, data link layer, and application layer. In case of radiation power, existing standard is divided by class1 (within 10 m) and Class2 (within 100 m) according to transmission lengthwhile it is operated with just single standard 'Class1' because of notification of Ministry of Information and Communication in 2004. In the case of the limitation value of incident power in communication area, considering operation plan of ETCS that is on actuality operation the measurements are reflected to the standard. In other wort this paper proposed the improvement standard of incident power, pseudo response in the communication area and radiated power in order to secure stability and compatibility among operator systems about the needed part on ETCS operation.

• Korea Journal of Hospital Management
• /
• v.8 no.3
• /
• pp.143-160
• /
• 2003

Due to the dramatic and situational change in medical industry, it has became very important to keep existing patients and to attract new patients by monitoring the medical consumer's expectation and various needs and ensuring the patients' satisfaction. This study regards the patients' satisfaction as the final object of medical service. So the object of this study is to provide useful data for the decision making and medical service marketing by exploring the problems generated by the cognition difference for the medical service between inpatients and outpatients, by responding for the problems and by examining the relationship between the satisfaction with the medical service and revisiting. To achieve the object of this study, literature research and empirical analysis were used. I establish the research model based on the existing service marketing and some hypotheses were chosen for the empirical analysis. As a result of empirical analysis for the five hypotheses, two hypotheses were chosen. First, there was cognition difference about accessibility and convenience between inpatient and outpatient. I guess that the satisfaction degree of inpatient is higher than the outpatient because the inpatient has the reliability for the hospital and determines the hospitalization or emergent coming to hospital. Second, the fifth hypothesis, "the satisfaction of patient will influence the revisiting." was chosen. The hypothesis is not only coincident with existing scholars and studies but also it provides the meaningful points for medical service marketing. The result shows that the parties concerned with hospital management should endeavor for the patient satisfaction in medical service, and that hospital management should be medical consumer centered. To measure the quality of medical service, the cognition differences for accessibility, convenience, physical environment, and human service were evaluated and the result shows that the cognition difference for the accessibility and convenience was outstanding. The analysis shows that there was cognition difference in the four categories among six subcategories in the human service -- the attitude of medical technologist, the attitude of doctor, the length of time for doctor's diagnosis for the patient and doctor's explanation. Therefore, I think that further study is required for the cause analysis for service categories which have cognition difference between inpatient and outpatient. I think the result will be very useful. Through this study, the relationship between patient satisfaction with the medical service and revisiting was verified. And it suggests that, to face the changing medical environment actively and to improve the quality of medical service, marketing strategy should be focused not on medical service providers but on medical service consumers and that the further studies for the medical consumer should be continued.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4B
• /
• pp.243-251
• /
• 2012

To investigate the characteristics of rip current occurring at Haeundae beach, observations obtained from a buoy and a CCTV were analyzed and numerical experiments were conducted. During observed rip-current events, the CCTV images showed that a couple of wave-trains, which are close to regular waves with slightly different directions, propagated to the beach, and wavelet analyses of data from the buoy showed very narrow-banded spectra with a peak frequency. From the evidences, it was inferred that a known mechanism of generating rip current due to the nodal line area of honeycomb-patterned wave crest was one of the significant factors of rip current occurrences of Haeundae beach. The mechanism has been explained by the following: When two wave-trains with slightly different directions propagate to a beach, wave crests of the incident wave-trains form honeycomb pattern due to nonlinear interaction. The nodal lines of honeycomb pattern are developed in the cross-shore direction. And longshore currents flow toward the nodal line area which has very low wave energy. Consequently their mass flux is expelled through the area toward the sea direction. To confirm the generation, numerical experiments were performed using a nonlinear Boussinesq equation model. In the cases with two incident wave-trains with slightly different directions and with a monochromatic wave propagating over a submerged shoal, it was seen that the honeycomb pattern of wave crests was well developed, and thus rip currents were evolved along the nodal lines.