• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.127-136
• /
• 2022

As manufacturing items have changed in various ways, changes in the mass production of small-scale small-scale production of multiple varieties have become commonplace. As a result, the method of the manufacturing site has also changed, and the "smart factory," which emphasizes the production efficiency aspect using automation lines and big data of factories, is in the spotlight according to the global market economy. The introduction performance of smart factories has a positive effect in terms of production efficiency and is drawing a steep upward curve. In addition to the positive aspects, the aspect that needs to be supplemented in the future is the support and cooperation of specialized smart equipment suppliers, but education on standardized smart factories and the relocation of existing manpower, education, evaluation, and creative production that robots cannot replace Various support measures are also needed for activities. In addition, continuous management and systematic education are required to enter the upper stage. Through the case of companies that have built smart factories, it is intended to emphasize the need for proper use of manpower and support management for settlement and maintenance after introduction and continuous on-the-job training through the comparison of productivity before and after introduction to ensure the effect continues.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3C
• /
• pp.201-207
• /
• 2006

Soil tests are generally conducted using a membrane to measure a pore water pressure. However, it has also been recognized that the membrane penetrates into the specimen by the change of the confining pressure, and it results in the erroneous measurement in the pore water pressure and the volumetric strain. This study examined the effectiveness of the correction equation of the membrane penetration on the basis of the experimental data acquired during the isotropic unloading and the cyclic shear process using the hollow cylindrical shear test equipment. The results showed that the membrane penetration by the correction equation could be overestimated when the mean effective stress was lower than 20kPa in this study. The limitations originated from the sudden increase near the zero effective stress, and in order to prevent the overestimation in low effective stress condition, the use of the constant a was proposed in this study. Furthermore, the correction equation for the membrane penetration had to be applied carefully when the initial relative density was high and the density changes were occurred by the relocation of the soil particle by the liquefaction.

• 한국노년학
• /
• v.29 no.2
• /
• pp.477-488
• /
• 2009

Purpose: This study was conducted to investigate newly admitted nursing home resident's experience and adjustment problems in the early stage of institutionalization. Method: In depth interviews was done on 6 elderly residents who were newly admitted. Data from the interview were analyzed using theme analysis method. Results: Results showed that reasons for Institution admission were decreasing physical health and cognitive functioning. Residents reported that difficulties they experienced in institution life were lack of individualized care, loss of autonomy and privacy associated with the demands of group living, and loss of control over activities of daily living. Conclusion: Efforts need to be made to maintain the residents' decision-making and autonomy. Listening intentionally, offering choices, and promoting personal identity might be utilized to reduce relocation stress and enhance adaptation to nursing home living.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.1-16
• /
• 2023

In 2005, the selection of 10 innovation cities was completed, and since 2013, public institutions began relocating to innovation cities. As a policy aimed at promoting balanced regional development, there were significant expectations from the regions. However, although the population moving to innovation cities has increased, it remains to be seen how much inflow is from the capital region and what spatial characteristics exist nationwide. Therefore, this study aims to analyze whether the innovation cities are fulfilling their roles by examining the patterns of inflow from the capital region and the spatial characteristics, and to reassess the policy direction for future innovation cities. We utilized the Microdata Integrated Service (MDIS) provided by Statistics Korea from 2013 to 2021. For the data collection reasons, we focused on analyzing the three cities. The results showed that in the initial stages of innovation city development, there was a significant influx of population from the capital region, leading to some effects on population dispersion and balanced regional development. However, over time, a phenomenon emerged where more people started to move back to the capital region, indicating a problematic trend. Furthermore, the Gyeongbuk Innovation City and Gwangju-Jeonnam Innovation City showed similarities in terms of reasons for migration, age of householder, and number of household members. However, the Gyeongnam Innovation City exhibited distinct characteristics compared to the other two cities. While the reasons for this phenomenon may be diverse, the current situation suggests that the goal of achieving "balanced national development" has reached its limits. Therefore, urgent measures need to be taken for improvement that take regional characteristics into account. Furthermore, in designing the second phase of the public institution relocation plan is required to avoid repeating the same issues and ensure a more thoughtful approach.

• Journal of Intelligence and Information Systems
• /
• v.29 no.1
• /
• pp.79-105
• /
• 2023

Due to unprecedented extreme weather events such as global warming and climate change, many parts of the world suffer from severe pain, and economic losses are also snowballing. In order to address these problems, 'The Paris Agreement' was signed in 2016, and an intergovernmental consultative body was formed to keep the average temperature rise of the Earth below 1.5℃. Korea also declared 'Carbon Neutrality in 2050' to prevent climate catastrophe. In particular, it was found that the increase in temperature caused by greenhouse gas emissions hurts the environment and society as a whole, as well as the export-dependent economy of Korea. In addition, as the diversification of transportation types is accelerating, the change in means of choice is also increasing. As the development paradigm in the low-growth era changes to urban regeneration, interest in idle railway sites is rising due to reduced demand for routes, improvement of alignment, and relocation of urban railways. Meanwhile, it is possible to partially achieve the solar power generation goal of 'Renewable Energy 3020' by utilizing already developed but idle railway sites and take advantage of being free from environmental damage and resident acceptance issues surrounding the location; but the actual use and plan for these solar power facilities are still lacking. Therefore, in this study, using the big data provided by the Korea National Railway and the Renewable Energy Cloud Platform, we develop an algorithm to discover and analyze suitable idle sites where solar power generation facilities can be installed and identify potentially applicable areas considering conditions desired by users. By searching and deriving these idle but relevant sites, it is intended to devise a plan to save enormous costs for facilities or expansion in the early stages of development. This study uses various cluster analyses to develop an optimal algorithm that can derive solar power plant locations on idle railway sites and, as a result, suggests 202 'actively recommended areas.' These results would help decision-makers make rational decisions from the viewpoint of simultaneously considering the economy and the environment.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.72-94
• /
• 2022

This study is about the architectural changes over time in Dongchun-gotaek, the house of Song Jun-gil, one of the representative figures of the Hoseosarim(湖西士林), also an architectural cultural asset representing Daejeon. Data related to Sangryang(上樑) found in the restoration process of Dongchundang(同春堂) and DongchundangJongtaek(同春堂 宗宅), the state designated heritage application report written by Daejeon Metropolitan City, Deokeun-gaseung(德恩家乘), a book which has been handed down from generation to generation from Dongchundang Munjeonggongpa(同春堂 文正公派) of Eunjin Song's Clan and the results of partial excavation surveys respectively conducted in 2010 and 2020 were used as basic research data, and these data were compared and analyzed to examine the changes of the arrangement of Dongchundang, Jeongchim(正寢), and ancestral shrine buildings. Dongchundang was built by Song Jun-Gil. Rather than a new building, it was a building that was basically relocated to its current area when Cheongjwawa(淸坐窩), which was built by his father, dilapidated, and the timing of its construction can be clarified through Sangryangmun(上樑文). However, in the estimated area of Cheongjwawa, no exact site was found in two surveys of buried cultural heritages. In the case of Jeongchim, it was possible to confirm that it had been relocated two times, and it can be said that the biggest achievement of this study was to confirm that the first relocation was outside the current fence. In addition, one of the building sites which was identified in the excavation survey for confirming the servants' quarters was estimated to be the first construction at the site of Dongchun-gotaek. In the shrine area, there were the first constructed Gamyo(家廟), including Byeolmyo(別廟) dedicated to Bulcheonwi(不遷位), and Jomyo(祧廟) dedicated to Checheon(遞遷), and it can be seen that it was a space where many changes such as new construction, demolition, or mutual exchange of location occurred over time. The present buildings arrangement through these processes was not far from the original plan of Song Joon-gil. Therefore, the name of 'Dongchun-gotaek' is appropriate.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.47-56
• /
• 2014

Recently, the velocity of sea-level rising has increased due to the global warming and the natural disasters have been occurred many times. Therefore, there are various demands for the integration of vertical reference datums for the ocean and land areas in order to develop a coastal area and prevent a natural disaster. Currently, the vertical datum for the ocean area refers to Local Mean Sea Level(LMSL) and the vertical datum for the land area is based on Incheon Mean Sea Level(IMSL). This study uses 31 points of Tidal Gauge Bench Mark (TGBM) in order to compares and analyzes the geometric heights referring LMSL, IMSL, and the nationally determined geoid surface. 11 points of comparable data are biased more than 10 cm when the geometric heights are compared. It seems to be caused by the inflow of river, the relocation of Tidal Gauge Station, and the topographic change by harbor construction. Also, this study analyze the inclination of sea surface which is the difference between IMSL and LMSL, and it shows the inclination of sea surface increases from the western to southern, and eastern seas. In this study, it is shown that TGBM can be used to integrate vertical datums for the ocean and land areas. In order to integrate the vertical datums, there need more surveying data connecting the ocean to the land area, also cooperation between Korea Hydrographic and Oceanographic Administration and National Geographic Information Institute. It is expected that the integrated vertical datum can be applied to the development of coastal area and the preventative of natural disaster.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.2
• /
• pp.23-35
• /
• 2024

This study analyzed the correlation between each of the 12 influencing factors in FAR 16.04 and the decision-making process for construction contract types, using data from a total of 2,406 DoD Construction Acquisitions spanning from 2008 to 2022. The study considered 12 independent variables, grouped into 4 Characteristics with 3 factors each. Meanwhile, all other contract types were categorized into two types: Firm-Fixed-Price (FFP) and Cost-Reimbursement Contract (CRC), which served as the dependent variables. The findings revealed that FFP contracts significantly dominated in terms of acquisition volume. In line with prevailing beliefs, logistic data analysis and Analytical Hierarchy Process (AHP) analysis of Relative Weights from Experts' Survey demonstrated that independent variables like Uncertainty of the Scope of Work and Complexity found out to be increasing the likelihood of selecting CRC. The number of contractors in the market does indeed influence the possibilities of contract decision-making between CRC and FFP. Meanwhile, the p-values of the top 3 influencing factors on CRC from the AHP analysis-namely, Appropriateness of CAS, Project Urgency, and Cost Analysis-exceeded 0.05 in the binominal regression results, rendering it inconclusive whether they significantly influenced the construction contract type decision, particularly with respect to payment methods. This outcome partly results from the fact that a majority of respondents possessed specific experiences related to the USFK relocation project. Furthermore, influencing factors in construction projects behave differently than common beliefs suggest. As a result, it is imperative to consider the 12 influencing factors categorized into 4 Characteristics areas before establishing acquisition strategies for targeted construction projects.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.143-156
• /
• 2014

We reviewed investigation status on turbidity plume in the statement of marine environmental survey(2008 to 2012) associated with marine sand extraction projects. The survey statement from seven marine sand extraction sites (extraction area of Southern EEZ, extraction area of Western EEZ, relocation zone in the Western EEZ, sea area under jurisdiction of Taean-gun, sea area under jurisdiction of Ansan City, and two discrete sea areas under jurisdiction of Ongjin-gun) in the nearshore and offshore of Korea showed that in situ observations were carried out for the dispersion and transport of suspended sediments on two areas (One is a extraction area in the EEZs, the other is an area of coastal sites). However, sampling station and range have not been selected considering physical, geographical factors (tide, wave, stratification, water depth, etc.) and weather conditions (wind direction and velocity, fetch, duration, etc). Especially turbidity plumes originating from three sources, which include suspended sediments in overflow(or overspill) discharged from spillways and reject chutes of dredging vessel, and resuspended sediments from draghead at the seabed, may be transported to a far greater distance outside the boundary of the extraction site and have undesirable impacts on the marine environment and ecosystem. We address that behaviour of environmental pollutants such as suspended solids, nutrients, and metals should be extensively monitored and diagnosed during the dispersion and transport of the plume. Finally we suggest the necessity to supplement the current system of the sea area utilization consultation and establish the combined guidelines on marine sand extraction to collect basic data, to monitor cumulative effects, and to minimize environmental damages incurred by the aftermath of sand extraction.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.1
• /
• pp.10-19
• /
• 2021

This study investigated the actual state and transformation of the major garden ornaments in Changdeokgung Palace(昌德宮) in the modern and contemporary period, focusing on Nakseonjae(樂善齋), Juhamnu(宙合樓), Jondeokjeong(尊德亭), and Daebodanji (大報壇址). This study can be used as useful data for establishing the restoration and maintenance plan of the garden ornaments in Changdeokgung Palace, and the main results of the study can be summarized as follows. First, according to a photo taken by the Czech Vráz, in 1901, a total of six garden ornaments, including a stone pond and odd-shaped stones, were located in the backyard of Nakseonjae. Since liberation, arbitrary relocation of garden ornaments has frequently occurred, and in the process, two odd-shaped stones, originally located on the first floor of the terraced flower bed, have been transferred to the backyard of Gyeonghungak(景薰閣). Second, unlike the late Joseon Dynasty when 「Donggwoldo(東闕圖)」 was produced, odd-shaped stones were arranged symmetrically in the backyard of Juhamnu in the early 1900s. It was a traditional style garden ornament with similar appearance, size, and design. However, all the odd-shaped stones in the backyard of Juhaumnu were relocated to other places in the 1970s and 1980s. One is located at the rear of Aeryeonjeong(愛蓮亭) through the entrance of Bingcheon(氷泉) and the vicinity of Geumcheongyo(錦川橋), and the other remains in front of the Yeongyeongdang Jangnakmun(演慶堂 長樂門). Third, among the garden ornaments located in the area of Jondeokjeong in the past, one odd-shaped stone is now relocated around the stone bridge near the pavilion and the Yeonghwadang(暎花堂) with its components separated. The bondstone near Yeonghwadang was relocated in 1990 for the purpose of installing an imitation of Angbuilgu(仰釜日晷). Another odd-shaped stone has been relocated to the front door of the Secret Garden(後苑), and now it is difficult to grasp the location. Fourth, the two bondstones remaining in the Daebodanji were actually building materials that were used as the foundation stone for the entrance pillars of the Yi Royal Office Building(李王職廳舍) during the Japanese colonial period. After liberation, the Yi Royal Office Building was reorganized into Imperial Estate Administration Office(皇室財産事務總局), and when the office building was burned down in 1960, the stone statues and foundation stones placed on the stylobate were relocated to the Daebodanji. The bondstone at Daebodanji is a representative example of construction materiasl being mistaken for gaeden ornaments.