• Annual Conference of KIPS
• /
• 2017.04a
• /
• pp.540-543
• /
• 2017

It will be possible to solve some of the major issues in our society and economy with the emerging Big Data used across 21st century global digital economy. One of the main areas where big data can be quite useful is the medical and health area. IT technology is being used extensively in this area and expected to expand its application field further. However, there is still room for improvement in the usage of Big Data as it is difficult to search unstructured data contained in Big Data and collect statistics for them. This limits wider application of Big Data. Depending on data collection and analysis method, the results from a Big Data can be varied. Some of them could be positive or negative so that it is essential that Big Data should be handled adequately and appropriately adapting to a purpose. Therefore, a Big Data has been constructed in this study to applying Crawling technique for data mining and analyzed with R. Also, the data were visualized for easier recognition and this was effective in developing an individualized health plan from different angles.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.1
• /
• pp.13-18
• /
• 2008

Purpose: The image processing method due to the algorism which is various portion nuclear medical image decision is important it makes holds. The purpose of this study is it applies hereupon new image processing method SIEMENS (made by Pixon co.) Onco. flash processing reconstruction and the comparison which use the image control technique of existing the clinical usefulness it analyzes with it evaluates. Materials & Methods: 1. Whole body bone scan-scan speed 20 cm/min, 30 cm/min & 40 cm/min blinding test 2. Bone static spot scan-regional view 200 kcts, 400 kcts for chest, pelvis, foot blinding test 3. 4 quadrant-bar phantom-20000 kcts visual evaluation 4. LSF-FWHM resolution comparison ananysis. Results: 1. Raw data (20 cm/min) & processing data (30 cm/min)-similar level image quality 2. Low count static image-image quality clearly improved at visual evaluation result. 3. Visual evaluation by quadrant bar phantom-rising image quality level 4. Resolution comparison evaluation (FWHM)-same difference from resolution comparison evaluation Conclusion: The study which applies a new method Onco. flash processing reconstruction, it will be able to confirm the image quality improvement which until high level is clearer the case which applies the method of existing better than. The new reconstruction improves the resolution & reduces the noise. This enhances the diagnostic capabilities of such imagery for radiologists and physicians and allows a reduction in radiation dosage for the same image quality. Like this fact, rising of equipment availability & shortening the patient waiting move & from viewpoint of the active defense against radiation currently becomes feed with the fact that it will be the useful result propriety which is sufficient in clinical NM.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.4
• /
• pp.1120-1128
• /
• 1999

The model-based object recognition is defined as a graph matching process between model images and an input image. In this paper, a graph matching problem is modeled as a n optimization problems and a genetic algorithm is proposed to solve the problems. For this work, fitness function, data structured and genetic operators are developed The simulation results are shown that the proposed genetic algorithm can match feature points between model image and input image for recognition of partially occluded two-dimensional objects. The performance fo the proposed technique is compare with that of a neural network technique.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.8 s.173
• /
• pp.182-191
• /
• 2005

It is very important to obtain a high quality of bone image for an accurate ultrasonic measurement of bone mineral density. In this study, we suggested a technique to acquire an optimal image by adapting an acoustic lens and a properly selected ultrasonic probe. Also, we have applied an image processing algorithm with which automatically makes a decision of brightness and contrast of image by generating threshold level, a composition of ultrasonic data, an elimination of noise using modified median filter, and a real time interpolation. We could confirm much improved resolution of bone image with acoustic lens attached to the ultrasonic probe and with the image processing algorithm suggested in this study. Therefore, it became possible to precisely diagnose the osteoprosis using ultrasonic imaging technique.

• Journal of Mechanical Science and Technology
• /
• v.14 no.10
• /
• pp.1104-1113
• /
• 2000

This paper proposes an efficient reverse engineering technique for compound surfaces using a boundary detection method. This approach consists in extracting geometric edge information using a vision system, which can be used in order to drastically reduce geometric errors in the vicinity of compound surface boundaries. Through the image-processing technique and the interpolation process, boundaries are reconstructed by either analytic curves (e. g. circle, ellipse, line) or parametric curves (B-spline curve). In other regions, except boundaries, geometric data are acquired on CMM as points inspected using a touch type probe, and then they are interpolated on several surfaces using a B-spline skinning method. Finally, the boundary edge and the skinned surfaces are combined to reconstruct the final compound surface. Through simulations and experimental works, the effectiveness of the proposed method is confirmed.

• The Journal of the Korea Contents Association
• /
• v.10 no.1
• /
• pp.114-121
• /
• 2010

Based on a complex event processing technique, an abuse pattern monitoring method is developed to provide an real-time detection. CEP is a technique to find complex event pattern in a massive information system. In this study, the events occurred by game-play are observed to be against the rules using CEP. User abuse patterns are pre-registered in CEP engine. And CEP engine monitors user abuse after aggregating the game data transferred by game logging server.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.1
• /
• pp.13-19
• /
• 1995

An experimental investigation has been made for flow in a circular cylinder with a rotating bottom disk. Flow system considered in this paper is a characteristic model of interior flows of an electric washing machine. Flows in a tub of an electric washing machine are driven by a rotating bottom disk called a pulsator. The simple and characteristic model was composed of a circular cylinder with impulsively rotating endwall disk and a viscous fluid in it. Rotational motion of the pulsator is periodic and alternative in rotation direction. The flow field in the interior region is governed by a horizontal boundary layer forms on the impulsively rotating disk. Experimental approach was accomplished by adopting an image processing technique for velocity measurements. Comprehensive details of the flow structure are presented. Also a meridional circulation is obtained by tracking image particles suspended in the fluid. Flow structure and data are successfully procured for this complex rotating flow field.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.3
• /
• pp.409-417
• /
• 1994

In extracting contours from elevation matrix, the most important problem is to solve the degenerate case where four cross point arise in a grid. This paper describes a technique which performs the checking of degenerate case and determination of next point simultaneously. It requires minimum number of array indexing. Also this paper proposes a technique which reduces the number of array indexing by using LOWER/HIGHER information of a cross point designated according to height difference of grid vertices. In addition, we describe a data structure which is proper for representing cross points and tracing them.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5S
• /
• pp.1599-1608
• /
• 2000

Automated collaborative filtering is on the verge of becoming a popular technique to reduce overloaded information as well as to solve the problems that content-based information filtering systems cannot handle. In this paper, we describe three different algorithms that perform collaborative filtering: GroupLens that is th traditional technique; Best N, the modified one; and an algorithm that uses clustering. Based on the exeprimental results using real data, the algorithm using clustering is compared with the existing representative collaborative filtering agent algorithms such as GroupLens and Best N. The experimental results indicate that the algorithms using clustering is similar to Best N and better than GroupLens for prediction accuracy. The results also demonstrate that the algorithm using clustering produces the best performance according to the standard deviation of error rate. This means that the algorithm using clustering gives the most stable and the best uniform recommendation. In addition, the algorithm using clustering reduces the time of recommendation.

• Journal of Information Processing Systems
• /
• v.7 no.1
• /
• pp.93-102
• /
• 2011

In deeply scaled CMOS technologies, two major non-ideal factors are threatening the survival of the CMOS; i) PVT (process, voltage, and temperature) variations and ii) leakage power consumption. In this paper, we propose a novel post-silicon tuning methodology to scale optimum voltage and frequency "dynamically". The proposed design technique will use our PVT sensor circuits to monitor the variations and based on the monitored variation data, voltage and frequency will be compensated "automatically". During the compensation process, supply voltage is dynamically adjusted to guarantee the minimum total power consumption without violating the frequency requirement. The simulation results show that the proposed technique can reduce the total power by 85% and the static power by 53% on average for the selected ISCAS'85 benchmark circuits with 45 nm CMOS technology compared to the results of the traditional PVT compensation method.