• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.58.1-58.1
• /
• 2019

We have developed Ground Software (GSW) of BITSE. The ground software includes mission operation software, data visualization software and data processing software. Mission operation software is implemented using COSMOS. COSMOS is a command and control system providing commanding, scripting and data visualization capabilities for embedded systems. Mission operation software send commands to flight software and control coronagraph. It displays every telemetry packets and provides realtime graphing of telemetry data. Data visualization software is used to display and analyze science image data in real time. It is graphical user interface (GUI) and has various functions such as directory listing, image display, and intensity profile. The data visualization software shows also image information which is FITS header, pixel resolution, and histogram. It helps users to confirm alignment and exposure time during the mission. Data processing software creates 4-channel polarization data from raw data.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.512-514
• /
• 2004

The Electro-Optical Camera (EOC) is a high spatial resolution, visible imaging sensor which collects visible image data of the earth's sunlit surface and is the primary payload on KOMPSAT-l. The purpose of the EOC payload is to provide high resolution visible imagery data to support cartography of the Korean Peninsula. The EOC is a push broom-scanned sensor which incorporates a single nadir looking telescope. At the nominal altitude of 685Km with the spacecraft in a nadir pointing attitude, the EOC collects data with a ground sample distance of approximately 6.6 meters and a swath width of around 17Km. The EOC is designed to operate with a duty cycle of up to 2 minutes (contiguous) per orbit over the mission lifetime of 3 years with the functions of programmable gain/offset. The EOC has no pointing mechanism of its own. EOC pointing is accomplished by right and left rolling of the spacecraft, as needed. Under nominal operating conditions, the spacecraft can be rolled to an angle in the range from +/- 15 to 30 degrees to support the collection of stereo data. In this paper, the status of EOC such as temperature, dark calibration, cover operation and thermal control is checked and analyzed by continuously monitored state of health (SOH) data and image data during the mission life of 3 years. The aliveness of EOC and operation continuation beyond mission life is confirmed by the results of the analysis.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.167-174
• /
• 2017

Earthwork is to level or excavate the ground to provide a space for installing structures. A large number of construction equipment such as excavators, dozers, and dump trucks are put into the earthwork operation. The equipment operators need to constantly communicate with each other during the operation. In the earthwork operation, therefore, the process should be analyzed on the equipment operation to improve the effectiveness of communication. The objective of this study is to understand the earthwork process, and improve the effectiveness of data interface by adopting the smart glass technology. In the study, the general process of earthwork is modeled using a process diagram. The data that is generated during the process is modeled using a class diagram. A database is developed to store and reuse the data. The smart glass technology is adopted to develop a data interface during the earthwork operation. The result of the prototype showed that the technology can improve the data interface during excavation overcoming the shortcomings of hand or sound signals.

• Korean Journal of Remote Sensing
• /
• v.15 no.4
• /
• pp.357-365
• /
• 1999

The optical sensors of Electro-Optical Camera (EOC) and Ocean Scanning Multi-spectral Imager (OSMI) aboard the KOrea Multi-Purpose SATellite (KOMPSAT) will be placed in a sun synchronous orbit in late 1999. The EOC and OSMI sensors are expected to produce the land mapping imagery of Korean territory and the ocean color imagery of world oceans, respectively. Utilization of the EOC and OSMI data would encompass the various fields of science and technology such as land mapping, land use and development, flood monitoring, biological oceanography, fishery, and environmental monitoring. Readiness of data support for user community is thus essential to the success of the KOMPSAT program. As a part of testing such readiness prior to the KOMPSAT launch, we have performed the preliminary acceptance test for the KOMPSAT data processing system using the simulated EOC and OSMI data sets. The purpose of this paper is to demonstrate the readiness of the KOMPSAT data processing system, and to help data users understand how the KOMPSAT EOC and OSMI data are processed, archived, and provided. Test results demonstrate that all requirements described in the data processing specification have been met, and that the image integrity is maintained for all products. It is however noted that since the product accuracy is limited by the simulated sensor data, any quantitative assessment of image products can not be made until actual KOMPSAT images will be acquired.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.4
• /
• pp.97-110
• /
• 2022

The purpose of this study is to analyze the level of public data convergence capabilities of administrative organizations and to explore important variables in data-based organizational capabilities. The theoretical background was summarized on public data and use activation, joint use, convergence, administrative organization, and convergence constraints. These contents were explained Public Data Act, the Electronic Government Act, and the Data-Based Administrative Act. The research model was set as the data-based organizational capabilities effect by a data-based administrative capability, public data operation capabilities, and public data operation constraints. It was also set whether there is a capabilities difference data-based on an organizational operation by the level of data convergence capabilities. This study analysis was conducted with hierarchical cluster analysis and multiple regression analysis. As the research result, First, hierarchical cluster analysis was classified into three groups. It was classified into a group that uses only public data and structured data, a group that uses public data on both structured and unstructured data, and a group that uses both public and private data. Second, the critical variables of data-based organizational operation capabilities were found in the data-based administrative planning and administrative technology, the supervisory organizations and technical systems by public data convergence, and the data sharing and market transaction constraints. Finally, the essential independent variables on data-based organizational competencies differ by group. This study contributed. As a theoretical implication, this research is updated on management information systems by explaining the Public Data Act, the Electronic Government Act, and the Data-Based Administrative Act. As a practical implication, the activity reinforcement of public data should be promoting the establishment of data standardization and search convenience and elimination of the lukewarm attitudes and Selfishness behavior for data sharing.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1737-1745
• /
• 2000

In the last decade, considerable research effort has been studied ot multi-dimensional GIS and many spatiotemporal operations and query languages have been proposed. Many of them have focused on designing of operation, which process with data that is valid at current point in time. But, research that studied to updata operation that updates or inserts the past data is very rare. This paper designs an update operation and an insertion operation for integrity of past data of multi-dimensional GIS, and propose a new data model for efficient processing of the operations.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.64-66
• /
• 2006

DATS will connect with IMPS and LHGS to perform the reception of sensor data and the transmission of user's meteorological data, LRIT and HRIT. MODEM/BB will perform the de-commutation of received sensor data as MI and GOCI raw data according to VCID before sending them to MI and GOCI IMPS, respectively. Especially, MODEM/BB in SOC needs to be connected to six clients that consist of the primary and backup IMPS of MSC, KOSC and SOC. On the other hand, LRIT and HRIT delivered from LHGS are encoded as VITERBI and modulated by MODEM/BB. Considering sensor data transmitted from COMS, the assumed format and size of CADU are described in this paper. Finally, results related to the status of received LRIT and HRIT by frame synchronizer in user station are also described.

• Journal of Information Processing Systems
• /
• v.16 no.6
• /
• pp.1359-1371
• /
• 2020

In transmitting and receiving such a large amount of data, reliable data communication is crucial for normal operation of a device and to prevent abnormal operations caused by errors. Therefore, in this paper, it is assumed that an error correction code (ECC) that can detect and correct errors by itself is used in an environment where massive data is sequentially received. Because an embedded system has limited resources, such as a low-performance processor or a small memory, it requires efficient operation of applications. In this paper, we propose using an accelerated ECC-decoding technique with a graphics processing unit (GPU) built into the embedded system when receiving a large amount of data. In the matrix-vector multiplication that forms the Hamming code used as a function of the ECC operation, the matrix is expressed in compressed sparse row (CSR) format, and a sparse matrix-vector product is used. The multiplication operation is performed in the kernel of the GPU, and we also accelerate the Hamming code computation so that the ECC operation can be performed in parallel. The proposed technique is implemented with CUDA on a GPU-embedded target board, NVIDIA Jetson TX2, and compared with execution time of the CPU.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.60.1-60.1
• /
• 2015

We present the current operation status of StarDB web services by showing its user access statistics. The StarDB web services started its operation in late November, allowing world-wide users to access results of new variability analysis for Northern Sky Variability Survey light curves. New analysis results of various time-series data have been added to the StarDB services. Importantly, our services have supported a simple cone search, which is an internationally well-defined catalog search interface in the international Virtual Observatory systems. We have collected user access statistics such as how users find our analysis data since its operation in later November. We expect our analysis of the StarDB operation to help Korean community members who plan and operate their own web services preparing for a future era of big survey data.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.3
• /
• pp.150-157
• /
• 1996

In this paper, to develop a smart CAD/CAM system for systematically performing from the 3-D solid shape design of products to the CNC cutting operation of products by a machining center, a B-Rep solid modeler is realized based on the half edge data structure. Because the B-Rep solid modeler has the various capabilities related to the solid definition functions such as the creation operation of primitives and the translational and rotational sweep operation, the solid manipulation functions such as the split operation and the Boolean set operation, and the solid inversion function for effectively using the data structure, the 3-D solid shape of products can be easily designed and constructed. Also, besides the automatic generation of CNC code, the B-Rep solid modeler can be used as a powerful tool for realizing the automatic generation of finite elements, the interfer- ence check between solids, the structural design of machine tools and robots and so on.