• Korean journal of applied entomology
• /
• v.58 no.4
• /
• pp.347-354
• /
• 2019

Temperature-dependent traits of Laodelphax striatellus, rice stripe virus vector, were investigated at 10 constant temperatures (12.5, 15.0, 17.5, 20.0, 22.5, 25.0, 27.5, 30.0, 32.5, and 35.0 ± 1℃) under a fixed photoperiod (14/10-hr light/dark cycle). Unit functions for the oviposition model were estimated and implemented into a population dynamics model using DYMEX. The longevity of L. striatellus adults decreased with increasing temperature (56.0 days at 15.0℃ and 17.7 days at 35.0℃). The highest total fecundity (515.9 eggs/female) was observed at 22.5℃, while the lowest (18.6 eggs/female) was observed at 35.0℃. Adult developmental rates, temperature-dependent fecundity, age-specific mortality rates, and age-specific cumulative oviposition rates were estimated. All unit equations described adult performances of L. striatellus accurately (r² =0.94~0.97). After inoculating adults, the constructed model was tested under pot and field conditions using the rice-plant hopper system. The model output and observed data were similar up to 30 days after inoculation; however, there were large discrepancies between observed and estimated population density after 30 days, especially for 1^st and 2^nd instar nymph densities. Model estimates were one or two nymphal stages faster than was observed. Further refinement of the model created in this study could provide realistic forecasting of this important rice pest.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.2
• /
• pp.75-88
• /
• 2017

This study analyzed wind flows based on spatial and geomorphological characteristics of Daegu Metropolitan City. A three-stage analysis was performed, starting with a comparison of meteorological relationships between local wind direction (synoptic wind) and local wind flow. In the second stage the study area was subdivided into districts and suburban districts to analyze the relative change of local wind flow. In stage three, the formation of wind corridor for local wind flow, wind flow for the entire urban space, and spatial relationships between flows were verified comparatively using KLAM_21. Three results are notable, the first of which is a low correlation between synoptic wind of a region, and local wind, flow in terms of meteorology. Secondly, observations of local wind flow at five downtown districts and two suburban districts showed that there were diverse wind directions at each measurement point. This indicates that the spatial and geomorphological characteristics of areas neighboring the measurement points could affect the local wind flow. Thirdly, verifying the results analyzed using KLAM_21, compared to Atomatic Weather System(AWS) measurement data, confirmed the reliability of the numerical modelling analysis. It was determined that local wind flow in a city performs a spatial function and role in ameliorating the urban heat island phenomena. This indicates that, when an urban planning project is designed, the urban heat island phenomena could be ameliorated effectively and sustainably if local wind flow caused by immediate spatial and geomorphological characteristics is confirmed systematically and techniques are intentionally applied to connect the flows spatially within areas where urban heat islands occur.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.227-242
• /
• 2012

This study is to experientially verify that market orientation affect organizational performance toward social service marketization. social service marketization put pressure upon financial environment in nonprofit human service organizations and exacerbate competition between nonprofit human service organizations and profit organizations each other. For survival, nonprofit human service organizations in social service market where various supply organization participate needs sensitivity to the environment. For this purpose the need of introduction of market orientation is being raised. At this point this study is useful that measure the level of market orientation and analysis impact of market orientation toward organizational performance in nonprofit human service organizations. Data was collected from busan nonprofit human service organizations in participate voucher program, number of total organization is 92. The level of market orientation was 3.63. Analysis of the impact of market orientation to organizational performance used regression analysis through structural equation modelling. As a result of the analysis, market orientation was affected by organizational performance. Based on the results, this study suggests that nonprofit human service organizations should need market orientation centered organization management and sensitive response toward external environment.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.2
• /
• pp.67-73
• /
• 2007

A respiration rate analysed by enzyme kinetics-based respiration model and gas permeability data of LDPE film were applied to design the optical modified atmosphere (MA) packaging condition of persimmon (Diospyros kaki cv. Fuyu) fruits. The fruit quality rapidly decreases due to physiology disorder such as softening and peel blackening. $O_2$ permeance ($Q_{O2}$ in $ml{\cdot}hr^{-1}{\cdot}atm^{-1}{\cdot}m^{-2}$) and $CO_2$ performance ($Q_{CO2}$ in $ml{\cdot}hr^{-1}{\cdot}atm^{-1}{\cdot}m^{-2}$) of low density polyethylene (LDPE) film samples were measured at $0^{\circ}C$ and described as function of thickness (L in ${\mu}m$) as $Q_{O2}=(2540{\times}1/L)-16$, and $Q_{CO2}=(13742{\times}1/L)-70$, respectively. MA package containing single persimmon fruit of 225g was designed and tested experimentally at $0^{\circ}C$ by using LDPE films. Package atmospheres predicted from the relationship of $O_2$, $CO_2$ and $N_2$ balances on the packages was in good agreement with those obtained experimentally. Physiology disorder occurrence was the lowest at 52 ${\mu}m$ package that attained optimum gas condition ($O_2$ 2.8% and $CO_2$ 5.4%). The computer simulation was found to be effective to help to design the optimum MA packaging condition of individual persimmon fruit.

• Korean Journal of Child Education & Care
• /
• v.18 no.2
• /
• pp.183-202
• /
• 2018

The purpose of this study was to examine structural relationships among directors' coaching leadership, organizational culture, early childhood teachers' empowerment, teacher-efficacy and job satisfaction. The data were collected from 575 early childhood teachers and analyzed with Pearson's correlation and structural equation modelling analysis. The results were as follows: first, directors' coaching leadership was found to have a direct effect on early childhood teachers' job satisfaction and an indirect effect through organizational culture, teachers'empowerment and teacher-efficacy. Second, organizational culture was found to have a direct effect on early childhood teachers' job satisfaction and an indirect effect through teacher-efficacy. Third, early childhood teachers' empowerment was found to have a direct effect on job satisfaction and an indirect effect through teacher-efficacy. Fourth, teachers' teacher efficacy was found to have a direct effect on job satisfaction. Additionally, directors'coaching leadership was found to be the most important variable predicting early childhood teachers' job satisfaction. These results suggest that improving directors'coaching readership, organizational culture, teachers' empowerment, teacher-efficacy could help facilitate early childhood teachers'job satisfaction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5B
• /
• pp.405-414
• /
• 2011

The adaptive network-based fuzzy inference system (ANFIS) which had a success for time series prediction and system control was applied for modeling the hourly runoff in the Gapcheon watershed. The ANFIS used the antecedent rainfall and runoff as the input. The ANFIS was trained by varying the various simulation factors such as mean areal rainfall estimation, the number of input variables, the type of membership function and the number of membership function. The root mean square error (RMSE), mean peak runoff error (PE), and mean peak time error (TE) were used for validating the ANFIS simulation. The ANFIS predicted runoff was in good agreement with the measured runoff and the applicability of ANFIS for modelling the hourly runoff appeared to be good. The forecasting ability of ANFIS up to the maximum 8 lead hour was investigated by applying the different input structure to ANFIS model. The accuracy of ANFIS for predicting the hourly runoff was reduced as the forecasting lead hours increased. The long-term predictability of ANFIS for forecasting the hourly runoff at longer lead hours appeared to be limited. The ANFIS might be useful for modeling the hourly runoff and has an advantage over the physically based models because the model construction of ANFIS based on only input and output data is relatively simple.

• Journal of Korea Water Resources Association
• /
• v.35 no.5
• /
• pp.525-539
• /
• 2002

Effects of Yongdam Dam discharge conditions on water quality of the Keum River and Daechung Lake inflow were analyzed for various scenarios using WASP5 water quality model. Three different groups of scenarios were tested: 1) Two different weather conditions; the lowest flow year and the highest flow year since the beginning of Daechung Dam operation in 1981, 2) Fine discharge flow rates; 5.4, 8.9, 12.4, 16.4 ㎥/s and field observed flow during the study period, 3) Three conditions of discharge water quality; first grade, second grade by Korean water quality standard and field observed water quality. Effect of changes in Yongdam Dam discharges was greater for dry year. The increase of discharge from the Yongdam Dam will improve water quality of downstream areas only when the water quality of the discharge is equal or better than that of downstream areas. Field observed water qualify data show that BOD concentrations are lower than first grade level but TN and TP concentrations are exceeding 5th and 3rd grade level in Korean standard, respectively. Considering that nutrient control methods in watershed areas of Yongdam dam are limited, it is expected that nutrient concentrations from Yongdam Dam discharge will be higher than 2nd grade water quality standard level. Therefore, it would be important to develop practical management strategies in the watershed area of Yongdam Dam based on field conditions for conservation of water quality in downstream areas.

• Journal of Korea Water Resources Association
• /
• v.37 no.11
• /
• pp.969-978
• /
• 2004

According to the report of hydrologic modeling study, from a quantitative point of view, a lumped model is more efficient than a distributed model. A distributed model has to simplify geospatial characteristics for the shake of restricted application on computer calculation and field observation. In this reason, a distributed model can not help having some errors of water quantity modelling. However, considering a distribution of rainfall-runoff reflected spatial characteristics, a distributed model is more efficient to simulate a flow of surface water, The purpose of this study is modeling of spatial rainfall-runoff of surface water using grid based distributed model, which is consisted of storage function model and essential basin-channel parameters( slope, flow direction & accumulation), and that procedure is able to be executed at a personal computer. The prototype of this model is developed in Heongseong Multipunose Dam basin and adapted in Hapchon Multipurpose Dam basin, which is larger than the former about five times. The efficiency coefficients in result of two dam basin simulations are more than about 0.9, but ones at the upstream water level gauge station meet with bad result owing to overestimated rating curves in high water level. As a result of this study, it is easily implemented that spatially distributed rainfall-runoff model using GIS, and geophysical characteristics of the catchment, hereafter it is anticipated that this model is easily able to apply rainfall data by real time.

• Journal of Internet of Things and Convergence
• /
• v.6 no.3
• /
• pp.75-80
• /
• 2020

Recently, the size of the IoT sensor has been decreased and the collecting direction of the IoT sensor for acquiring the data have been changed from 2D to 3D. It makes sensor structure complex. In the fabrication of the complex structure, 3D printing technology has more useful than traditional manufacturing technologies. Among 3D printing technologies, FDM (fused deposition modeling) is a candidate technology to fabricate a small IoT sensor because the price of the machine and the material is cheap. In the FDM process, a 3D shape is made by depositing the melted filament. Recently, the patent of FDM technology is expired and cheat machines are developed based on the open-source. In the FDM process, mechanical properties of a fabricated part is affected by a lots of factors such as the kind of material and process parameters. Among them, infill is affecting the mechanical properties and the production lead time as well. In this work, a new method to optimize the FDM process with the consideration of mechanical property and production lead time was proposed. To verify the method, the fabrications were performed with the different infill rates. The results of tensile tests were analyzed to verify the proposed method.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.2
• /
• pp.35-46
• /
• 2008

Soil moisture is one of the important components in hydrological processes and also controls the subsurface flow mechanism at a hillslope scale. In this study, time series of soil moisture were measured at a hillslope located in Gwangneung National Arboretum, Korea using a multiplex Time Domain Reflectometry(TDR) system measuring soil moisture with bi-hour interval. The Box-Jenkins transfer function and noise model was used to estimate spatial distributions of soil moisture histories between May and September, 2007. Rainfall was used as an input parameter and soil moisture at 10 cm depth was used as an output parameter in the model. The modeling process consisted of a series of procedures(e.g., data pretreatment, model identification, parameter estimation, and diagnostic checking of selected models), and the relationship between soil moisture and rainfall was assessed. The results indicated that the patterns of soil moisture at different locations and slopes along the hillslope were similar with those of rainfall during the measurment period. However, the spatial distribution of soil moisture was not associated with the slope of the monitored location. This implies that the variability of the soil moisture was determined more by rainfall than by the slope of the site. Due to the influence of vegetation activity on soil moisture flow in spring, the soil moisture prediction in spring showed higher variability and complexity than that in early autumn did. This indicates that vegetation activity is an important factor explaining the patterns of soil moisture for an upland forested hillslope.