• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.457-467
• /
• 2010

The settlement prediction is very important to preloading method for a construction site on a soft ground. At the design stage, however, it is hard to predict the settlement exactly due to limitations of the site survey. Most of the settlement prediction is performed by a regression settlement curve based on the field data during a construction. In Korea, hyperbolic method has been most commonly used to align the settlement curve with the field data, because of its simplicity and many application cases. The results from hyperbolic method, however, may be differed by data selections or data fitting methods. In this study, the analyses using hyperbolic method were performed about the field data of $\bigcirc\bigcirc$ site in Pusan. Two data fitting methods, using an axis transformation or an alternative method, were applied with the various data group. If data was used only after the ground water level being stabilized, fitting results using both methods were in good agreement with the measured data. Without the information about the ground water level, the alternative method gives better results with the field data than the method using an axis transformation.

• Journal of Environmental Science International
• /
• v.25 no.10
• /
• pp.1389-1396
• /
• 2016

A monitoring system for a field magnetometer was configured with assistance of a Raspberry Pi as a data logger. The suggested geomagnetic system uses a semi-real-time data transmission module. The system consists of two parts: a field-observation part and a data-center part. The field-observation part comprises a Raspberry Pi, magnetometer, LTE router, and power source, while the data center part takes samples at the site. The collected magnetometer data are then sent to the data center through the LTE router. The newly designed monitoring system was deployed and checked in Jeju-do island, and found to operate stably. The suggested system is promising in that it is simple and cost saving, providing at least physical insight and knowledge on the complex natural phenomena.

• Wind and Structures
• /
• v.28 no.4
• /
• pp.239-253
• /
• 2019

Accurate numericalsimulation of wind field over complex terrain is an important prerequisite for wind resource assessment. In this study, numerical simulation of wind field over complex terrain was further carried out by taking the complex terrain around Siu Ho Wan station in Hong Kong as an example. By artificially expanding the original digital model data, Gambit and ICEM CFD software were used to create high-precision complex terrain model with high-quality meshing. The equilibrium atmospheric boundary layer simulation based on RANS turbulence model was carried out in a flat terrain domain, and the approximate inflow boundary conditions for the wind field simulation over complex terrain were established. Based on this, numerical simulations of wind field over complex terrain under different inflow wind directions were carried out. The numerical results were compared with the wind tunnel test and field measurement data for land and sea fetches. The results show that the numerical results are in good agreement with the wind tunnel data and the field measurement data which can verify the accuracy and reliability of the numerical simulation. The near ground wind field over complex terrain is complex and affected obviously by the terrain, and the wind field characteristics should be fully understood by numerical simulation when carrying out engineering application on it.

• Journal of Applied Reliability
• /
• v.18 no.3
• /
• pp.250-259
• /
• 2018

Purpose: Previously, missile reliability prediction is based on theoretical failure prediction model. It has shown that the predicted reliability is inadequate to real field data. Although an MTTF based reliability prediction method using real field data has recently been studied to overcome this issue. In this paper, we present a more realistic method, considering MTBF concept, to predict missile reliability. Methods: In this paper we proposed a modified survival model. This model is considering MTBF as its core concept, and failed missiles in the model are to be repaired and redeployed. We compared the modified model (MTBF) and the previous model (MTTF) in terms of fitness against the real failure data. Results: The reliability prediction result of MTBF based model is closer to fields failure data set than that of MTTF based model. Conclusion: The proposed MTBF concept is more fitted to real failure data of missile than MTTF concept. The methodology of this study can be applied to analyze field failure data of other similar missiles.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.819-826
• /
• 2000

This study was performed to develop a measurement system of tractor field performance for plow and rotary operations. Measurement system for tractor consisted of torque sensors to measure torque of drive axles and PTO axle, speed sensors to measure rotational speed of drive axles and engine, microcomputer to control data logger, and data logger as I/O interface system. The measurement system was installed on four-wheel-drive tractor. Four-element full-bridge type strain gages were used for torque measurement of drive axles and optical encoders were used to measure speeds of drive axles and engine. Slip rings were mounted on the rotational axles. Signals from sensors were inputted to data logger that was controlled by microcomputer with parallel communication. Sensors were calibrated before the field tests. Regression equations were found on completion of the calibrations. The field experiment was performed at paddy fields and uplands. Rotary and plow were used when the tractor was operated in the field. Travelling speeds of the tractor were 1.9 km/h, 2.7 km/h, 3.7 km/h, 5.5 km/h, 8.2 km/h, and 11.8 km/h. Operating depths of implements were maintained approximately 20cm during the tests. Torque data of drive axles were different at each location during plow and rotary operations. Results showed that torque of rear axles were greater than those of front axles. Total torque were 6860 - 11064 Nm at the upland and 7360 - 14190 Nm at the paddy field for plow operations. It was found that torque at the paddy field were about 20% greater than those at the upland for plow operations. Torque data showed that rotary operations required less power than plow operation at the paddy field and the upland. Torque measurements at each axle for rotary operations were only 8 - 16% of plow operations in the upland and 15 - 20% in the paddy field.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.391-394
• /
• 2007

The field survey of a tsunami damage is carried out to collect and obtain real data. There data can be used to make the countermeasures against possible tsunami attackings. In the survey, many data collecting techniques such as interviewing with local people, taking pictures of the inundated field, recording the location by the GPS, measuring the level and distance of the maximum flood level can be used for practical and effective survey.

• Journal of Korean Library and Information Science Society
• /
• v.51 no.4
• /
• pp.83-100
• /
• 2020

The importance of data publishing in the open-science era is increasing as it can contribute to other scientific discoveries by accelerating the sharing of research data, improving accessibility and citability, and providing standardized technical documentation for research data. In addition, the need for data papers is emerging as a way for data papers to maintain a status equivalent to research papers, and the publication of data journals is on the rise as a new type of scholarly publishing. In particular, the field of Ecology is a field where large-scale research data are produced and managed, thus the data journal publishing in this field is active worldwide. On the other hand, the research on data journal is in its early stages in Korea, and there is no data journal in the field of Ecology. Thus, this study explores and presents strategies for publishing data journals in the ecological field. First, we investigate the publishing status of domestic and international data journals and the publication status of domestic journals. Then, we conducted a focused group interview with experts of scholarly publishing, open access policy and journal publishing in the field of Ecology. Finally, based on the survey and the expert FGI's results, strategies are suggested in terms of publishing data journals in the field of ecology, organizing and publishing journals, organizing journal editors, and receiving manuscripts.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.3
• /
• pp.83-89
• /
• 2008

Estimations of paddy field area are important for agricultural water supply planning. Especially these estimations have to be excused by drainage basin. In this research, we developed a paddy field estimation model considering shift-share effects such as national growing, structural, local effects. National growing effects are estimated by adopting the result of KREI-ASMO model which predict farm land area in national level. Paddy field structural effects are estimated using statistical data about farmhouse numbers and cultivation areas. Local allocation effects are calculated by differences of estimations and real data. The results using data from 1998 to 2003 show that developed model estimates 2006 paddy field areas in each province in 5% error and is applicable to predict future change of paddy field.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1752-1761
• /
• 2000

This paper describes the far-field estimation using the near-field measurement data. Measurement in far-field region gives us the acoustical characteristics of the source but in general measurement is made in near-field such as acoustic water tank or anechoic chamber, so far-field acoustical characteristics of the source should be predicted from near-field data. In this case, the number of measurement points in the near field which relates to the accuracy of the predicted field and the amount of data processing, should be optimized. Existing papers say that measurement points is proportional to kL and depends on geometry and directivity of the source. But they do not give us any definite criterion for the required number of measurement points. Boundary Collocation Method which is one of the far-field prediction methods, is analyzed based on Helmholtz integral equation and Green function and it has been found that the number of measurement points is optimized as 0.54kL which is about one half of the existing results.

• Journal of the Korean Society for information Management
• /
• v.37 no.3
• /
• pp.77-106
• /
• 2020

In this study, we proposed a method to systematically manage research data in the field of condensed matter physics, which is the most active and interdisciplinary field. In the course of the research, a questionnaire was conducted for researchers in the field of condensed matter physics. The questionnaire was constructed based on the research data management tool Data Asset Framework (DAF) and the FAIR principle for data sharing and reuse. The current status of research data management in the field of aggregated material physics was collected from 14 researchers. The collected data consisted of data on the characteristics and basic information of researchers who answered the questionnaire, data preservation and management, and data sharing and access. By analyzing the collected questionnaire results, nine problems were drawn about the characteristics of research data in the field of aggregate material physics, data collection and production, data preservation and management, data sharing and access. In this study, suggestions were made to improve the problems derived from each aspect.